1. Kupu Whakataki
This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.
Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.
2. Tatūnga me te Tāuta
He mea nui te tāutanga tika mō te mahi tino pai me te haumaru. Āta whai i ēnei mahi.
2.1 Te Wetewete me te Tirotiro
- Carefully remove the sensor from its packaging.
- Inspect the sensor for any visible damage that may have occurred during shipping.
- Manatokohia kei te noho nga waahanga katoa kua whakarārangihia ki te pepa kete.
2.2 Whakapiki i te Pūoko
The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.
- Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
- Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
- Ensure the sensor is oriented correctly for the intended detection application.
Whakaahua 2: Taha view of the S18AW3FF50 sensor, showing the threaded barrel and cable.
2.3 Hononga Hiko
WHAKATŪPATO: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.
The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.
| Tae Waea | Mahi |
|---|---|
| Paraone | AC Line (L1) |
| Kahurangi | AC Neutral (L2) |
| Pango | Output (SPST Light Operate) |
Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.
Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.
3. Mahi
Once installed and wired, the S18AW3FF50 sensor is ready for operation.
3.1 Te Whakakaha
Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.
3.2 Detection Principle
The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).
3.3 Range and Performance
The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.
4. Tiaki
The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.
4.1 Te horoi
- Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
- Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.
4.2 Cable and Connection Inspection
- Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
- Check electrical connections to ensure they remain secure and free from corrosion.
5. Te Raru
This section provides solutions to common issues encountered with the S18AW3FF50 sensor.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te pūoko e whakakā ana | No power supply; Incorrect wiring; Damaged sensor. | Verify power supply (20-250VAC); Check wiring against Table 1; Replace sensor if damaged. |
| Kāore te pūoko e kite i ngā mea | Object out of range (50 mm); Dirty lens; Misalignment; Ambient light interference. | Ensure object is within 50 mm range; Clean sensor lens; Realign sensor; Shield sensor from strong ambient light. |
| Intermittent detection | Vibration; Loose connections; Fluctuating power. | Secure sensor mounting; Check all electrical connections; Ensure stable power supply. |
6. Whakatakotoranga
Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.
- Tauira: S18AW3FF50
- Rangatū: EZ-Beam S18 Series
- Awhe Rapunga: 50 mm
- Whakauru Voltage: 20-250VAC
- Momo Putanga: SPST Solid-State Light Operate
- Roa taura: 2M (6.5FT)
- Momo pūoko: Photoelectric, Fixed Field
- Kaihanga: TE HANGARAU PANE
- ASIN: B07RZTBRLS
- Te Ra Tuatahi Wātea: Hakihea 3, 2021
7. Pūtāhui me te Tautoko
For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official webpae.
Kaupapa Whakahoki: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.
Kaihanga: TE HANGARAU PANE
Mo etahi atu awhina, tirohia te BANNER ENGINEERING official webpae.
