1. Kupu Whakataki
The ZIOCOM 30 Pin Bluetooth Adapter is designed to upgrade traditional 30-pin dock speakers, such as those found in older Bose SoundDock, iPod, and iPhone speaker systems, with Bluetooth wireless audio streaming capabilities. This adapter allows you to connect modern Bluetooth-enabled devices, like smartphones and tablets, to your existing 30-pin dock speaker, extending its usability and providing a convenient wireless listening experience.
2. Hua Neke Atuview
The ZIOCOM 30 Pin Bluetooth Adapter is a compact device that plugs directly into the 30-pin connector of your compatible dock speaker. It features a sleek black design and integrates seamlessly with most speaker docks.
Āhuatanga matua:
- Transforms 30-pin dock speakers into Bluetooth-enabled audio systems.
- Supports A2DPV1.2 for stereo Bluetooth audio.
- Plug and play operation.
- Working distance of up to 10 meters (30 feet).
- Powered directly by the 30-pin dock speaker.
3. Tohutohu Tatūnga
Follow these steps to set up your ZIOCOM 30 Pin Bluetooth Adapter:
- Kōkuhu te Pūurutau: Carefully plug the ZIOCOM 30 Pin Bluetooth Adapter into the 30-pin connector on your dock speaker. Ensure it is firmly seated.
- Te Mana Whakaoho: Turn on your 30-pin dock speaker. The adapter will draw power directly from the speaker.
- Whakahohe Nihokikorangi: On your audio source device (e.g., smartphone, tablet), enable Bluetooth.
- Takirua: Rapua available Bluetooth devices. The adapter should appear as "I-Link" in your device list. Select it to initiate pairing. If prompted for a password, enter "0000".
- Whakaū Hononga: Once paired, your device will indicate a successful connection. You can now play audio wirelessly through your dock speaker.
Tuhipoka: If the 30-pin receiver powers up but produces no music, ensure your speaker has an AUX IN port. You may need to connect an audio cable from the 30-pin receiver (if it has an audio output) to the speaker's AUX IN. However, this adapter typically functions directly through the 30-pin connection for audio transmission.
4. Nga Tohutohu Whakahaere
Once paired, the ZIOCOM 30 Pin Bluetooth Adapter will generally reconnect automatically to the last paired device when both the adapter (via the speaker) and the device are powered on and within range.
- Hononga Aunoa: Ensure Bluetooth is active on your device. If the adapter and your device were previously paired, they should reconnect automatically.
- Manual Reconnection: If automatic reconnection fails, go to your device's Bluetooth settings and select "I-Link" from the list of paired devices.
- Awhe: Maintain your audio source device within 10 meters (30 feet) of the adapter for optimal performance. Obstacles and interference may reduce this range.
5. Hototahi
The ZIOCOM 30 Pin Bluetooth Adapter is designed for specific 30-pin dock speakers. Please review the compatibility lists below before use.
Compatible Speakers (Exampiti):
- Bose SoundDock 10, SoundDock I, SoundDock II, SoundDock Portable
- JBL I runga i te Stage 3, On Stage 4, On Time 200P, On Time Micro, Radial Micro
- SONY AIR-SW10Ti, ICF-C1iPMK2, ICF-C05iP, ICF-7iP, ICF-CS10iP, RDP-M15iP, RDP-M5iP, RDP-V20iP
- PHILIPS DCD3020, DCD8000/93, DCM713, DCM3060, DS1100, DCM2055
- YAMAHA PDX-11, PDX-13, TSX-70, TSX-130
- iHome iP1 Studio, iHome iP49 Studio
- SANSUI MC-7000SD / DOSS DS-375 / LG FA-168 / MOGIC r1100 / Hi-Fi System UE-A4
- Bijela hl2281, l2282
Kaore i Hototahi ki:
- Bose SoundDock digital music system (specific models may vary, refer to your speaker's manual)
- Denon S-32
- Sony MHC-EC609ip
- Sharp GX-M10
- Any car or motorcycle audio systems.
6. Te Raru
- Karekau he Hiko/Karekau he Maama Tohu: Ensure the adapter is fully inserted into the 30-pin dock and the dock speaker is powered on. The adapter draws power from the speaker.
- Cannot Pair/Find "I-Link":
- Confirm the adapter is powered (indicator light on).
- Ensure Bluetooth is enabled on your audio source device.
- Move your device closer to the adapter.
- Turn off and on your device's Bluetooth, then rescan.
- Takirua engari Kore he Oro:
- Check the volume levels on both your audio source device and the dock speaker.
- Ensure the correct audio output is selected on your device.
- Verify that your speaker model is listed as compatible.
- If your speaker requires an AUX IN connection for the adapter, ensure it is properly connected (refer to Image 3.3).
- Hononga Waarua/Kounga Ororongo Kino:
- Reduce the distance between your device and the adapter.
- Remove any obstructions between the devices.
- Avoid strong electromagnetic interference from other electronic devices.
- Reconnection Issues (e.g., after connecting to another Bluetooth device): If your device struggles to reconnect, try going to your device's Bluetooth settings, selecting "I-Link", and choosing "Forget This Device" or "Unpair". Then, repeat the pairing process from Step 3 of the Setup Instructions.
- Password Prompt: If a password is requested during pairing, enter "0000".
7. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Hunga Hua | 1.97 x 1.46 x 0.43 inihi |
| Taumaha Tūemi | 0.423 hekere |
| Tau tauira | ZM0030pin |
| Hangarau Hononga | Nihokikorangi |
| Pūrere Hototahi | Kaikōrero, Waea atamai |
| Momo Tuhono | 30pin |
| Aratau Putanga Ororongo | Tirooro |
| Whirihoranga Hongere oro a tawhio noa | 2.0 |
| Āhuahira Motuhake | For 30 pin dock speaker only |
8. Pūtāhui me te Tautoko
ZIOCOM is committed to providing quality products and customer satisfaction. If you encounter any issues or have questions regarding your ZIOCOM 30 Pin Bluetooth Adapter, please contact our professional after-sales support team.
For assistance, please refer to the contact information provided with your product packaging or visit the official ZIOCOM webpae mo nga whiringa tautoko.
