Kupu Whakataki
Thank you for choosing the Tascam TH-05 Monitoring Headphones. These headphones are designed to provide accurate and balanced audio reproduction, making them ideal for studio monitoring, mixing, and general listening. This manual provides essential information for the proper setup, operation, and maintenance of your TH-05 headphones.
Whakaahua: Mua view of the Tascam TH-05 Monitoring Headphones, showcasing the black earcups, padded headband, and the Tascam TH-05 logo on the left earcup.
Nga waahanga matua
- Clean, balanced, honest representation of your audio source.
- Closed-back, circumaural design for excellent sound isolation.
- Earcups with 180-degree rotation for flexible monitoring and storage.
- Equipped with 40mm magnet drivers and dynamic transducers for clear sound.
- Strong, flexible, and lightweight manganese headband for durability and comfort.
- Tightly-stitched, padded headband and ear cups ensure comfortable wear during long sessions.
- Long cable length of approximately 9.8ft (3m) when fully extended, providing ample movement.
Tatūnga
- Wewete ana: Carefully remove the headphones and any included accessories from the packaging. Ensure all components are present, including the headphones and the coiled cable.
- Hononga taura: The TH-05 headphones feature a permanently attached coiled cable. Connect the 3.5mm (1/8-inch) stereo mini-jack plug of the cable to the headphone output of your audio device (e.g., audio interface, mixer, computer, smartphone).
- Using the 1/4-inch Adapter: If your audio device has a 6.3mm (1/4-inch) headphone jack, use the included 1/4-inch adapter. Screw the adapter onto the 3.5mm plug of the headphone cable until secure.
- Te whakatikatika i te Peepee: Extend or retract the headband slides to fit your head comfortably. The earcups should fully enclose your ears without excessive pressure.
Whakaahua: Taha view of the Tascam TH-05 Monitoring Headphones, highlighting the coiled cable connected to the left earcup and the 'L' indicator.
Nga Tohutohu Whakahaere
- Te mau i nga Waea: Place the headphones on your head, ensuring the 'L' (Left) earcup is on your left ear and the 'R' (Right) earcup is on your right ear. Adjust the headband for a snug, comfortable fit.
- Mana Rōrahi: Adjust the volume using the controls on your audio source device. The TH-05 headphones do not have inline volume control. Start with a low volume and gradually increase it to a comfortable listening level.
- Aroturuki: For critical listening and monitoring, ensure your audio source is clean and free of distortion. The closed-back design provides passive noise isolation, helping you focus on the audio.
- Te Hurihanga o te Kapu Taringa: The earcups can rotate 180 degrees. This feature is useful for single-ear monitoring or for folding the headphones flat for storage and transport.
Te tiaki
- Te horoi: Use a soft, dry cloth to clean the exterior surfaces of the headphones. For ear pads, gently wipe with a slightly damp kakahu mēnā e tika ana, ā, waiho kia maroke rawa i te hau i mua i te whakamahinga. Kaua e whakamahi i ngā matū kaha, i ngā kaihoroi whakakoi rānei.
- Rokiroki: When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. The 180-degree earcup rotation allows them to be folded flat for compact storage.
- Tiaki taura: Avoid sharp bends or excessive pulling on the cable. While durable, improper handling can lead to internal damage.
- Aukati i te makuku: Kaua e tukuna nga taringa ki te wai, ki te makuku nui ranei.
Image: A black carrying pouch with the Tascam logo, suitable for storing the TH-05 headphones.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore he tangi, he iti ranei te rahinga | Kāore te taura i tino hono; He iti rawa te oro o te pūtake oro; He hē te putanga oro kua tīpakohia i runga i te pūrere. | Ensure the 3.5mm (or 1/4-inch adapter) plug is fully inserted into the audio device. Increase the volume on your audio source. Check your device's audio settings to ensure the correct output is selected. |
| Oro kerekere | Volume too high on audio source; Damaged cable or drivers. | Reduce the volume on your audio source. Test with another audio source or device to rule out a problem with the headphones. If distortion persists, contact Tascam support. |
| Sound only from one earcup | Cable partially connected; Audio source balance issue; Damaged cable. | Ensure the cable is fully inserted. Check the balance settings on your audio source. Test with another audio source. If the issue persists, the cable may be damaged. |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tauira | TH-05 |
| Pooro Jack | Tūhono 3.5 mm (me te urutau 1/4-inihi) |
| Hangarau Hononga | Waea |
| Nga Waahanga kei roto | Tauera |
| Rauemi | Kirihou |
| Nga Whakamahinga Motuhake mo te Hua | Music, Monitoring |
| Momo Mana | Volume Control (via source device) |
| Āhuahira taura | Retractable (Coiled) |
| Taumaha Tūemi | 11.2 hekere |
| Hunga Hua | 10 x 8 x 4 inihi |
| Tae | Pango |
| Te Whakanoho Taringa | Ki runga Taringa |
| Tauwehe Puka | Ki runga Taringa |
| Mana Haruru | Active Noise Cancellation (Passive isolation from closed-back design) |
Nga korero Whakaputanga
For detailed warranty information regarding your Tascam TH-05 Monitoring Headphones, please refer to the warranty card included with your product or visit the official Tascam webpae. He rereke nga tikanga me nga tikanga mo te rohe me te waahi hoko.
Tautoko Kiritaki
If you require further assistance or have questions not covered in this manual, please contact Tascam customer support or visit their official website for FAQs, drivers, and additional resources.
Official Tascam Store: Tascam Store on Amazon
