ECOELER 6-inch Dimmable LED Disk Light Instruction Manual

1. About Your ECOELER LED Disk Light

The ECOELER 6-inch Dimmable LED Disk Light is a high-quality, energy-efficient lighting solution designed for various indoor applications. This fixture provides bright, warm white illumination and features a low-profile design for seamless integration into your ceiling.

• Kounga teitei: Features a 7.3-inch round metal light cover for corrosion protection and rust prevention. Equipped with high-quality LED chips, it delivers 1000 lumens at 16.5 watts, ensuring well-balanced light with no flickering and an estimated lifespan of 50,000 hours.
• Maeneene te Whakaiti: Offers a full range of seamless dimming from 5% to 100%, allowing precise control over brightness for any situation, from a soft night glow to bright task lighting.
• Pro Itifile Hoahoa: The ultra-thin 0.9-inch design provides a sleek look, ideal for spaces with low ceilings or for achieving a modern aesthetic.
• Taupānga Whānui: He pai mo damp locations, making it perfect for entrances, living rooms, bedrooms, kitchens, dens, and covered outdoor areas.
• Whakapumautia te Haumaru: ETL and FCC listed, ensuring compliance with safety and quality standards.

2. Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• LED Disk Light Fixture (4 units)
• E26 Adapter and Spring Clips
• Installation Screws (Short and Long)
• Nati Nati
• Pukapuka Tohutohu

3. Nga korero haumaru

Please read and understand all instructions before installing or operating this product. Failure to do so may lead to electric shock, fire, or other hazards that could cause injury or property damage.

• WHAKATŪPATO: Te mate o te ru hiko. Momotuhia te hiko i te hiku, i te waahi ara iahiko ranei i mua i te whakauru, te mahi ranei.
• WHAKATŪPATO: Morearea o te ahi. Whakamahia i roto i nga iahiko kua tohua mo te 120V AC.
• Me whakauru tenei hua ki runga i te waehere whakaurunga e tika ana ma te tangata e mohio ana ki te hanga me te mahi o te hua me nga aitua e pa ana.
• Me whakarite kia mau, kia tika hoki nga hononga hiko katoa.
• Do not modify the fixture or use it for any purpose other than its intended use.
• Kaua e hapai i te taputapu me nga ringa makuku.
• He pai mo damp nga waahi.

4. Tohutohu Tāuta

The ECOELER LED Disk Light can be installed into either a standard junction box or a recessed can (5-inch or 6-inch).

4.1. Junction Box Installation

1. Whakawetohia te hiko: Ensure power is disconnected at the circuit breaker before starting.
2. Tangohia te arotahi: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Hono waea: Connect the supply wires from the junction box to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
4. Attach fixture to junction box: Align the fixture base with the junction box and secure it using the provided screws.
5. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
6. Whakaora mana: Whakahokia te hiko i te waahi iahiko.

4.2. Recessed Can Installation

1. Whakawetohia te hiko: Ensure power is disconnected at the circuit breaker before starting.
2. Tangohia te arotahi: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Install E26 adapter: Screw the E26 adapter into the existing recessed can socket.
4. Hono waea: Connect the fixture wires to the E26 adapter wires using the provided wire nuts (black to black, white to white).
5. Install spring clips: Attach the spring clips to the designated slots on the fixture base.
6. Push disk into can: Carefully push the LED disk light into the recessed can until the spring clips hold it securely in place, flush with the ceiling.
7. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
8. Whakaora mana: Whakahokia te hiko i te waahi iahiko.

5. Nga Tohutohu Whakahaere

The ECOELER LED Disk Light is designed for simple operation and offers smooth dimming capabilities.

5.1. Whakakahuria/Weto

Whakahaerehia te rama mā te whakamahi i tētahi pana pakitara paerewa e hono ana ki te ara iahiko o te rama.

5.2. Taumahi Ngahuru

This fixture is compatible with most standard LED dimmers, allowing for smooth brightness adjustment from 5% to 100%. To dim the light, use a compatible dimmer switch (not included) installed in your electrical system.

6. Tiaki

The ECOELER LED Disk Light requires minimal maintenance.

• Te horoi: Hei horoi i te taputapu, whakarite kia weto te hiko. Whakamahia he ngohengohe, maroke, paku ranei damp kakahu. Kaua e whakamahia ngā matū kaha, ngā kaihoroi whakakoi rānei, nā te mea ka kino pea te whakaotinga, ngā wāhanga hiko rānei.
• Karekau he waahanga e taea ana e te Kaiwhakamahi: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.

7. Te Raru

If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:

If problems persist, contact ECOELER customer support for assistance.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

ECOELER products are designed for quality and durability. This product comes with a limited warranty.

• Pūtāhui: Refer to the product packaging or ECOELER's official webpae mo nga tikanga me nga tikanga whakamana.
• Tautoko Kiritaki: If you encounter any problems during use or have questions regarding installation or operation, please contact ECOELER customer service. We aim to provide a reply within 24 hours.