1. Kupu Whakataki
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your LiftMaster 892LT 2-Button Remote Control Transmitter. The 892LT remote is designed to operate up to two garage door openers or gate operators, offering a convenient way to access your property. It is compatible with LiftMaster Security+ 2.0, 315 MHz, and 390 MHz systems, and replaces older models such as 972LM, 372LM, and 62LM.
Please read this manual thoroughly before attempting to program or operate the remote control to ensure proper function and safety.
Whakaahua 1.1: Mua view of the LiftMaster 892LT 2-Button Remote Control Transmitter.
2. Nga korero haumaru
To reduce the risk of severe injury or death, observe the following safety precautions:
- Do not enable the garage door opener if the door is not balanced or if springs are broken.
- Puritia ngā mana mamao kia kore e taea e ngā tamariki te toro atu.
- Operate the garage door opener only when the door is in full view, free of obstructions, and the opener is properly adjusted.
- Do not allow children to play with the remote control or the garage door opener.
- This remote control is not intended for use with any garage door opener manufactured before 1993 that does not have a safety reversal system.
3. Ihirangi mokete
Manatokona kei roto katoa nga mea kei roto i to kete:
- LiftMaster 892LT 2-Button Remote Control Transmitter
- Pūhiko Ritiumu CR2 (kua tāutahia i mua)
- Topenga Visor
4. Tatūnga me te Papatonotanga
The 892LT remote control can be programmed to operate up to two different garage door openers or gate operators. Follow these steps to program your remote:
4.1. Locate the Learn Button on Your Opener
The location and color of the Learn button vary by garage door opener model. Refer to your garage door opener's manual if you cannot locate it. Common locations include the back or side panel of the motor unit.
Image 4.1: The 892LT remote supports Security+ 2.0 technology for enhanced security.
4.2. Ngā Hipanga Hōtaka
- Press and Release the Learn Button: On your garage door opener, press and immediately release the Learn button. The Learn LED on the opener will glow steadily for 30 seconds.
- Press and Hold the Remote Button: Within 30 seconds, press and hold the button on your 892LT remote control that you wish to program.
- Release the Remote Button: Release the remote button when the garage door opener lights flash or two clicks are heard. This indicates that the remote has been successfully programmed.
- Whakamātauria te Mamao: Press the programmed button on your remote control. The garage door opener should activate.
If you are programming a second button for another opener, repeat the steps above, selecting a different button on the 892LT remote and the Learn button on the second opener.
Image 4.2: The 892LT features a multi-use design, allowing control of up to two devices.
5. Nga Tohutohu Whakahaere
Once programmed, operating your LiftMaster 892LT remote control is straightforward:
- To Open or Close the Door: Press the programmed button on your remote control. The garage door or gate will begin to move.
- To Stop the Door: Press the programmed button again while the door is in motion.
- To Reverse the Door: If the door is stopped mid-travel, pressing the button again will reverse its direction.
Ensure you have a clear line of sight to the garage door or gate when operating the remote to prevent accidents.
6. Tiaki
6.1. Whakakapinga Pūhiko
The 892LT remote uses one CR2 lithium battery. When the battery is low, the remote's range may decrease, or the LED indicator may not light up consistently.
- Whakatuwheratia te Mana Mamao Casing: Use a small coin or screwdriver to gently pry open the remote control casing.
- Tango Pūhiko Tawhito: Tangohia marietia te pākahiko tawhito CR2.
- Kōkuhu Pūhiko Hōu: Whakauruhia he pākahiko CR2 hou me te taha pai (+) e anga whakarunga ana.
- Katia Casing: Pāwhiria te mana mamao casinkia mau te hono tahi.
6.2. Te horoi
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the remote's electronics.
7. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te mamao e whakahohe i te kaiwhakatuwhera. | Remote is not programmed or battery is dead. | Re-program the remote (Section 4.2). Replace the battery (Section 6.1). |
| Remote has reduced range. | He iti te pākahiko, he pokanoa rānei. | Replace the battery (Section 6.1). Check for sources of interference near the opener. |
| Ka kanapa ngā rama o te whakatuwheratanga engari kāore te tatau e nekeneke. | Kua āraia, kua hē rānei te tūnga o ngā pūoko haumaru. | Check and clear any obstructions from the safety sensors. Align the sensors if necessary. |
8. Whakatakotoranga
- Tauira: 892LT
- Pātene: 2
- Hototahi: LiftMaster Security+ 2.0, 315 MHz, 390 MHz, 433 MHz
- Pūhiko: 1 x CR2 Lithium (included)
- Ahu: Tata ki te 5.12 x 2.72 x 1.14 inihi (13 x 6.9 x 2.9 cm)
- Taumaha: Tata ki te 2.08 hekere (0.06 kg)
- UPC: 734721923729
9. Pūtāhui me te Tautoko
Mō ngā mōhiohio e pā ana ki te pūtāhui me te tautoko hangarau, tirohia te tari mana o te kaihanga webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Puritia to riiki hoko hei tohu mo te hoko.
