Kupu Whakataki
Thank you for choosing the FLYLINKTECH Battery Jump Starter. This portable device is designed to provide a powerful boost to your vehicle's battery, act as a portable power bank for electronic devices, and offer an integrated LED flashlight for emergencies. Please read this manual thoroughly before using the product to ensure safe and optimal performance.
Nga korero haumaru
Me whai tonu i ngā mahi ārai haumaru e whai ake nei hei ārai i te whara, i te kino rānei o te taputapu, o te waka rānei:
- Kaua e ngana ki te peke ki te timata i te pākahiko tio.
- Me whakarite kia tika te hononga polarity (pai ki te pai, kino ki te kino) kia kore ai e mura, e pakaru rānei.
- Kaua e tukua te whero me te pango clamps ki te pa tetahi ki tetahi.
- Tiakina te taputapu mai i nga tamariki.
- Do not expose the device to rain or extreme temperatures.
- Whakaorangia ki te waahi makariri, maroke ka kore e whakamahia.
- Mena te pākahiko clamps are connected incorrectly, the smart cable will typically alert you with an indicator light or sound. Disconnect immediately and re-connect correctly.
- Momotuhia te clamps from the vehicle battery first, then from the jump starter, after a successful jump start.
Ihirangi mokete
Manatokona kei roto katoa nga mea kei roto i to kete:
- FLYLINKTECH Battery Jump Starter Unit
- Ngā Taura Peke Atamai me te Clamps (Whero me te Pango)
- Tauira Whakatau USB
- EC5 Car Cigarette Lighter Adapter
- Pukapuka Kaiwhakamahi (tenei tuhinga)
Image: The FLYLINKTECH Battery Jump Starter unit, black with red accents, shown alongside its accessories: smart jumper cables (red and black clamps), a USB charging cable, and an EC5 car cigarette lighter adapter.
Ka mutu te huaview
Familiarize yourself with the main components of your jump starter:
- Pātene Hiko: Activates the unit and checks battery level.
- Rarama Tohu LED: Show the remaining battery capacity (e.g., 4 lights for full charge).
- Tauranga Tīmatanga Peke: Connects to the smart jumper cables.
- Ngā Tauranga Putanga USB: For charging mobile phones, tablets, and other USB-powered devices.
- Tauranga Whakauru USB Micro: Hei utu i te waeine tīmata peke.
- Maramarama arahina: Integrated light for illumination.
Tatūnga
Whakataunga Tuatahi
Before first use, fully charge the jump starter. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.
- Connect the Micro USB end of the provided USB charging cable to the jump starter's input port.
- Connect the USB-A end of the cable to a 5V/2A USB wall adapter (not included) or a computer USB port.
- The LED indicator lights will flash during charging and remain solid when fully charged.
Nga Tohutohu Whakahaere
Peke Timata Waka
Ensure the jump starter is at least 50% charged (at least 2 LED indicator lights are solid) before attempting a jump start.
- Turn off the vehicle's ignition and all accessories (lights, radio, A/C).
- Honoa te whero (pai, +) clamp of the smart jumper cables to the positive (+) terminal of the vehicle's battery.
- Honoa te pango (kino, -) clamp of the smart jumper cables to the negative (-) terminal of the vehicle's battery.
- Plug the blue connector end of the smart jumper cables into the jump start port on the jump starter unit. Ensure a firm connection.
- Check the indicator light on the smart jumper cable. A solid green light indicates a correct connection and readiness to jump start. If it's red or flashing, check connections and polarity.
- Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
- Once the vehicle starts, immediately disconnect the blue connector from the jump starter unit.
- Kātahi, momotuhia te pātene pango (-)amp from the vehicle battery, followed by the red (+) clamp.
Te whakamahi hei Peeke Hiko Kawe
The jump starter can charge various electronic devices via its USB output ports.
- Honoa te taura utu USB a tō pūrere ki tētahi o ngā putanga putanga USB i runga i te tīmatanga peke.
- Press the power button on the jump starter to begin charging. The LED indicator lights will show the remaining battery level.
- Disconnect your device once charging is complete. The jump starter will automatically turn off after a period of inactivity.
Te whakamahi i te Rama Rama
The integrated LED flashlight has multiple modes for different situations.
- Press and hold the power button for approximately 3 seconds to turn on the flashlight.
- Press the power button again to cycle through modes: Solid light > SOS signal > Strobe light.
- Pēhia anō te pātene mana mō te 3 hēkona hei whakaweto i te rama.
Te tiaki
- Kei te utu: Recharge the unit after each jump start. For optimal battery life, recharge every 3-6 months even if not used.
- Te horoi: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Rokiroki: Penapenahia te tīmatanga peke ki te wāhi hauhautanga, maroke, kia matara atu i te rā tika me te pāmahana tino kino.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau te waeine e ka ana. | Kua pau katoa te pākahiko. | Whakakīia katoatia te waeine. |
| Karekau te waka e timata i muri i te nganatanga peke. | hē clamp connection; Vehicle battery too low; Engine issues. | Tirohia clamp polarity and connection. Ensure jump starter is sufficiently charged. Consult a mechanic if vehicle still won't start. |
| Smart cable indicator light is red/flashing. | Reverse polarity; Short circuit; Over-temperature. | Disconnect immediately. Re-check connections for correct polarity. Allow unit to cool if hot. |
| Kāore e taea te utu i ngā pūrere o waho. | Unit is off; Low battery; Faulty USB cable. | Press power button to activate. Recharge the unit. Try a different USB cable. |
Whakatakotoranga
- Waitohu: FLYLINKTECH
- Tauira: CF200
- Taumata o nāianei: 1500A
- Te whakahaere Ampera: 1000 Amps
- Momo Pūhiko: 12V (kei roto)
- Hototahi Mihini: Up to 6.0L Gas or 5.0L Diesel engines
- Rahi Hua: 6.22 x 3.35 x 0.83 inihi
- Taumaha Tūemi: 1.7 pauna
- UPC: 886871087216
Note: The 1500A peak current refers to the maximum instantaneous current the unit can deliver. The operating amperage is typically lower.
Pūtāhui me te Tautoko
FLYLINKTECH products are manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official FLYLINKTECH website. Please have your model number (CF200) and purchase date ready when contacting support.
