1. Nga Korero Haumaru Nui
WHAKATŪPATO: Risk of electric shock. Disconnect power at the main circuit breaker panel or main fuse box before installation or servicing. Failure to do so may result in serious injury or property damage.
Always ensure wiring is safely disconnected from power before beginning any work on the fixture. Use a non-contact voltage tester hei whakaū kua weto te hiko.
Consult a qualified electrician if you have any doubts or questions regarding the installation process or if your home's wiring does not match standard black and white wires.
Please check your local laws and electrical codes before installing this product.
2. Hua Neke Atuview
The Kichler Shailene 18-inch 3-Light Square Semi-Flush Ceiling Light (Model 43693NI) is designed to provide ambient lighting. It features a brushed nickel finish with a satin etched white diffuser and a white microfiber shade.
Figure 2.1: Kichler Shailene Semi-Flush Ceiling Light, Model 43693NI.
Figure 2.2: Product dimensions showing 18 inches width and 11 inches height.
3. He aha kei roto i te Pouaka
Carefully unpack all components and check against the list below. Ensure all parts are present before discarding packaging materials.
- (1) Taura Whakapiki
- Nga Tiu Whakanoho Tae
- Whakaeke Tiu
- Kaihoroi maukati
- Ngā Poro Maukati
- Nati Nati
- Kuti
- Whakautu
- Paipa Pītiti
- (1) Shade(s)
- Bulb(s) (kaore i whakauruhia)
4. Nga Utauta e Hiahia ana (Kaore i whakauruhia)
The following tools are recommended for safe and efficient installation:
- Te arawhata
- Phillips Head Tiwiri
- Tiwhikete Upoko Upoko
- Wire Strippers/Pliers
- Kore-Whakapā Voltage Kaiwhakamatautau
- Safety Glasses (recommended)
5. Tohutohu Tāuta
Follow these steps carefully to install your Kichler Shailene semi-flush ceiling light. It is recommended to have an additional person for assistance during installation, especially when lifting the fixture.
5.1. Whakarite mo te Whakauru
- Momotu Mana: Locate the main circuit breaker panel or fuse box and turn off the power to the circuit where you will be installing the light fixture.
- Verify Power is Off: Whakamahia he vol whakapā-koretage tester to ensure that the wiring at the ceiling junction box is safely disconnected from power.
- Tango i nga taputapu o naianei: Carefully remove any existing light fixture from the ceiling. Disconnect all wires and remove the old mounting bracket.
- Review Tohutohu: Keep the printed instructions provided with your fixture close by for specific details, as each fixture may have unique instructions.
5.2. Mount the Fixture
- Āpiti Taiapa Whakapuru: Secure the new mounting bracket to the junction box on your ceiling using the provided mounting screws. Ensure it is firmly attached.
- Whakapaia nga Waea: If necessary, cut excess wiring from the fixture, leaving a minimum of 6 inches from the top of the canopy for connections. Strip approximately 3/4 inch of insulation from the ends of the wires.
- Honoa Waea Papa: Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green) using a wire nut. Secure the ground wire to the mounting bracket's ground screw.
- Connect Supply Wires:
- Honoa te waea mā mai i te hononga ki te waea mā (kore hononga) mai i te pouaka hononga mā te whakamahi i te nati waea.
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Ngā Waea Tuck: Carefully tuck all connected wires into the junction box, ensuring they are not pinched.
- Pounamu Haumaru: Raise the fixture's canopy to the ceiling and secure it to the mounting bracket using the provided lock up knobs or finial.
5.3. Huihuinga Whakamutunga
- Tāuta Topuku: Carefully screw the appropriate light bulbs (E26 Medium base, up to 75W equivalent) into the sockets.
- Āpiti Taumarumaru: Secure the satin etched white diffuser and white microfiber shade to the fixture according to the specific instructions for your model.
5.4. Whakaora Mana
- Whakakā Hiko: Return to the main circuit breaker panel or fuse box and restore power to the circuit.
- Whakaritenga Whakamatau: Turn on the wall switch to test your new Kichler Shailene semi-flush ceiling light.
5.5. Aratohu Ataata Tāutanga
For a visual guide on installing Kichler semi-flush and flush mount fixtures, please refer to the video below. Note that specific steps may vary slightly depending on your fixture model.
Video: How to Install Kichler Semi Flush and Flush Mounts at Home. This video provides general installation guidelines; always refer to your specific product's printed instructions.
6. Mahi
The Kichler Shailene semi-flush ceiling light operates via a standard wall switch. Ensure the switch is in the "ON" position for the light to function. If using a dimmer switch, ensure it is compatible with the type of bulbs installed.
7. Tiaki
Regular cleaning will help maintain the appearance and performance of your fixture.
- I mua i te horoi: Always ensure the electric current is turned off at the circuit breaker before cleaning any part of the fixture.
- Wae Whakarewa: Clean metal components with a soft cloth moistened with a mild liquid soap solution. Wipe clean and buff with a very soft dry cloth to prevent water spots or streaks.
- Shade and Diffuser: For the satin etched white diffuser and white microfiber shade, use a dry, soft cloth to gently wipe away dust. For more stubborn marks, a slightly damp cloth with plain water may be used, followed by immediate drying. Avoid abrasive cleaners or harsh chemicals.
- Whakakapi Purama: When replacing bulbs, ensure the power is off. Allow bulbs to cool completely before handling. Use E26 Medium base bulbs, up to 75W equivalent.
8. Te Raru
If your Kichler Shailene light fixture is not functioning correctly, refer to the following common issues and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. | Kaore he mana ki te huringa. | Check the circuit breaker and wall switch. Ensure power is restored. |
| Kaore e marama te rama. | Nga hononga waea kua wetekina, he he ranei. | Turn off power at the breaker. Recheck all wire connections (black to black, white to white, ground to ground). Ensure wire nuts are secure. |
| Kaore e marama te rama. | Pupura hapa. | Replace the bulb(s) with new, working ones of the correct type and wattage. |
| Ka whiti marama. | Ko te topuku, te waea waea ranei. | Ensure bulbs are screwed in tightly. Check wire connections at the junction box (with power off). |
| He pouri te marama. | wat pūrama hētage momo ranei. | Ensure bulbs meet the specified wattage (up to 75W equivalent) and are fully functional. |
If these steps do not resolve the issue, contact a qualified electrician or Kichler customer support for further assistance.
9. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | Kichler |
| Ingoa Tauira | Shailene |
| Tau tauira | 43693NI |
| Hunga Hua | 18"L x 18"W x 11"H |
| Te maha o nga puna marama | 3 |
| Putunga Pupura | E26 Waenga |
| Max Wattage (ia pūrama) | 75 watts equivalent |
| Voltage | 120 Volts |
| Rauemi Whakauru | Korotahi Steel |
| Rauemi whakamarumaru | Glass, Microfiber |
| Momo Whakaoti | Nika paraihe |
| Tae Taumaru | Mā |
| Momo Tāuta | Maunga Waarua |
| Mahinga o roto/waho | Roo-roto |
| Taumaha Tūemi | 6.8 Pauna |
10. Pūtāhui me te Tautoko
This Kichler Shailene fixture comes with a 1-tau iti pūtāhui. Ka kapi tenei raihana i nga hapa o nga rawa me nga mahi i raro i te whakamahinga me te ratonga.
For warranty claims, technical support, or additional information, please contact Kichler customer service. Refer to the official Kichler webte pae, to tuhinga hoko ranei mo nga korero whakapiri o naianei.
Kichler Webpae: www.kichler.com
