Pukapuka Kaiwhakamahi mō te Papu Tango Waipiro a Diversitech FP-22

1. Kupu Whakataki

This manual provides essential instructions for the installation, operation, and maintenance of the Diversitech FP-22 Condensate Removal Pump. The FP-22 is designed to efficiently manage condensate water from furnaces and boilers, particularly in applications involving acidic and high-temperature conditions, up to 190°F (88°C).

Key features include a 22-foot maximum lift, steam-resistant electronics, vibration-dampening rubber feet, metal hang tabs for secure mounting, a built-in safety overflow switch, a check valve, and LED status indicators. The pump comes with four inlet holes, integrated P-traps, and 20 feet of 3/8" discharge tubing for a complete setup.

Whakaahua 1.1: Taha-mua view of the Diversitech FP-22 Condensate Removal Pump. This image shows the overall design of the pump, including the red base and black motor housing.

2. Nga Korero Haumaru Nui

Tena panuihia nga tohutohu katoa i mua i te whakaurunga me te mahi. Ki te kore e whai i enei tohutohu ka pa mai pea te kino o nga rawa, te whara whaiaro, te mate ranei.

• Me momotu te hiko mai i te waeine i mua i te mahi i tētahi mahi tiaki, ratonga rānei.
• Me whakarite kua tāutahia te papu e tetahi tohunga whai tohu, e ai ki ngā ture hiko me ngā ture putorino ā-rohe.
• Kaua e whakahaeretia te papu ki te pakaru te taura hiko, te mono ranei.
• This pump is designed for condensate removal only. Do not use it for flammable liquids or other applications.
• Kia matara atu nga ringaringa me nga taonga ke i nga waahanga neke.
• The pump is rated for 120V. Ensure the power supply matches this requirement.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• Diversitech FP-22 Condensate Removal Pump (120V)
• 20 feet of 3/8" discharge tubing
• He pukapuka whakauru me te mahi (tenei tuhinga)

4. Tohutohu Tāuta

4.1 Te Whakapiki i te Puma

The FP-22 pump can be mounted on a flat surface or suspended using the integrated metal hang tabs. For optimal noise reduction and stability, utilize the vibration-dampening rubber feet.

• Choose a stable, level location near the condensate source.
• If suspending, ensure the mounting surface is secure and can support the pump's weight when full.

Whakaahua 4.1: Taha view of the FP-22 pump, highlighting the metal hang tabs for secure mounting.

4.2 Condensate Inlet Connection

The pump features four inlet holes with built-in "P" traps. Connect the condensate drain line from your furnace or boiler to one of these inlets.

• Ensure a tight, leak-free connection.
• The integrated P-traps prevent odors and gases from entering the system.

4.3 Discharge Line Connection

Connect the provided 3/8" discharge tubing to the pump's discharge outlet. Route the tubing to a suitable drain location, ensuring a continuous downward slope if possible, or a clear path for the pump to lift the water.

• Avoid kinks or sharp bends in the discharge tubing.
• Secure the tubing to prevent accidental dislodgement.
• The pump includes a check valve to prevent backflow.

Whakaahua 4.2: Runga view of the FP-22 pump, illustrating the four inlet ports and the discharge connection point.

4.4 Hononga Hiko

Connect the pump's power cord to a dedicated 120V electrical outlet. Ensure the outlet is properly grounded and protected by a circuit breaker.

• Kaua e whakamahi i nga taura toronga.
• Manatokohia kei te ōrite te pūhiko ki te kaha o te paputage whakaritenga.

5. Mahi

The Diversitech FP-22 operates automatically. When condensate water fills the reservoir to a predetermined level, the internal float switch activates the pump, which then discharges the water through the discharge tubing. Once the water level drops, the pump deactivates.

5.1 Tohu LED

The pump is equipped with LED indicators to provide status updates:

• Arahina hiko: Indicates the pump is receiving electrical power.
• Whakahaerehia te LED: Illuminates when the pump motor is actively running.
• Arahina whakaoho: Activates if the water level reaches the high-level safety overflow switch, indicating a potential issue.

5.2 Safety Overflow Switch

A built-in safety overflow switch provides an additional layer of protection. If the water level rises above the normal operating range, this switch will activate, typically shutting down the connected HVAC equipment to prevent overflow and water damage. Consult your HVAC system's manual for wiring instructions for this safety feature.

6. Tiaki

Regular maintenance ensures optimal performance and extends the life of your condensate pump.

6.1 Te horoi i ia wa

• Momotu Mana: Always unplug the pump from the electrical outlet before cleaning.
• Drain Reservoir: Remove any remaining water from the reservoir.
• Pua Puawai: Use a mild detergent and warm water to clean the inside of the reservoir, removing any sludge or debris. Pay attention to the float switch mechanism to ensure it moves freely.
• Tirotiro ngongo: Check the inlet and discharge tubing for blockages or signs of wear.
• Huihuia: Reconnect all tubing and plug the pump back into the power outlet.

Perform this cleaning at least once every six months, or more frequently if the condensate quality is poor or the pump is in heavy use.

7. Te Raru

This section addresses common issues you might encounter with your FP-22 condensate pump.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the official Diversitech webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Puritia to riiki hoko hei tohu mo te hoko.

Kaihanga: DiversiTech Corporation

Webpae: www.diversitech.com (Exoampte hono, ka rereke pea te hono pono)

For service or parts, please contact a qualified HVAC technician or the manufacturer directly.