Kupu Whakataki
This manual provides detailed instructions for the installation, operation, and maintenance of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp, model PB-575-B. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Whakaahua 1: Mua view of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B). This image shows the clear lens, the upper LED light bars, and the lower projector-style LED elements, along with the Custom Dynamics logo at the bottom.
Nga korero haumaru
Kia mau tonu nga whakaritenga haumaru e whai ake nei:
- Momotuhia te pākahiko o te waka i mua i te mahi i tētahi mahi hiko.
- Me whakarite kia mau nga hononga katoa, kia tika hoki te kiriweti kia kore ai te ara iahiko poto.
- Mena kāore koe i te tino mōhio ki ngā mahi tāutanga, whakapā atu ki tētahi tohunga hangarau.
- Kaua e whakarerekē i te paneamp in any way, as this may void the warranty and compromise safety.
- Mau taputapu whakamarumaru whaiaro (PPE) e tika ana i te wa e whakauru ana.
Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- 1x Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B)
- 1x Wiring Harness (if applicable, check product packaging)
- 1x Manual Tohutohu (tenei tuhinga)
Tatūnga me te Tāuta
- Whakaritenga: Park the vehicle on a level surface and turn off the ignition. Disconnect the negative terminal of the vehicle's battery.
- Remove Existing Headlamp: Carefully remove the bezel or retaining ring securing the existing 5 3/4" headlamp. Disconnect the wiring harness from the old headlamp.
- Install ProBEAM Headlamp: Connect the wiring harness of the ProBEAM LED headlamp to the vehicle's headlamp connector. Ensure the connection is secure.
- Secure Headlamp: Place the ProBEAM LED headlamp into the headlamp bucket. Reinstall the retaining ring or bezel to secure the headlamp i te waahi.
- Tūhono Pūhiko: Honoa anō te pūrua kino o te pākahiko o te waka.
- Taumahinga Whakamatau: Turn on the vehicle's ignition and test the headlamp's low beam, high beam, and any integrated auxiliary functions (e.g., daytime running lights, if applicable).
- Whāinga: Whakaritea te paneamp aim according to local regulations and for optimal visibility without blinding oncoming traffic. Refer to your vehicle's service manual for specific aiming procedures.
Note: Specific installation steps may vary depending on the vehicle model. Always refer to your vehicle's service manual for detailed instructions on removing and installing headlamps.
Nga Tohutohu Whakahaere
The Custom Dynamics ProBEAM LED Headlamp operates in conjunction with your vehicle's existing headlamp switch. It features both low beam and high beam functions.
- Kurupae iti: Activate your vehicle's low beam setting for standard illumination.
- Kurupae Teitei: Activate your vehicle's high beam setting for increased illumination when conditions permit.
The LED technology provides instant-on illumination and a crisp, clear light output. No special operating procedures are required beyond standard vehicle headlamp mahi.
Te tiaki
The Custom Dynamics ProBEAM LED Headlamp is designed for long-lasting performance with minimal maintenance.
- Te horoi: Horoia te paneamp lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the lens.
- Tirotiro: Tirohia te upoko i ia waamp for any signs of damage, loose connections, or moisture ingress.
- Whakakapi Purama: The LED elements are designed to last the lifetime of the product and are not user-replaceable. If the headlamp malfunctions, contact Custom Dynamics support.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Tihiamp e kore e marama |
|
|
| Tihiamp flickers or is dim |
|
|
| Te makuku i roto i te arotahi |
|
|
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | PB-575-B |
| Tihiamp Rahi | 5 3/4 inihi |
| Puna Maama | LED |
| Tae | Black (housing), Clear (lens) |
| Rauemi Arotahi | Polycarbonate |
| Āhuahira Motuhake | High Beam functionality |
| Taumaha Tūemi | 2.25 pauna |
| UPC | 644978545677 |
Pūtāhui me te Tautoko
For warranty information, technical support, or replacement parts, please contact Custom Dynamics directly. Refer to the official Custom Dynamics website for the most current warranty policy and contact details.
Custom Dynamics Contact Information:
- Webpae: www.customdynamics.com
- Waea: Tirohia webpae mo nga nama whakapā o naianei.
- Email: Refer to webpae mō ngā īmēra whakapā o nāianei.
