1. Kupu Whakataki
This manual provides comprehensive instructions for the Blackstar HT Club 40 Mark II 40-Watt 1x12 Tube Combo Amp. It covers essential information for setup, operation, maintenance, and troubleshooting, ensuring optimal performance and longevity of your amplifier. The HT Club 40 Mark II features revoiced clean and overdrive channels, Blackstar's Infinite Shape Feature (ISF), two reverb textures, and a speaker-emulated output.
Please read this manual thoroughly before operating your amplifier to ensure safe and correct usage.
2. Nga Tohutohu Haumaru Nui
- Pānui Tohutohu: Puritia tenei pukapuka hei tohutoro a meake nei.
- Whakarongo Whakatupato: Follow all warnings on the ampkaiwhakaora me roto i tēnei pukapuka ā-ringa.
- Wai me te makuku: Kaua e whakamahi i tenei taputapu ki te taha o te wai, ka waiho ranei kia pakaru, kia pakaru ranei.
- wera: Kaua e whakauruhia ki te taha o nga puna wera penei i nga radiators, nga rehita wera, nga umu, me etahi atu taputapu (tae atu ki ampkaiwhakaora) e whakaputa ana i te wera.
- Waea Hiko: Tiakina te taura hiko kei hikoi, ka kowhakina mai ranei.
- Ratonga: Tukuna nga ratonga katoa ki nga kaimahi ratonga whai tohu. Ka hiahiatia he ratonga ina kua pakaru nga taputapu i tetahi huarahi, penei i te taura hiko, te mono ranei kua pakaru, kua maringi te wai, kua taka ranei nga taonga ki roto i te taputapu, kua kitea te taputapu ki te ua, ki te makuku ranei, kaore e mahi noa. , kua tukuna ranei.
- Whakahau: Do not block any ventilation openings. Ensure proper airflow around the ampkaikawe
- Whakapapa: Tenei amplifier must be grounded. Do not defeat the safety purpose of the polarized or grounding-type plug.
- Ngongo: ngongo ampka mahi ngā kaiwhakaora i te nui o te hikotages and generate significant heat. Do not attempt to replace tubes or service the internal components unless you are a qualified technician.
3. Hua Neke Atuview
3.1 Mana Paewhiri Mua
The front panel provides access to all primary controls for shaping your amplifier's tone.
Whakaahua: Mua view of the Blackstar HT Club 40 Mark II ampkaiwhakaora. E whakaatu ana tēnei whakaahua i te amplifier's front face, including the Blackstar logo, speaker grille, and the entire control panel at the top. The control panel features input jacks, various knobs for Clean and Overdrive channels, EQ settings, Reverb, Master Volume, and Power/Standby switches.
- Tāuru: He hononga 1/4" hei hono i tō kitā.
- Hoera horoi:
- Rōrahi: Controls the overall output level of the clean channel.
- Nguru, Treble: Tone controls for the clean channel.
- Whakawhiti Reo: Alters the clean channel's voicing for different tonal characteristics.
- Overdrive Channel:
- Whiwhi: Whakahaere ana i te nui o te taraiwa nui rawa/whakapēhanga.
- Rōrahi: Controls the overall output level of the overdrive channel.
- Paoro, Waenganui, Takitoru: Tone controls for the overdrive channel.
- ISF (Āhuatanga Āhua Mutunga Kore): Sweeps between a 'British' and 'American' ampte reo whakapūmau.
- Whakawhiti Reo: Alters the overdrive channel's voicing.
- Reverb: Whakahaere ana i te taumata o te pānga whakaata mamati kua hangaia ki roto.
- Rōrahi Matua: Ka whakahaere i te rōrahi whakaputa whānui o te ampkaikawe
- Whakawhiti tūtatari: Places the amplifier in standby mode, allowing tubes to warm up or cool down without signal passing through.
- Whakawhiti Kaha: Ka huri te amplifier runga ranei atu.
3.2 Hononga Paewhiri Whakamuri
The rear panel provides various input and output connections for external devices and speaker configurations.
Whakaahua: Rear view of the Blackstar HT Club 40 Mark II amplifier. This image shows the back of the amplifier, detailing the mains input, fuse holder, speaker outputs, emulated output, effects loop (send/return), footswitch input, and USB audio port.
- Input Mains: For connecting the supplied power cable.
- HT Fuse: Main power fuse. Ensure correct rating is used for replacement.
- Putanga Tukuoro: Connections for external speaker cabinets. Ensure correct impedance matching (1x16 Ohm, 1x8 Ohm, 2x16 Ohm).
- Emulated Output: Provides a speaker-emulated signal for direct recording or connection to a PA system.
- Effects Loop (Send/Return): For connecting external effects pedals or processors.
- Takawaenga: Input for the supplied 2-way footswitch to switch channels and reverb.
- Ororongo USB: Hei hopu tika i te kōnae ki te rorohiko.
4. Tatūnga
4.1 Te Wetewete me te Whakanoho
Tango tupato te amplifier from its packaging. Place the ampWhakanohoia te mīhini whakamahana ki runga i tētahi mata pumau, papatahi, kia pai ai te hauhautanga huri noa i te waeine. Kaua e waiho ki te taha o ngā pūtake wera, ki te rā tika rānei.
4.2 Hononga Hiko
- Me whakarite te amplifier's power switch is in the 'OFF' position and the standby switch is in 'STANDBY'.
- Connect the supplied mains power cable to the 'Mains Input' on the rear panel and then to a suitable grounded power outlet.
4.3 Connecting Your Instrument and Speakers
- Connect your guitar to the 'Input' jack on the front panel using a high-quality instrument cable.
- If using an external speaker cabinet, connect it to the appropriate 'Speaker Outputs' on the rear panel, ensuring correct impedance matching. The internal speaker is 16 Ohm.
- For silent practice or recording, connect to the 'Emulated Output' or 'USB Audio' as needed.
5. Nga Tohutohu Whakahaere
5.1 Te Whakakaha me te Weto
- Whakahiko: With the standby switch in 'STANDBY', turn the 'Power' switch to 'ON'. Allow approximately 2-3 minutes for the tubes to warm up.
- After the warm-up period, switch the 'Standby' switch to 'ON' to activate the ampkaikawe
- Weto Whakakore: Switch the 'Standby' switch to 'STANDBY'.
- Turn the 'Power' switch to 'OFF'.
5.2 Channel Operation
- Hoera horoi: Use the 'Volume', 'Bass', and 'Treble' controls to dial in your desired clean tone. The 'Voice' switch provides additional tonal options.
- Overdrive Channel: Engage the overdrive channel using the footswitch or the front panel switch. Adjust 'Gain' for distortion level, 'Volume' for channel output, and 'Bass', 'Middle', 'Treble' for EQ. The 'ISF' control allows continuous blending between British and American amplifier characteristics. The 'Voice' switch offers further tonal variations.
5.3 Reverb and Master Volume
- Reverb: Adjust the 'Reverb' knob to control the amount of digital reverb applied to your sound.
- Rōrahi Matua: This control sets the overall output level of the amplifier, affecting both channels.
5.4 Emulated Output and USB Audio
- Emulated Output: Connect to a mixing console or recording interface for a speaker-emulated signal. This is useful for direct recording or live sound reinforcement without miking the speaker.
- Ororongo USB: Connect to your computer via a USB cable for direct digital recording. Refer to Blackstar's webpae tukutuku mō te tāutanga taraiwa me te hototahitanga pūmanawa.
5.5 Power Reduction
The HT Club 40 Mark II features a power reduction option, allowing you to switch between 40 Watts and 4 Watts output. This is ideal for achieving saturated tube tones at lower volumes for home practice or smaller venues. Consult the amplifier's specific controls for engaging this feature, typically found on the rear panel or via a dedicated switch.
6. Tiaki
6.1 Te horoi
Horoia te amplifier's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the ampKa momotuhia te hiko o te whakawerawera i mua i te horoinga.
6.2 Whakakapinga Ngongo
Vacuum tubes have a finite lifespan and will eventually need replacement. Symptoms of worn tubes include reduced output, loss of tone, or excessive noise. Due to high internal voltages and the need for proper biasing, tube replacement and biasing should only be performed by a qualified service technician. Incorrect biasing can lead to premature tube failure and damage to the ampkaikawe
6.3 Tiakitanga Whanui
- A ape i te whakaatu i te ampte whakamahana ki te tino mahana, ki te makuku ranei.
- Kawea te amplifier carefully to prevent physical damage.
- Always use appropriate speaker cables for connections; never use instrument cables for speakers.
7. Te Raru
If you experience issues with your Blackstar HT Club 40 Mark II, consult the following table. For problems not listed or if issues persist, contact qualified service personnel.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau he tangi | Power not on, standby engaged, faulty cable, speaker disconnected, faulty tube. | Ensure power is on and standby is disengaged. Check all cables. Verify speaker connection. Consult technician for tube issues. |
| He oro ngoikore, he kino ranei | Worn tubes, incorrect settings, faulty instrument/cable. | Check gain and volume settings. Test with a different instrument/cable. Consult technician for tube inspection/replacement. |
| Te nui rawa o te haruru, te ngunguru rānei | Ground loop, faulty power supply, proximity to interference, worn tubes. | Ensure proper grounding. Try a different power outlet. Move away from other electronic devices. Consult technician for tube or internal component issues. |
| Scratchy knobs/pots | Dust or wear in potentiometers. | This can sometimes be resolved with specialized contact cleaner, but often indicates wear. If persistent, professional servicing may be required. |
| Overdrive gain jumpy/unresponsive | Faulty potentiometer or circuit issue. | This indicates a component fault. Professional servicing is required. |
8. Whakatakotoranga
Detailed technical specifications for the Blackstar HT Club 40 Mark II ampkaikawe
Image: Dimensions of the Blackstar HT Club 40 Mark II amplifier. The image shows the amplifier from an angled perspective with arrows and numerical labels indicating its width (29.13"), height (24.8"), and depth (14.96").
| Āhuahira | Whakatakotoranga |
|---|---|
| Tau tauira | 056309 |
| Wat Putangatage | 40 Watts (ka taea te whakawhiti ki te 4 Watts) |
| Kaikōrero | 1x12 inihi |
| Nga hongere | 2 (Horoi, Puku Nui) |
| Mana whakahaere | Volume, Bass, Treble (Clean); Gain, Volume, Bass, Middle, Treble, ISF (Overdrive); Reverb Level, Master Volume |
| Ngā Pānga | Digital Reverb, Effects Loop |
| Hononga | Guitar Input, Speaker Outputs (1x16 Ohm, 1x8 Ohm, 2x16 Ohm), Emulated Output, Footswitch, USB Audio |
| Rahi Hua (L x W x H) | 14.96 x 29.13 x 24.8 inihi |
| Taumaha Tūemi | 62.5 pauna |
| Pūrere Hototahi | Kitara |
| Rauemi | Lead (Note: This refers to internal components, not external casing) |
| Kaihanga | Whero Pango |
| Te Ra Tuatahi Wātea | Noema 1, 2017 |
9. Pūtāhui me te Tautoko
Blackstar products are manufactured to the highest standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Blackstar Ampwhakarangatira webpae.
For technical support, service inquiries, or to locate an authorized service center, please visit the Blackstar Amplification official website or contact their customer support directly. Always provide your product model number (056309) and serial number when seeking support.
Whero Pango Amplification Official Webpae: www.blackstaramps.com
