Fluval 107 Performance Canister Filter User Manual

Kupu Whakataki

Image: The Fluval 107 Performance Canister Filter, a compact black unit with red and grey accents, designed for efficient aquarium filtration.

The Fluval 107 Performance Canister Filter is engineered to provide powerful and efficient filtration for aquariums up to 30 gallons. Utilizing cutting-edge Fluval eTEC (Efficient Technology) construction, this filter delivers robust pump performance and operates with remarkable quietness, consuming minimal energy. Its durable design ensures consistent pumping power and pressure, contributing to a healthy and clean aquatic environment.

Nga korero haumaru

Please read and understand all safety instructions before operating the Fluval 107 Performance Canister Filter. Failure to follow these instructions may result in damage to the product, injury, or electric shock.

• Always disconnect the power supply before performing any maintenance, cleaning, or handling the filter.
• Ensure your hands are dry when plugging or unplugging the filter from the power outlet.
• Kaua e whakahaerehia te tātari mēnā kua pakaru te taura hiko, te mono rānei.
• This appliance is intended for indoor use only. Do not expose to water or rain.
• Ensure the filter is placed on a stable, level surface below the aquarium water level to allow for proper siphoning and operation.
• Kaua e taea e nga tamariki.

He aha kei roto

Image: A visual representation of all components included with the Fluval 107 filter, such as the filter unit, pre-filter basket, media baskets, hoses, and various media types.

Your Fluval 107 Performance Canister Filter package includes all necessary components for immediate setup and operation:

• Fluval 07 Filter Unit (7.5" L x 7" W x 13.7" H)
• Kete Tātari-mua
• Media Cover, Basket & Handle
• Intake Assembly (10.5" / 26.5 cm)
• Ribbed Hosing (9.8 ft / 3 m, 14.5 mm Ø)
• Pupuha Putanga
• Rim Connector Sets
• Authentic Fluval Media: Carbon, Quick-Clear, BioFoam+, Bio-Foam (2x), Bio-Foam Max (2x)

Tatūnga

Initial Assembly and Placement

To begin, ensure the filter is properly set up and connected to your aquarium. Place the filter on a stable surface, ideally below the aquarium to facilitate water flow. Connect the intake and output hoses securely to the filter unit and the aquarium.

Tāuta Pāpāho

Image: A diagram illustrating the Aquastop Valve, Lift-Lock Motor Head Clamps, EZ-Lift Media Baskets, and Quick Primer features for easy maintenance.

The Fluval 107 features EZ-Lift media baskets with a new center handle, allowing for easy removal of the media stack with just one finger. Fill the media baskets with the included Fluval media according to the recommended layering for optimal filtration (mechanical, chemical, biological). The unique vertical pre-filter cartridge provides more surface area for enhanced mechanical filtration.

Te Whakapai i te Tātari

Once all connections are secure and media is in place, use the redesigned primer with the larger easy-grip handle to start the filter. This action will draw water from the aquarium into the filter, initiating the filtration process. Ensure all air is expelled from the system for quiet and efficient operation.

Mahi

Putanga Kaha

Image: A graph illustrating the consistent pumping power and pressure of the Fluval 07 series filters over time, compared to competitive filters.

The Fluval 107 is part of the 07 series, known for generating constant pumping power and pressure that endures over time. The 107 model provides a pump performance of 145 US Gal/h (550 L/h), ensuring effective water circulation and filtration for aquariums up to 30 gallons.

Mahi Ultra-Qui

Image: A cutaway diagram highlighting the components contributing to the Fluval 07 series' ultra-quiet operation, including a precise copper wound bobbin, sound dampening shaft support points, and rubber feet stabilizers.

Designed with a precision-crafted pump, the Fluval 107 operates up to 25% quieter than previous generations. This is achieved through features like a precise copper wound bobbin, sound dampening shaft support points, a recalibrated impeller magnet joint, and rubber feet stabilizers, making it an ideal choice for a peaceful aquatic environment.

Pungao Pungao

Image: A chart comparing the pump power, energy consumption, and estimated running cost per year for different Fluval 07 series models, showing the 107 model's low 10W consumption.

The Fluval 107 filter is highly energy-efficient, drawing as little as 10 watts of electrical energy. This low power consumption is comparable to a single household LED light bulb, making it an economical choice for continuous operation.

Te tiaki

Te horoi i nga wa katoa

Regular maintenance is crucial for the optimal performance and longevity of your Fluval 107 filter. It is recommended to clean the filter after use or as needed based on aquarium conditions. Regularly check and clean the intake strainer and pre-filter basket to prevent clogging and maintain efficient water flow.

To clean, disconnect the filter from power. Use the Aquastop Valve to stop water flow and detach the hoses. The Lift-Lock Motor Head Clamps allow for quick release and attachment of the motor head, providing easy access to the filter media baskets.

Whakakapinga Papaaho

The EZ-Lift media baskets with their center handle make media removal simple and mess-free. Periodically replace or rinse the filter media as recommended by Fluval to ensure effective mechanical, chemical, and biological filtration. Refer to the specific media packaging for replacement schedules.

Raparongoā

This section provides solutions to common issues you might encounter with your Fluval 107 Performance Canister Filter.

• Te Rere o te Wai i Whakaitihia: Check for clogged intake strainer or pre-filter. Clean media baskets and impeller. Ensure hoses are not kinked.
• Haruru nui: Ensure the filter is properly primed and all air has been expelled from the system. Check for impeller obstruction or wear. Verify the filter is on a stable, level surface.
• turuturu: Ensure all hose connections are tight and O-rings on the motor head are properly seated and lubricated. Check for cracks in the housing or hoses.
• Kāore te Tātari e Tīmata: Verify power connection. Check if the impeller is jammed. Ensure the filter is primed correctly.

If problems persist, refer to the Fluval support webpae, whakapā atu ranei ki te ratonga kiritaki mo etahi atu awhina.

Whakatakotoranga

Ahu

Image: A diagram showing the dimensions of the Fluval 107 filter: 7.5 inches (19 cm) wide and 13.7 inches (35 cm) high.

The Fluval 107 filter unit measures approximately 7.5 inches (19 cm) in width and 13.7 inches (35 cm) in height. Its compact design allows for easy placement in most aquarium cabinets.

Model Comparison and Technical Data

Image: A detailed table comparing specifications across the Fluval 07 series models (107, 207, 307, 407), including UPC, recommended aquarium size, pump performance, filter dimensions, and wattage.

Pūtāhui me te Tautoko

Nga korero Whakaputanga

The Fluval 107 Performance Canister Filter comes with a Manufacturer Warranty. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty card included with your product or visit the official Fluval webpae.

Tautoko Kiritaki

For technical assistance, troubleshooting, or inquiries about replacement parts, please contact Fluval customer support. You can typically find contact information, FAQs, and additional resources on the official Fluval website or through your product retailer. Always have your model number (A440) and purchase date ready when contacting support.

Visit the official Fluval Store for more information: Fluval Store on Amazon