Pukapuka Kaiwhakamahi mō te Pūrere Waea Analog Grandstream HT818

1. Kupu Whakataki

The Grandstream HT818 is a powerful 8-port FXS VoIP Gateway designed to convert analog telephone and fax lines into a Voice over IP (VoIP) network. It features an integrated Gigabit NAT router, offering robust connectivity and high-quality voice communication. This device is ideal for users seeking to integrate traditional analog devices into modern IP-based communication systems, providing strong encryption, automated provisioning, and excellent network performance.

2. Nga korero haumaru

Please read and follow these safety instructions carefully to prevent damage to the device and ensure user safety:

• Whakamahia te urutau hiko anake me te taputapu.
• Kaua e tukuna te taputapu ki te wai, ki te makuku ranei.
• A ape i te whakanoho i te taputapu ki te taha o nga puna wera, ki te ra tika ranei.
• Me whakarite kia tika te hau kia kore e wera rawa.
• Kaua e ngana ki te whakatuwhera, ki te whakatika ranei i te taputapu. Tukuna atu nga ratonga katoa ki nga kaimahi whai tohu.

3. Ihirangi mokete

Manatokohia kei roto i to kete nga mea e whai ake nei:

• Grandstream HT818 8-Port FXS VoIP Gateway Unit
• Whāurutau Hiko Ao
• Tauira Itarangi
• Aratohu Tāuta Tere

4. Tino Tinoview

The Grandstream HT818 features a compact design with clearly labeled ports for easy setup. Below is an image of the device, highlighting its key components.

Whakaahua 1: Grandstream HT818 Analog Telephone Adapter. This image shows the device from a slightly angled perspective, revealing its compact white casing and the various ports on the rear panel, including the FXS ports, LAN/WAN Ethernet ports, and power input.

Tohu Paewhiri Mua:

• Arahina hiko: Ka tohu i te mana mana.
• LED Ipurangi: Indicates WAN port status.
• Arahina LAN: E tohu ana i te mana tauranga LAN.
• FXS Port LEDs (1-8): Indicate the status of each analog phone port.

Tauranga Paewhiri Whakamuri:

• FXS Ports (1-8): RJ11 ports for connecting analog telephones or fax machines.
• WAN Tauranga: RJ45 Ethernet port for connecting to your internet router or modem.
• Tauranga LAN: RJ45 Ethernet port for connecting to a local computer or network switch.
• Whakauru Hiko: Hei hono i te urutau hiko kua whakaratohia.
• Patene Tautuhi Anō: I whakamahia hei whakaora i nga tautuhinga taunoa wheketere.

5. Tohutohu Tatūnga

Whāia ēnei mahi hei whakarite i tō Grandstream HT818:

1. Hono Hono: Plug the provided power adapter into the HT818's power input port and then into a power outlet. The Power LED should illuminate.
2. Hononga Whatunga:
   • Connect one end of an Ethernet cable to the HT818's WAN port and the other end to an available LAN port on your internet router or modem. The Internet LED should light up.
   • Optionally, connect a computer or network switch to the HT818's LAN port using another Ethernet cable. The LAN LED should light up.
3. Honoa ngā Pūrere Analog: Plug your analog telephones or fax machines into the FXS ports (1-8) on the HT818 using standard RJ11 phone cables. The corresponding FXS port LEDs will illuminate when a device is connected and registered.
4. Whirihoranga Tuatahi (Web Interface Access):
   • Hei uru atu ki te web configuration interface, you will need the HT818's IP address. You can find this by connecting an analog phone to FXS port 1, dialing ***, then dialing 02. The IP address will be announced.
   • Tuwhera a web browser on a computer connected to the same network as the HT818 (either via the LAN port or your main router).
   • Enter the HT818's IP address into the browser's address bar and press Enter.
   • Log in using the default username (admin) and password (admin). You should change the default password for security.
   • Configure your SIP account details provided by your VoIP service provider within the web atanga.

6. Nga Tohutohu Whakahaere

Waeatanga:

1. Pick up the handset of the analog phone connected to an FXS port. You should hear a dial tone.
2. Waea te nama waea e hiahiatia ana.
3. Tatari kia hono te waea.

Whiwhi Waea:

• When an incoming call arrives, the connected analog phone will ring.
• Tangohia te ringaringa ki te whakautu i te waea.

Waeatuhi:

The HT818 supports T.38 Fax over IP, which is crucial for reliable fax transmissions over a VoIP network.

• Ensure your fax machine is connected to an FXS port.
• Verify that T.38 support is enabled and correctly configured in the HT818's web interface, as well as on your VoIP service provider's side.
• Follow your fax machine's instructions for sending and receiving faxes.

7. Tiaki

Whakapai ake i nga Firmware:

Regularly check for and install firmware updates from the Grandstream website to ensure optimal performance, security, and access to new features. Firmware upgrades are typically performed via the device's web atanga.

Backup and Restore Configuration:

It is recommended to regularly back up your device's configuration settings. This allows for quick restoration in case of accidental changes or device replacement. The backup/restore function is available in the web atanga.

Tautuhi wheketere:

A factory reset will revert all settings to their default values. This can be useful for troubleshooting or preparing the device for redeployment. To perform a factory reset, press and hold the reset button on the rear panel for approximately 7-10 seconds until the LEDs flash.

8. Te Raru

Mena ka pāngia koe e ngā raruraru me tō HT818, tirohia ngā raruraru me ngā otinga e whai ake nei:

• Kore oro Waea:
  • Ensure the power adapter is securely connected and the Power LED is on.
  • Check that the Ethernet cable is properly connected to the WAN port and your router, and the Internet LED is active.
  • Verify that the analog phone is correctly plugged into an FXS port and its corresponding LED is active.
  • Confirm that your SIP account is registered successfully in the web atanga.
• Kāore e taea te waea atu, te whiwhi waea atu rānei:
  • Tirohia te mana rehitatanga SIP i te web interface. If not registered, verify SIP server settings, username, and password.
  • Ensure your internet connection is active and stable.
  • Check firewall settings on your router; SIP ALG should generally be disabled.
  • Confirm that the correct dial plan is configured for outgoing calls.
• Nga take Tuku Waeatuhi:
  • Ensure T.38 Fax over IP is enabled in the HT818's web configuration and supported by your VoIP service provider.
  • Try reducing the fax machine's transmission speed.
  • Check for any network congestion or packet loss that might affect fax quality.
• Raruraru Hononga Whatunga:
  • Me manatoko kei te hono pono ngā taura Ethernet katoa.
  • Check the status of the LAN and WAN LEDs.
  • Restart the HT818, your router, and your modem.

9. Whakatakotoranga

Below are the technical specifications for the Grandstream HT818:

10. Pūtāhui me te Tautoko

Ko ngā hua Grandstream he mea hipokina e te pūtāhui iti. Mō ngā tikanga me ngā herenga pūtāhui motuhake, tirohia te kāri pūtāhui kei roto i tō hua, tirohia rānei te paetukutuku mana o Grandstream. website. For technical support, firmware updates, and additional resources, please visit the Grandstream support portal or contact your reseller.