Rollerhouse AC227-13 Single Radio Receiver

1. Kupu Whakataki

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Rollerhouse AC227-13 Single Radio Receiver. Designed for wall mounting, this 433MHz receiver offers reliable wireless control for garage door openers, gate systems, and other compatible devices. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Whakaahua 1: Mua me muri view of the Rollerhouse AC227-13 Single Radio Receiver, showing its compact design and terminal block.

2. Nga Hua o te Hua

• 433MHz Long-Range Signal: Provides reliable wireless control up to 500 feet in open areas, suitable for garage doors, gates, and alarm systems.
• Tāuta-Tautunga Maamaa: Features a compact design with pre-drilled screw holes for secure and straightforward mounting.
• Hototahi Ao: Designed to work with most 433MHz transmitters, including A-OK and other switch control motors.
• Simple Pairing & LED Indicator: Facilitates quick synchronization with compatible transmitters. An integrated LED confirms successful signal reception.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• 1x AC227-13 Radio Receiver
• 1x Quick-start guide (refer to this manual for detailed instructions)

Figure 2: The AC227-13 receiver alongside its product packaging, indicating a "Wall Type Radio Receiver".

4. Whakatakotoranga

Whakaatu 3: Taipitopito view of the receiver's back panel, showing the model number, input/output specifications, and CE marking.

5. Nga korero haumaru

Kia mau ki nga whakaritenga haumaru e whai ake nei hei aukati i te whara, i te kino ranei o te taputapu:

• Always disconnect power before performing any installation, wiring, or maintenance.
• Ensure all wiring is done by a qualified electrician and complies with local electrical codes.
• Do not expose the receiver to moisture, extreme temperatures, or direct sunlight.
• Kaua e taea e nga tamariki.
• Kaua e ngana ki te whakatuwhera, ki te whakatika ranei i te taputapu. Tukuna atu nga ratonga katoa ki nga kaimahi whai tohu.

6. Tatūnga me te Tāuta

6.1 Whakapuru Taiepa

The AC227-13 receiver is designed for easy wall mounting. Choose a suitable location near your garage door opener or gate control system, ensuring it is protected from environmental elements and within range of your transmitter.

1. Identify a flat, stable surface for mounting.
2. Use the receiver as a template to mark the positions for the mounting screws.
3. Drill pilot holes if necessary, suitable for your mounting screws.
4. Secure the receiver to the wall using appropriate screws (not included).

6.2 Nga Tohutohu Waea

Refer to the wiring diagram below for proper connection. Ensure power is disconnected before wiring.

Figure 4: Detailed wiring diagram illustrating connections for DC motor, 12V power, control signals (GND, STOP, DOWN, UP), AC input (L, N), and external manual switch/wind/light/rain sensors.

• AC IN (L, N): Connect your 100-240VAC power supply to these terminals.
• CONTROL (GND, STOP, DOWN, UP): These terminals are for connecting external manual switches or sensors (e.g., wind, light, rain sensors).
• DC MOTOR (M+/-, M+/-): Connect your 24V DC motor to these terminals. Ensure correct polarity.
• 12V (12V, GND): Provides a 12V DC output for powering compatible external devices or sensors.

7. Mahi

7.1 Pairing with Transmitters

The AC227-13 receiver features a simple pairing process. Refer to your transmitter's manual for specific instructions on initiating pairing mode. Generally, you will need to press a pairing button on the receiver (often indicated by an LED) and then activate the desired button on your transmitter.

• Locate the pairing button on the receiver (often a small button near the LED indicator).
• Press and hold the pairing button until the LED indicator changes state (e.g., blinks rapidly).
• Within a few seconds, press the button on your 433MHz transmitter that you wish to pair.
• The LED on the receiver should confirm successful pairing (e.g., solid light, then off).

7.2 Mana Taketake

Once paired, the receiver will respond to signals from your transmitter. The typical functions are:

Figure 5: Front panel of the AC227-13 receiver, highlighting the UP, STOP, and DOWN control buttons and the indicator light for setting.

• RUNGA: Activates the motor to move the garage door or gate upwards.
• KATI: Halts the motor's movement.
• TUA: Activates the motor to move the garage door or gate downwards.

8. Te Raru

9. Tiaki

The Rollerhouse AC227-13 receiver requires minimal maintenance:

• Puritia te taputapu kia ma, kia kore he puehu me te para. Whakamahia he kakahu ngohengohe, maroke mo te horoi.
• Periodically check wiring connections to ensure they are secure.
• Avoid exposing the unit to harsh chemicals or abrasive cleaners.

10. Pūtāhui me te Tautoko

Rollerhouse products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Rollerhouse webpae.

If you encounter any issues or have questions regarding the installation or operation of your AC227-13 receiver, please contact Rollerhouse customer support. Provide your product model number and a detailed description of the issue for faster assistance.

Mo etahi atu awhina, ka toro atu koe ki te Rollerhouse Store on Amazon.