JIENUO JN-IP603AR-D-WIFI WiFi IP CCTV Camera User Manual

Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your JIENUO JN-IP603AR-D-WIFI WiFi IP CCTV Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. Keep this manual for future reference.

Ihirangi mokete

• 1 x JIENUO JN-IP603AR-D-WIFI IP Camera
• 1 x Pūurutau Hiko
• 1 x Pukapuka Kaiwhakamahi

Ka mutu te huaview

Familiarize yourself with the various components and connections of your JIENUO WiFi IP Camera.

Atahanga: Ka mutuview of the JIENUO WiFi IP Camera, highlighting key components such as the WiFi antenna, lens, infrared lights, power input, reset button, and RJ45 Ethernet port.

Waenga Matua

• Antenna WiFi: Mō te hononga whatunga ahokore.
• Arotahi: Ka hopu ataata footage.
• Nga Rarama Infrared: Provide night vision capabilities.
• Hiko IN: Ka hono ki te urutau hiko.
• Patene Tautuhi Anō: Whakamahia hei whakahoki i ngā tautuhinga wheketere.
• Tauranga RJ45: For wired Ethernet connection.
• Puoro-roto: Mō te hopu oro.

Atahanga: He tata view of the camera body, indicating the precise location of the built-in microphone.

Atahanga: He roto view of the camera, revealing the Micro SD card slot. This slot supports cards up to 64GB for local storage.

Tatūnga

1. Tāutanga Tinana

1. Kōwhiria he Tauwāhi: Select an outdoor location that provides the desired surveillance coverage. Ensure the camera is within range of your WiFi network or close enough for an Ethernet cable connection.
2. Maunga te Kamera: Use the provided mounting hardware to securely attach the camera to a wall or ceiling. Adjust the camera's angle for optimal viewing.
3. Hono Hono: Plug the power adapter into the camera's 'Power IN' port and then into a power outlet.

2. Hononga Whatunga

Ka tautokohia e te kamera nga hononga Wi-Fi me nga hononga Itarangi waea.

Aratau Wi-Fi

1. Me mohio kei te kaha te kamera.
2. Download the recommended mobile surveillance application (e.g., for iOS or Android) from your device's app store. Refer to the quick start guide for the specific app name.
3. Open the app and follow the on-screen instructions to add a new device. This typically involves scanning a QR code on the camera or manually entering its ID.
4. Select your Wi-Fi network and enter the password when prompted. The camera will connect to your network.

Wired (Ethernet) Mode

1. Connect an Ethernet cable from your router or network switch to the camera's RJ45 port.
2. Me mohio kei te kaha te kamera.
3. Open the mobile app or PC client software. The camera should be automatically detected on your local network. Follow the app's instructions to add and configure the device.

3. Tāuta Kāri SD Micro (Kōwhiringa)

The camera supports Micro SD cards up to 64GB for local video storage.

1. Carefully open the camera's housing to access the Micro SD card slot. (Refer to the product overview image for slot location).
2. Insert the Micro SD card into the slot with the contacts facing down until it clicks into place.
3. Close the housing securely to maintain the camera's waterproof rating.
4. Format the Micro SD card through the camera's settings in the mobile application for optimal performance.

Nga Tohutohu Whakahaere

1. Mobile Surveillance

Access your camera's live feed and settings from your smartphone or tablet using the dedicated mobile application.

• Ora View: Tap on the camera in the app to view the real-time video feed.
• Ororongo: The built-in microphone allows for real-time sound monitoring.
• Tautuhinga: Adjust various camera parameters such as resolution, motion detection sensitivity, and recording schedules.

Atahanga: Illustrates the camera's built-in microphone for audio capture and the ability to view live video remotely on a mobile device.

Atahanga: A smartphone screen showing the interface of the security camera application, demonstrating remote access capabilities.

2. Motion Detection & Email Alert

Configure the camera to detect movement and send alerts.

1. Navigate to the 'Motion Detection' settings within the mobile application.
2. Enable motion detection and adjust the sensitivity level as needed.
3. Set up email alerts by entering your email address. The camera will send notifications when motion is detected.

3. Matakitenga po

The camera is equipped with infrared lights for automatic night vision, providing clear images in low-light conditions.

Atahanga: A visual comparison demonstrating the camera's ability to capture clear images during the day and automatically switch to infrared night vision in low-light or dark conditions.

• Night vision activates automatically when ambient light levels drop.
• The infrared lights illuminate the area, allowing the camera to record in black and white.

4. Whakahoki Mamao

Review tuhia footage from your Micro SD card or NVR remotely.

Atahanga: Depicts the remote playback feature, allowing users to access and review tuhi ataata footage from the camera on their mobile devices from any location.

1. In the mobile app, navigate to the 'Playback' or 'Recordings' section.
2. Tīpakohia te rā me te wā ki te view ngā kaupapa i tuhia.
3. You can download or share specific video clips from the app.

5. ONVIF Hototahi

This camera supports ONVIF protocol, allowing it to integrate with third-party Network Video Recorders (NVRs) and surveillance software.

• Refer to your NVR's manual for instructions on adding ONVIF-compatible devices.
• The camera's default IP address and port can be found in the app or by using a network scanner tool.

Te tiaki

1. Te horoi

• Me horoi i nga wa katoa te arotahi o te kamera ki te kakahu maeneene, maroke kia maamaa te ahua o te ahua.
• Mukua te tinana kamera me te panuiamp kakahu mehemea e tika ana. A ape i te whakamahi i nga matū kino, i nga horoi horoi ranei.

2. Whakahoutanga Firmware

• Check the mobile application periodically for available firmware updates.
• Firmware updates can improve performance, add new features, and enhance security. Follow the in-app instructions for updating.

Raparongoā

Nga take me nga otinga noa

• Karekau te kamera e hono ana ki te Wi-Fi:
  • Me mohio kei te tika te kupuhipa Wi-Fi.
  • Check if the camera is within range of your Wi-Fi router.
  • Tīmataria anō te kāmera me tō pouara.
  • Try connecting via Ethernet cable first to configure Wi-Fi settings.
• No image or poor image quality:
  • Tirohia te hononga hiko.
  • Horoia te arotahi kamera.
  • Ensure sufficient lighting for optimal image capture.
  • Manatokohia te pumau o te whatunga.
• Kāore te kite nekehanga e mahi ana:
  • Me whakarite kia whakahohea te kite nekehanga i roto i ngā tautuhinga taupānga.
  • Whakaritehia nga taumata tairongo.
  • Check if the detection area is correctly configured.
• Micro SD card not recording:
  • Me whakarite kua whakaurua tika te kāri Micro SD.
  • Format the Micro SD card through the app.
  • Check if the card capacity is supported (up to 64GB).
• Camera is offline:
  • Check the internet connection of your router.
  • Verify the camera's power supply.
  • Tīmataria anō te kāmera.

Tautuhi Anō i te Kāmera

If you encounter persistent issues, you may need to reset the camera to its factory default settings.

1. Locate the reset button on the camera (refer to the product overview whakaahua).
2. With the camera powered on, use a thin object (like a paperclip) to press and hold the reset button for approximately 5-10 seconds until you hear a prompt or see an indicator light change.
3. The camera will restart. You will then need to reconfigure it as a new device.

Whakatakotoranga Hangarau

Pūtāhui me te Tautoko

Nga korero Whakaputanga

This JIENUO product comes with a 1-Tau Pūtāhui mai i te rā i hokona ai. Ka hipokina e tēnei pūtāhui ngā hapa hangahanga, ā, ka whakarite kia mahi te hua kia rite ki te tikanga i raro i te whakamahinga noa. Puritia tō taunakitanga hoko mō ngā kereme pūtāhui.

Tautoko Kiritaki

For technical assistance, troubleshooting, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official JIENUO support website. Always provide your product model number (JN-IP603AR-D-WIFI) and purchase details when seeking support.