Donner Revecho Reverb Delay Pedal EC1118 Instruction Manual

1. Hua Neke Atuview

The Donner Revecho is a versatile 2-in-1 guitar effect pedal, combining both reverb and delay effects. Designed for electric guitarists, it offers a compact solution for adding depth and ambiance to your sound. This pedal features independent controls for each effect, including a Tap Tempo function for precise delay synchronization and an Effect Tail feature for natural decay.

Āhuatanga matua:

• 2-in-1 Pedal: Seamlessly integrates delay and reverb effects.
• Instant Precision Control: Adjustable effect level, delay time, delay feedback, and reverberation time.
• Tap Tempo: Provides instantaneous control over delay time for rhythm synchronization.
• Effect Tail: Enhances playability by allowing notes and chords to decay naturally after disengagement.
• Hoahoa Kiato: User-friendly form factor with buffer bypass for tonal purity.

Whakaahua 1: Mua view of the Donner Revecho Reverb Delay Pedal.

2. Tohutohu Tatūnga

Nga Whakaritenga Mana:

The Donner Revecho pedal requires a 9V DC power adapter with a center-negative polarity and a minimum current of 100mA. This product does not come with a battery compartment. Using an improper power supply may cause the pedal to malfunction or result in damage.

Te hono i te Pedal:

1. Honoa to kita ki te IN Jack i te taha matau o te pedal ma te whakamahi i te taura taputapu 1/4-inihi paerewa.
2. Honoa te KI WAHO Jack i te taha maui o te pedal ki tou ampte pētera hiko, te pētera rānei e whai ake nei i roto i tō mekameka tohu mā te whakamahi i tētahi taura taputapu paerewa 1/4-inihi.
3. Tūhonohia te pūurutau hiko 9V DC ki te 9V DC Jack tāuru.

Whakaahua 2: Koki view showing the input (IN) and output (OUT) jacks, and the 9V DC power input.

3. Nga Tohutohu Whakahaere

The Revecho pedal features five control knobs and two footswitches for comprehensive sound shaping.

Mana:

• REVERB: Adjusts the overall level or intensity of the reverb effect.
• TĀTAI: Controls the length of the reverb tail, from short to long.
• TAUMATA: Whakaritea te rōrahi whakaputa whānui o te hikoi.
• WHAKAARO: Determines the number of delay repeats. Higher settings result in more repeats.
• TATAU: Controls the delay time, from short slap-back echoes to long, atmospheric delays.

Whakawhiti Waewae:

• REVERB HOLD (TAIL): Activates or deactivates the reverb effect. Holding this footswitch engages the Effect Tail feature, allowing the reverb to naturally decay even after the effect is disengaged.
• DELAY HOLD (TAP): Activates or deactivates the delay effect. Tapping this footswitch multiple times sets the Tap Tempo for the delay time. Holding this footswitch will sustain the current delay repeats.

Whakaahua 3: Runga view of the pedal with control knobs and footswitches.

4. Tiaki

To ensure the longevity and optimal performance of your Donner Revecho pedal, follow these maintenance guidelines:

• Te horoi: Whakamahia he kakahu ngohengohe, maroke hei horoi i waho o te hikoi. A ape i te whakamahi i nga kai horoi, i nga whakarewa ranei, na te mea ka pakaru te mutunga.
• Rokiroki: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. If not in use for an extended period, disconnect the power supply.
• Hononga: Tirotirohia nga hononga taura katoa mo te kakahu me te pakaru. Me whakarite kia noho kore he puehu me te para o nga koo.

5. Te Raru

If you encounter issues with your Donner Revecho pedal, refer to the following common problems and solutions:

• Kore Oro:
  • Ensure the power adapter is correctly connected and providing the specified 9V DC, center-negative power.
  • Tirohia ngā taura katoa o ngā taputapu mō te hononga tika me te mahi tika.
  • Verify that the pedal is engaged (LEDs are lit) and the LEVEL knob is not set to minimum.
• Weak or Distorted Signal:
  • Check the power supply; insufficient current (below 100mA) can cause performance issues.
  • Ensure all cables are in good condition and fully inserted.
  • Adjust the LEVEL knob to an appropriate setting.
• Delay/Reverb Not Functioning:
  • Confirm that the respective effect is engaged via its footswitch.
  • Check the REVERB, DECAY, FEEDBACK, and DELAY knobs to ensure they are not set to minimum or extreme settings that might make the effect imperceptible.

6. Whakatakotoranga

7. Pūtāhui me te Tautoko

Mōhiohio Pūtāhui:

This Donner product is covered by a 2-tau pūtāhui mai i te ra o te hokonga. Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana.

Tautoko Kiritaki:

For further assistance, technical support, or warranty inquiries, please visit the official Donner webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Ko te nuinga o nga wa ka kitea nga korero whakapiri i runga i te kohinga hua, i te kaihanga ranei webpae.