ELRO AS80PR Motion Detector User Manual

1. Kupu Whakataki

The ELRO AS80PR is a wireless motion detector designed to integrate seamlessly with the ELRO AS8000 Smart Home Alarm System. This device utilizes passive infrared (PIR) technology to detect movement within its detection zone, providing an essential layer of security for your home or office. It communicates wirelessly with the AS8000 control panel using a stable 868MHz frequency, ensuring reliable performance.

2. Nga korero haumaru

• Me ata panui nga tohutohu katoa i mua i te whakaurunga me te whakamahi.
• Kaua e tukuna te taputapu ki te ra tika, te makuku nui, te wera nui ranei.
• Keep the device away from heat sources such as radiators or heating vents.
• Use only the specified battery type (CR123A). Incorrect battery usage may cause damage or fire.
• Kaua e ngana ki te whakatuwhera, ki te whakatika ranei i te taputapu. Tukuna atu nga ratonga katoa ki nga kaimahi whai tohu.

3. Ihirangi mokete

Tena koa tirohia kei reira nga taonga katoa:

• ELRO AS80PR Motion Detector
• CR123A Battery (pre-installed or separate)
• Nga Tiu Whakapiri me nga Mono Taiepa
• Pukapuka Kaiwhakamahi (tenei tuhinga)

4. Hua Neke Atuview

The ELRO AS80PR Motion Detector features a compact design with a PIR sensor lens at the front. The device is designed for discreet placement while providing effective motion detection.

Whakaahua 1: Mua view of the ELRO AS80PR Motion Detector. This image displays the compact, white casing of the device with the passive infrared (PIR) sensor lens visible at the bottom front, designed to detect movement.

5. Hototahi Pūnaha

The AS80PR Motion Detector is an integral part of the ELRO AS8000 Smart Home Alarm System. It works in conjunction with the main control panel and other accessories to create a comprehensive security solution.

Whakaahua 2: Ka mutuview of the ELRO AS8000 Smart Home Alarm System components. This image illustrates various accessories including the AS80PR motion detector, indoor camera, keypad, outdoor siren, door/window sensor, remote control, and smart plug, all connected to the central AS8000 hub and controllable via a smartphone app.

6. Tāuta me te Tatūnga

6.1. Tāuta Pūhiko

1. Open the battery compartment cover on the back of the motion detector.
2. Insert the supplied CR123A battery, ensuring correct polarity (+/-).
3. Katia kia mau te uhi o te wahanga pākahiko.

6.2. Pairing with AS8000 Hub

Refer to your ELRO AS8000 Smart Home Alarm System manual for detailed instructions on adding new wireless accessories. Generally, the process involves:

1. Put your AS8000 control panel into pairing mode.
2. Activate the AS80PR motion detector (e.g., by pressing a pairing button or triggering motion).
3. Confirm successful pairing on the AS8000 control panel or via the ELRO app.

6.3. Tauwāhi Maunga

Choose a mounting location that provides optimal detection coverage and avoids false alarms:

• Mount the detector in a corner or on a flat wall at a height of approximately 2.0 to 2.4 meters (6.5 to 8 feet).
• Ensure the detection area covers the desired entry points or high-traffic zones.
• Avoid aiming the detector directly at windows, heat sources (e.g., radiators, air conditioning vents), or areas with significant air currents, as these can cause false alarms.
• The detection range is up to 10 meters with a 110-degree angle in open space.

Whakaahua 3: Diagram showing the dimensions and detection capabilities of the ELRO AS80PR Motion Detector. The image indicates a device height of 85mm and width of 62mm, a wireless range of 868MHz / 100m (open space), and a detection range of 10m x 110 degrees, powered by a 3V DC CR123A battery.

6.4. Whakaeke i te Pūrere

1. Once the optimal location is determined, mark the screw holes on the wall.
2. Keria he kōhao pairati mēnā e tika ana, ka whakauru i ngā puru pakitara.
3. Secure the mounting bracket (if separate) or the detector itself to the wall using the provided screws.
4. Ensure the detector is firmly attached and stable.

7. Operating the Motion Detector

Once installed and paired, the AS80PR Motion Detector operates automatically as part of your AS8000 Smart Home Alarm System. When the alarm system is armed, the detector will monitor its assigned area for movement. Upon detecting motion, it will transmit a signal to the AS8000 control panel, triggering the alarm according to your system's settings.

• Awhe Rapunga: Up to 10 meters with a 110-degree angle.
• Whakawhitiwhiti Ahokore: 868MHz frequency for reliable signal transmission up to 100 meters in open space.
• Maama Tohu: A small LED indicator may flash briefly upon motion detection or during pairing to confirm activity.

8. Tiaki

8.1. Whakakapinga Pūhiko

The AS80PR Motion Detector is powered by a CR123A battery. When the battery level is low, your AS8000 system will typically notify you. To replace the battery:

1. Disarm your alarm system before proceeding.
2. Whakatuwheratia te uhi o te wahanga pākahiko.
3. Tangohia te papahiko tawhito ka maka atu kia rite ki nga tikanga o te rohe.
4. Insert a new CR123A battery, observing correct polarity.
5. Katia te uhi o te wahanga pākahiko.
6. Test the detector to ensure it is functioning correctly and communicating with the AS8000 hub.

8.2. Te horoi

Clean the exterior of the motion detector periodically with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device or interfere with sensor performance.

9. Te Raru

• Detector not responding: Check the battery. Ensure it is correctly inserted and has sufficient charge. Re-pair the detector with the AS8000 hub if necessary.
• Pūoho teka: Review the mounting location. Ensure there are no heat sources, direct sunlight, or strong air currents in the detection zone. Adjust the detector's angle if possible.
• Poor detection: Verify that the sensor lens is clean and unobstructed. Ensure the detector is mounted at the recommended height and covers the intended area.
• Nga take korero: Ensure the detector is within the wireless range of the AS8000 hub (up to 100m in open space, less indoors due to obstacles). Check for potential interference from other wireless devices.

10. Whakatakotoranga

• Tauira: AS80PR
• Waitohu: ELRO
• Puna Hiko: 1x CR123A Battery (3V DC)
• Aurere Ahokore: 868MHz
• Awhe Ahokore: Tae atu ki te 100 mita (waahi tuwhera)
• Awhe Rapunga: Tae atu ki te 10 mita
• Koki Rapunga: 110 nga nekehanga
• Ahu (L x W x H): Tata ki te 6.5 x 5 x 8.5 cm
• Taumaha: Tata ki te 120 karamu

11. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation provided with your ELRO AS8000 Smart Home Alarm System or visit the official ELRO webpae. Puritia to tohu hoko mo nga kereme whakamana.