Ka mutu te huaview
The Oxygenics Marvel Chrome Rain Shower Head (Model 57288) is designed to enhance your showering experience with its innovative features and robust construction. This fixed shower head offers 9 unique spray settings, including a distinctive Waterfall setting, and features a substantial 8-inch face for broad coverage. It is engineered to intensify water pressure, providing an efficient and satisfying flow.
Whakaahua 1: Mua view of the Oxygenics Marvel Chrome Rain Shower Head, showcasing its square design and multiple nozzles.
Āhuatanga matua:
- 9 Unique Spray Settings: Includes an innovative Waterfall setting for varied showering experiences.
- Tae Roa: Extends 7.5 inches from the shower arm, providing added versatility.
- Pressure Boosting: Multi-Oxygenics engine technology intensifies water pressure for enhanced efficiency.
- Increased Height: Increases shower height by 3 inches, accommodating various user heights.
- Kapi Whānui: Substantial 8-inch face delivers extreme spray coverage.
- Hanga Roa: Made from Acrylonitrile Butadiene Styrene with a polished chrome finish.
Whakatakotoranga
| Waitohu | Ngā Hāora |
| Tau tauira | 57288 |
| Kāhua | Hou |
| Hanga | Tapawhā |
| Rauemi | Acrylonitrile Butadiene Styrene |
| Momo Whakaoti | Chrome kua orohia |
| Momo Tāuta | Whakanohoia ki runga taiepa |
| Rere Rere | 1.8 GPM (6.8 L/min) Maximum; 1.35 GPM (5.11 L/min) Minimum at 45 PSI |
| Tae | Chrome |
| Hunga Hua | 8.26"L x 8.02"W |
| Tau o Tautuhinga | 9 |
| Taumaha Tūemi | 2 pauna |
| Nga Waahanga kei roto | Plumber's Tape, Rain Shower Head |
| UPC | 010147572889 |
Tatūnga me te Tāuta
This section provides general instructions for installing your Oxygenics Marvel Chrome Rain Shower Head. For specific plumbing configurations, consult a professional plumber.
Nga Utauta me nga Rawa e Hiahia ana (Kaore i te whakauru):
- Te Whiwhi, te Kiwiti ranei
- Rag or Cloth (to protect finish)
- Thread Seal Tape (Plumber's Tape is included)
Hipanga Tāuta:
- Whakaritea te Ringa Kaukau: Ensure the existing shower arm is clean and free of any old thread seal tape or debris. If replacing an old shower head, unscrew it counter-clockwise and remove it.
- Tāpirihia te Rīpene Hiri Miro: Wrap the threads of the shower arm with the included plumber's tape. Wrap 3-4 times clockwise around the threads, ensuring a tight seal.
- Whakapirihia te Upoko Uau: Carefully screw the Oxygenics Marvel Shower Head onto the taped threads of the shower arm. Turn clockwise by hand until it is finger-tight.
- Tighten with Wrench: Using an adjustable wrench or pliers, gently tighten the shower head an additional quarter to half turn. Use a rag or cloth to protect the chrome finish from scratches. Kaua e whakakaha rawa, as this can damage the shower head or plumbing.
- Tirohia mo nga turuturu: Turn on the water supply and check for any leaks around the connection point. If leaks occur, tighten slightly more or reapply thread seal tape.
Figure 2: The Oxygenics Marvel Shower Head properly installed on a standard shower arm, ready for use.
Nga Tohutohu Whakahaere
The Oxygenics Marvel Shower Head features 9 distinct spray settings, allowing you to customize your showering experience. The settings are easily adjustable.
Te Huri Tautuhinga Rehu:
To change the spray pattern, locate the selector lever or dial on the perimeter of the shower head. Gently rotate this mechanism to cycle through the available settings. Each click or distinct position corresponds to a different spray pattern, including the unique Waterfall setting.
Figure 3: The shower head operating with a typical spray pattern, demonstrating water flow from multiple nozzles.
Figure 4: The shower head demonstrating its unique Waterfall spray setting, providing a broad, gentle cascade of water.
Figure 5: The shower head displaying a more concentrated spray pattern, ideal for targeted rinsing.
Flow Rate Information:
The shower head operates at a maximum flow rate of 1.8 Gallons Per Minute (GPM) or 6.8 Liters Per Minute (LPM). At 45 PSI, the minimum flow rate is 1.35 GPM (5.11 LPM). This design ensures efficient water usage while maintaining powerful pressure.
Te tiaki
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Oxygenics Marvel Shower Head.
Te horoi i te pane kaukau:
- Whakapai auau: To maintain the polished chrome finish, wipe the shower head with a soft cloth and mild soap and water solution. Rinse thoroughly with clean water and dry immediately to prevent water spots.
- Tango Putunga Kohuke: If mineral deposits (limescale) build up on the nozzles, gently rub them with your finger or a soft brush. For stubborn deposits, soak the shower head in a solution of equal parts white vinegar and water for 30 minutes to an hour. Rinse thoroughly after soaking.
- A ape i nga kaihoroi kino: Do not use abrasive cleaners, scouring pads, or chemical solvents, as these can damage the chrome finish and the Acrylonitrile Butadiene Styrene material.
Raparongoā
E pā ana tēnei wāhanga ki ngā raruraru noa ka pā mai ki tō pane kaukau.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Te Peehanga Wai Iti |
|
|
| Leaking from Connection |
|
|
| Uneven Spray Pattern |
|
|
Pūtāhui me te Tautoko
For warranty information or technical support regarding your Oxygenics Marvel Chrome Rain Shower Head, please contact Oxygenics directly.
While specific warranty details are not provided in this manual, most Oxygenics products come with a manufacturer's warranty covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
Kaihanga: Ngā Hāora
For the most current support contact information, please visit the official Oxygenics website or refer to the packaging that came with your product.
