Moxa EDS-208 8-Port Unmanaged Ethernet Switch

1. Kupu Whakataki

This manual provides instructions for the installation, operation, and maintenance of the Moxa EDS-208 8-Port Unmanaged Ethernet Switch. The EDS-208 is designed for industrial networking applications, offering reliable 10/100BaseT(X) Ethernet connectivity in a compact, unmanaged form factor.

2. Nga korero haumaru

• Me ata panui nga tohutohu katoa i mua i te whakahaere i te taputapu.
• Whakaritehia te voltage is within the specified range for the device. A power supply is not included and must be purchased separately.
• Kaua e tukuna te taputapu ki te makuku, ki te wera nui ranei.
• Ko nga kaimahi whai tohu anake me mahi i te whakaurunga me te tiaki.
• Momotuhia te hiko i mua i te horoinga, i te tiakitanga rānei i te pūrere.

3. Ihirangi mokete

Before installation, verify that the package contains the following items:

• Moxa EDS-208 Unmanaged Ethernet Switch
• Aratohu Tāutanga Tere (mēnā kei roto)
• Kāri Pūtāhui (mehemea kei roto)

If any of these items are missing or damaged, please contact your sales representative for assistance.

4. Hua Neke Atuview

Whakaahua 1: Moxa EDS-208 Unmanaged Ethernet Switch. This image displays the Moxa EDS-208 unmanaged Ethernet switch. The front panel features eight 10/100BaseT(X) RJ45 ports, numbered 1 through 8. Above the ports, the Moxa logo is visible, along with a 'P' indicator and a power LED. At the top, a green removable terminal block is present for power input. The device has a dark grey plastic housing with ribbed sides for heat dissipation.

4.1. Tahora Paepae Mua

• Power Input Terminal Block: Located at the top, a green removable terminal block for connecting the DC power supply.
• Power LED (P): Ka tohu i te mana mana o te taputapu.
• 10/100BaseT(X) Ports (1-8): Eight RJ45 ports for connecting Ethernet devices. Each port supports 10 Mbps or 100 Mbps operation.
• Hononga/Arahiko Mahi: Integrated into each RJ45 port, these LEDs indicate network link status and data activity.

5. Tatūnga

5.1. Whakapiki i te Whakawhiti

The EDS-208 supports DIN-rail mounting. To mount the switch:

1. Attach the DIN-rail mounting kit (if not pre-installed) to the rear of the switch.
2. Hook the top of the DIN-rail clip over the top edge of the DIN rail.
3. Press the switch firmly against the DIN rail until the clip snaps into place.

5.2. Te Mana Hononga

Important: A power supply is NOT included with the EDS-208 and must be purchased separately. Ensure the power supply meets the device's voltage me nga whakaritenga o naianei.

1. Me mohio kua weto te puna hiko.
2. Connect the positive and negative wires from your DC power supply to the corresponding terminals on the green removable terminal block at the top of the switch. Refer to the terminal block markings for correct polarity.
3. Insert the terminal block firmly into its receptacle on the switch.
4. Turn on the power source. The 'P' LED on the front panel should illuminate, indicating power is supplied.

5.3. Te Hono i ngā Pūrere Whatunga

Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to any of the eight RJ45 ports on the front panel of the EDS-208. The switch automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of the connected devices.

6. Te whakahaere i te Whakawhiti

6.1. Tohu LED

The EDS-208 features several LED indicators to provide status information:

• Power LED (P):
  • Kei runga: Kei te whiwhi te whakakā i te mana.
  • Weto: Ko te pana kaore i te whiwhi mana.
• Link/Activity LEDs (per RJ45 port):
  • Kei runga: Kua whakatūria he hononga whatunga tika.
  • E whiti ana: Kei te tukuna, kei te whiwhi rānei i ngā raraunga mā te tauranga.
  • Weto: Karekau he hononga whatunga i whakaritea.

6.2. Taumahinga Taketake

The EDS-208 is an unmanaged switch, meaning it operates automatically without requiring any configuration. It provides basic Ethernet switching functions, including:

• Store-and-Forward Switching: Ensures data integrity by checking for errors before forwarding frames.
• Whiriwhiri-Aunoa: Automatically determines the best speed and duplex mode for each connected device.
• MDI Aunoa/MDI-X: Automatically detects and adjusts for straight-through or crossover Ethernet cables.
• Broadcast Storm Protection: Helps prevent network congestion caused by excessive broadcast traffic.

7. Tiaki

7.1. Te horoi

To clean the switch:

1. Disconnect power to the device.
2. Whakamahia he kakahu ngohengohe, maroke hei muru i te taha waho o te pana.
3. Kaua e whakamahia ngā horoi wai, ngā horoi āerosol rānei, nā te mea ka kino pea te taputapu.

7.2. Nga Whakaaro Taiao

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in areas with excessive dust, vibration, or direct sunlight. Proper ventilation is crucial for optimal performance and longevity.

8. Te Raru

9. Whakatakotoranga

10. Raihana me te Tautoko

10.1. Nga Korero Whakaputanga

Moxa products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa webpae. Puritia to tohu hoko mo nga kereme whakamana.

10.2. Tautoko Hangarau

If you encounter any issues that cannot be resolved using this manual, please contact Moxa technical support. You can find contact information on the official Moxa webpae (www.moxa.com) na roto ranei i to tohatoha rohe.