1. Tatūnga me te Tāuta
1.1 I mua i to tiimata
Ensure all necessary components are present and that you have the required tools. Turn off the main water supply to the kitchen sink area before starting installation. Clear the workspace under the sink.
1.2 Utauta e hiahiatia ana (Kaore i whakaurua)
- Kowiri ka taea te whakarite
- Panikitini Piri
- Te putty a te paramu, te hiri silicone rānei
- rama rama
- Mohiti haumaru
1.3 Nga Waahi Whakataunga
- Whakaritea te Totohu: If installing on a new sink, ensure the mounting holes are correctly sized. For existing sinks, remove the old faucet. Clean the sink surface thoroughly.
- Tāutahia te Pereti Papa (Whiringa): If your sink has multiple holes and you are using the deck plate, apply plumber's putty or silicone sealant to the underside of the deck plate. Position it over the sink holes.
- Maunga te Korere: Insert the faucet body through the center hole of the deck plate (if used) and the sink. From underneath the sink, secure the faucet with the provided washer and mounting nut. Tighten firmly but do not overtighten.
- Honoa ngā raina wai: Attach the hot and cold water supply lines from the faucet to your home's water supply valves. Ensure connections are hand-tight, then use a wrench for a quarter turn. Do not overtighten.
- Install Sprayer Hose: Connect the pull-down sprayer hose to the quick-connect fitting under the faucet. Ensure it clicks securely into place. Attach the weight to the sprayer hose at the indicated position to ensure proper retraction.
- Install Soap Dispenser: Insert the soap dispenser body into its designated hole on the sink or deck plate. Secure it from underneath with the provided nut. Fill the dispenser from the top.
- Whakamātautau mō ngā turuturu: Turn on the main water supply. Check all connections for leaks. Operate the faucet and sprayer to ensure proper function and check for any drips.
Whakaahua: Ka mutuview of the Moen Arlo kitchen faucet and soap dispenser components, showing the main faucet body, pull-down sprayer, and separate soap dispenser unit.
2. Nga Tohutohu Whakahaere
2.1 Te Whakahaere Rere Wai me te Pāmahana
- Whakakā/Weto: Hiki ake te kakau hei whakakā i te wai. Pēhia te kakau ki raro hei whakaweto i te wai.
- Whakatika Rere: Ka nui ake te hikitanga o te kakau, ka nui ake te rere o te wai.
- Whakaritea te Mamahana: Whakanukuhia te kakau ki te taha maui mo te wai wera, ki te taha matau mo te wai matao.
2.2 Te Whakamahi i te Pūwero Tōia-ki-raro
- Whakaroahia te Pūwero: Grasp the sprayer head and pull it down from the faucet spout. The hose allows for extended reach.
- Change Spray Mode: Press the button on the sprayer head to switch between aerated stream and powerful rinse spray.
- Retract Sprayer: When finished, guide the sprayer head back into the spout. The hose weight will assist in smooth retraction.
Image: A person using the Moen Arlo kitchen faucet, demonstrating the ease of operation and the pull-down sprayer functionality in a kitchen setting.
3. Tiaki me te Tiaki
3.1 Cleaning the Faucet Finish
To maintain the Spot Resist Stainless finish, clean regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish and void the warranty. For stubborn spots, use a mild soap and water solution, then rinse and dry thoroughly.
3.2 Cleaning the Aerator
If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the tip of the sprayer head. Rinse any debris from the screen under running water. Reattach the aerator, ensuring it is securely tightened.
3.3 Sprayer Hose Maintenance
Periodically check the pull-down hose for kinks or obstructions that might impede its movement or water flow. Ensure the hose weight is positioned correctly to allow for smooth retraction.
4. Aratohu Rapanga
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Te rere wai iti | Pūwero hau kua purua; ngā takirere kati kua kati ā-wāhanga; te raina tuku hiko kua piko. | Clean the aerator. Ensure shut-off valves are fully open. Check supply lines for kinks. |
| Ka turuturu te paipa mai i te pūwero | Kāritere kua tawhito. | Contact Moen customer service for a replacement cartridge. |
| Leaks from base of faucet | Loose mounting nut; improper sealant. | Tighten mounting nut. Reapply plumber's putty or silicone sealant if necessary. |
| Kāore te pūwero e hoki whakamuri katoa | Hose obstruction; incorrect weight placement. | Clear any obstructions under the sink. Adjust the position of the hose weight. |
| Difficulty changing spray mode | Mineral buildup in sprayer head. | Remove sprayer head and soak in a vinegar solution to dissolve mineral deposits. |
5. Whakatakotoranga Hua
- Ingoa Tauira: Moen Faucet KTN P-DWN SS 15.33IN 87087EWSRS
- Waitohu: Moen
- Momo Mutu: Polished, Spot Resist Stainless
- Rauemi: Kowiri tira
- Momo Whakapuru: Maunga Papa, Kōhao Kotahi
- Te maha o nga Kakau: 1
- Tatau poka: 4 (for faucet, deck plate, and soap dispenser)
- Āhuahira Motuhake: Kumea Raro Rehu
- Rere Rere Morahi: 1.5 Karini mo ia Meneti
- Teitei mokowhiti: 15.33 Inihi
- Tae Tonu: 7.87 Inihi
- Taumaha Tūemi: 7.1 Pauna
- Rahi Hua: 10"D x 10"W x 10"H
- Nga Waahanga Kei roto: Moen Faucet KTN P-DWN SS 15.33IN 87087EWSRS (includes faucet, deck plate, and soap dispenser)
6. Nga Korero Whakaputanga
This Moen product is covered by a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official warranty documentation included with your purchase or visit the official Moen webpae. Puritia to tohu hoko mo nga kereme whakamana.
7. Tautoko Kiritaki
For further assistance, technical support, or to order replacement parts, please contact Moen customer service. You can typically find contact information on the Moen website or in the packaging materials that came with your faucet.
When contacting support, please have your product model number (87087EWSRS) and date of purchase available.
