Pukapuka Kaiwhakamahi mō te Taura Rocstor 50FT 4K HDMI 2.0-4K 60HZ

1. Kupu Whakataki

This manual provides instructions for the Rocstor 50FT 4K HDMI 2.0-4K 60HZ Cable (Model Y10C230-B1). This high-speed HDMI cable is designed for connecting HDMI 2.0 devices over long distances without compromising video quality, supporting resolutions up to 4K at 60Hz.

It features gold-plated male-to-male HDMI 2.0 connectors, supports 4K2K, 3D, and Ethernet functionalities, and is suitable for both indoor and outdoor use. The cable ensures reliable transmission of digital audio and video signals.

2. Tatūnga

Connecting the Rocstor HDMI Cable

1. Identify the 'INPUT' and 'OUTPUT' ends of the cable. The 'INPUT' end connects to your source device (e.g., computer, gaming console, media player), and the 'OUTPUT' end connects to your display device (e.g., TV, projector, monitor).
2. Carefully insert the 'INPUT' connector into the HDMI port of your source device.
3. Carefully insert the 'OUTPUT' connector into the HDMI port of your display device.
4. Ensure both devices are powered on and set to the correct HDMI input.

This image displays the Rocstor 50-foot HDMI cable, highlighting its two gold-plated male HDMI connectors. Text labels 'INPUT' and 'OUTPUT' are visible on the cable near each connector, indicating the intended direction of signal flow for optimal performance.

3. Nga Tohutohu Whakahaere

Once connected, the cable will automatically transmit audio and video signals between your devices. Verify your display device is set to the correct HDMI input channel.

For 4K 60Hz resolution, ensure both your source and display devices support HDMI 2.0 and are configured for this resolution. The cable supports Ethernet over HDMI, allowing for network data sharing between connected devices if both devices also support this feature.

4. Tiaki

To ensure longevity and optimal performance of your Rocstor HDMI cable, follow these guidelines:

• Avoid sharp bends or kinks in the cable, especially near the connectors.
• Store the cable in a loose coil when not in use.
• Keep connectors clean and free of dust. Use a soft, dry cloth to gently wipe them if necessary.
• Kaua e tukuna te taura ki te wera nui, ki te ra tika ranei mo te wa roa.
• Avoid pulling the cable by the wire; always grasp the connector housing when plugging or unplugging.

5. Te Raru

Kāore he Tohu Ataata/Ororongo:

• Ensure the cable is securely connected to both the source and display devices.
• Verify the 'INPUT' and 'OUTPUT' ends are connected correctly (source to 'INPUT', display to 'OUTPUT').
• Check that both devices are powered on.
• Whakaūtia kua whakatakotoria te pūrere whakaatu ki te tāuru HDMI tika.
• Test with a different HDMI port on your display or source device, if available.
• Test with a shorter, known-working HDMI cable to rule out device issues.

Tohu keropi, Waitohu Mokowhiti ranei:

• Kia tino mohio kei pakaru, kei piko rānei te taura.
• Tirohia mo nga hononga korekore.
• Reduce the resolution or refresh rate on your source device to see if the issue persists. Some devices may struggle to maintain a stable 4K 60Hz signal over long distances if not properly optimized.

6. Whakatakotoranga

7. Pūtāhui me te Tautoko

Rocstor products are designed for reliability and performance. For detailed warranty information, technical support, or customer service inquiries, please refer to the official Rocstor website or contact their customer support team directly. It is recommended to retain your purchase receipt for any warranty claims.