Pukapuka Tohutohu mō te Pae Hauhanga Taiao 60-Inihi a Adcraft BDGR-60/NG Black Diamond

1. Kupu Whakataki

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Adcraft BDGR-60/NG Black Diamond 60-Inch Natural Gas Range. This commercial-grade appliance is designed for professional kitchen environments, featuring robust construction and high-performance components. Please read this manual thoroughly before using the appliance and retain it for future reference.

He ki tonu view of the Adcraft BDGR-60/NG Black Diamond 60-Inch Natural Gas Range, showcasing its stainless steel construction, ten top burners with cast iron grates, and two oven compartments below.

2. Nga Korero Haumaru Nui

For your safety and to reduce the risk of fire, explosion, electric shock, or injury, please observe all safety warnings and instructions. This appliance must be installed by a qualified professional in accordance with all local codes and regulations.

• Tuku Hau: Ensure the gas supply pressure is correct for natural gas. All gas connections must be leak-tested after installation.
• Whakahau: Adequate ventilation is crucial. This appliance must be installed under an appropriate commercial ventilation hood.
• Whakaoti: Maintain proper clearances from combustible materials as specified by local codes and the appliance's rating plate.
• Tirohanga: Kaua rawa e waiho noa te taputapu i te wa e mahi ana.
• Rauemi mura: Kaua e penapena, e whakamahi ranei i te penehīni, i etahi atu kohu me nga wai e mura ana ki te taha tata o tenei taputapu ranei.
• Mata wera: Surfaces become hot during use. Use caution and appropriate protective gear when operating.
• Tiaki: Only qualified service personnel should perform maintenance or repairs.

3. He aha kei roto i te Pouaka

Upon unpacking, verify that the following item is included:

• Adcraft BDGR-60/NG Black Diamond 60-Inch Natural Gas Range

Inspect the appliance for any shipping damage. Report any damage immediately to the carrier and your dealer.

4. Tatūnga me te Tāuta

Installation of this commercial gas range must be performed by a licensed and qualified installer in accordance with all applicable national and local codes. The appliance is certified by cETLus and ETL-Sanitation standards.

4.1. Tauwāhi

Place the range on a level, non-combustible surface. Ensure adequate clearance around the unit for proper ventilation and maintenance access.

4.2. Whakataumata

The range is equipped with 6-inch adjustable legs. Use a level to ensure the unit is perfectly level for optimal performance and safety.

4.3. Hononga hau

Connect the range to a natural gas supply using a 3/4" NPT connection. All gas connections must be sealed and tested for leaks using a non-corrosive leak detection solution.

4.4. Whakahau

Install the range under a properly sized and installed commercial ventilation hood system to ensure adequate removal of cooking fumes and heat.

5. Nga Tohutohu Whakahaere

5.1. Top Burners

The range features ten 12" x 12" 30,000 BTU top burners, each with individual pilot lights and control knobs for instant lighting and precise heat adjustment.

1. Ensure the individual pilot light for the desired burner is lit.
2. Turn the corresponding control knob to the desired flame setting (Low to High).
3. To turn off, rotate the control knob to the 'OFF' position.

5.2. Standard Ovens

The range includes two standard ovens, each measuring 26.75"W x 26"D x 14"H, with a total BTU output of 30,000 BTU/hr. Each oven has a porcelain liner and two adjustable racks.

1. Open the oven door and ensure the oven is clear of any obstructions.
2. Adjust the oven racks to the desired height.
3. Turn the oven thermostat knob to the desired temperature, ranging from 200°F to 550°F. The oven is equipped with a flame failure safety device for added safety.
4. Tukua te oumu kia whakamahana ki te pāmahana kua whakaritea i mua i te whakatakoto i te kai ki roto.
5. To turn off, rotate the thermostat knob to the 'OFF' position.

6. Te horoi me te tiaki

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Adcraft range. Always allow the appliance to cool completely before cleaning.

6.1. Horoi o waho

The range is constructed of stainless steel. Clean exterior surfaces with a mild detergent and warm water. Wipe dry with a soft cloth to prevent water spots. Avoid abrasive cleaners or scouring pads that can scratch the stainless steel finish.

6.2. Top Grates and Crumb Tray

The 12" x 12" cast iron top grates are removable for easy cleaning. The range also features a removable crumb tray. Clean these components regularly to prevent grease buildup and maintain hygiene.

• Remove grates and crumb tray.
• Wash with warm, soapy water. For stubborn grease, use a degreaser.
• Horoia rawatia ka maroke rawa i mua i te whakakapi.

6.3. Oven Interior

The oven interior features a porcelain liner, which is easier to clean than bare steel. Clean spills and food residue promptly to prevent baking on.

• Tangohia nga whata oumu.
• Horoia te roto ki te panuiamp kakahu me te horoi ngawari.
• For baked-on spills, use a non-abrasive oven cleaner suitable for porcelain surfaces, following the product instructions.
• Horoia rawatia ka maroke.

7. Te Raru

I mua i te whakapā atu ki te ratonga, review nga take me nga otinga noa e whai ake nei:

Mena ka mau tonu ngā raruraru i muri i te whakamātau i ēnei otinga, whakapā atu ki tētahi tohunga ratonga whai tohu.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Adcraft customer service directly. Keep your purchase receipt and model number (BDGR-60/NG) readily available when seeking support.

Karekau he ataata hua whai mana mai i te kaihoko i waatea hei whakauru ki tenei pukapuka.