1. Kupu Whakataki
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your GPI 03A31GM-Methanol Turbine Flow Meter. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage or injury.
The GPI 03A31GM-METHANOL is an aluminum turbine fuel flowmeter designed for accurate measurement of methanol. It features a 1-inch FNPT inlet/outlet and provides accurate readings for flow rates from 3-50 GPM (11-190 LPM).
2. Nga korero haumaru
Always observe safety precautions to reduce the risk of injury or damage to the equipment.
- Hototahi: This meter is specifically designed for use with methanol. DO NOT USE WITH WATER or other incompatible fluids, as this can damage the meter and lead to inaccurate readings or hazardous conditions.
- Tāutatanga: Ensure all connections are secure and leak-free before operation. Follow all local codes and regulations for installation.
- Tiaki: Disconnect power before performing any maintenance. Use only genuine GPI replacement parts.
- Te Whakahaere Wai: Always wear appropriate personal protective equipment (PPE) when handling methanol or other fluids. Refer to the Safety Data Sheet (SDS) for the fluid being measured.
3. Hua Neke Atuview
The GPI 03A31GM-Methanol Turbine Flow Meter is a robust and reliable device for precise fluid measurement. Its compact design and nickel-plated aluminum housing ensure durability and compatibility with methanol.
Whakaahua 3.1: Mua view of the GPI 03A31GM-Methanol Turbine Flow Meter, showing the digital display and control buttons.
Figure 3.2: Annotated diagram highlighting key components and functions: "CALIBRATE" button for configuration, "DISPLAY" button to toggle totals, arrow indicating flow direction, and the 4-digit digital LCD display showing "TOTAL1" (cumulative) and "FAC" (batch) readings.
Āhuatanga matua:
- Nickel-plated aluminum housing for methanol compatibility.
- 6-digit LCD display with floating decimal.
- Two totals: resettable batch total and non-resettable cumulative total.
- Field calibratable for high accuracy.
- Powered by two field-replaceable lithium batteries (5-year life).
- Non-volatile memory protects data during battery replacement.
- Simplified internal parts for easy maintenance.
- Wetted materials: 316 Stainless Steel, Aluminum, Ceramic, PVDF, Tungsten Carbide.
4. Tatūnga me te Tāuta
Proper installation is crucial for accurate readings and safe operation.
- Wewete ana: Carefully remove the flow meter from its packaging. Inspect for any signs of damage.
- Tūnga Whakapuru: Install the meter in a horizontal or vertical position, ensuring the flow direction arrow on the meter body aligns with the fluid flow.
- Paipa: Connect the meter using the 1-inch FNPT inlet/outlet. Use appropriate thread sealant to ensure leak-free connections. Avoid overtightening.
- Mana: The meter is powered by two lithium batteries (included). Ensure they are properly installed.
- Taki Tuatahi: Before introducing fluid, ensure all connections are secure.
5. Nga Tohutohu Whakahaere
The meter features a simple two-button interface for operation and calibration.
Mahinga Whakaatu:
- The 6-digit LCD display shows the current flow total.
- Pehia te WHAKAATU button to toggle between the resettable batch total and the non-resettable cumulative total.
- The display will show "TOTAL1" for the cumulative total and "FAC" (or similar indicator) for the batch total.
Resetting the Batch Total:
- Ensure the display is showing the batch total.
- Patohia me te pupuri i te WHAKAATU button for approximately 3 seconds until the batch total resets to zero.
Whakatikatika:
The meter is factory calibrated in gallons. Field calibration is possible to fine-tune accuracy for specific applications or fluids.
- Pehia te KAUPAPA button to enter calibration mode.
- Follow the on-screen prompts to adjust calibration parameters. Refer to the detailed calibration procedure in the full PDF manual for precise steps.
6. Tiaki
Regular maintenance ensures the longevity and accuracy of your flow meter.
Whakakapinga Pūhiko:
- The meter uses two field-replaceable lithium batteries with an approximate 5-year life.
- When the battery indicator appears or the display becomes dim, replace the batteries.
- The non-volatile memory will protect your cumulative total data during battery replacement.
- Refer to the full PDF manual for detailed instructions on accessing and replacing the batteries.
Te horoi:
- Clean the exterior of the meter with a damp kakahu. Kaua e whakamahi i nga matū kino me nga horoi horoi.
- If internal cleaning is required due to debris, consult the full PDF manual or contact GPI support.
Nga waahanga a-roto:
The meter features simplified internal parts for ease of maintenance. If replacement of internal components is necessary, use only genuine GPI parts and follow the instructions in the detailed manual or seek professional assistance.
7. Te Raru
Ko tenei waahanga e aro ana ki nga take noa ka pa ki a koe.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore he whakaaturanga, he whakaaturanga atarua ranei | Nga papahiko iti, mate ranei | Whakakapihia nga pākahiko. |
| Nga korero tika | Incorrect calibration; Air in line; Meter used with incompatible fluid (e.g., water) | Perform field calibration; Bleed air from the system; Ensure only methanol is being measured. |
| No flow reading | No fluid flow; Meter installed backward; Obstruction in meter | Verify fluid flow; Check flow direction arrow and reinstall if necessary; Inspect for and remove obstructions. |
| Te pakaru i nga hononga | Loose connections; Insufficient thread sealant | Tighten connections; Reapply thread sealant if necessary. |
If problems persist, refer to the comprehensive troubleshooting guide in the full PDF user manual or contact GPI customer support.
8. Whakatakotoranga
| Huanga | Taipitopito |
|---|---|
| Tau tauira | 03A31GM-METHANOL |
| Awhe Rere Rere | 3-50 GPM (11-190 LPM) |
| Tika | +/-1.5% o te panui |
| Rahi Whakauru/Putanga | 1-inch FNPT |
| Rauemi Whare | Konumohe whakakikoruatia nikel |
| Whakaatu | 6-digit LCD with floating decimal |
| Tapeke | Resettable Batch, Non-resettable Cumulative |
| Mana | 2 x Lithium Batteries (5-year life) |
| Rauemi Makuku | 316 Stainless Steel, Aluminum, Ceramic, PVDF, Tungsten Carbide |
| Hototahi | Methanol (Do not use with water) |
| Ahu mōkihi | 9 x 4 x 4 inihi |
| Taumaha Tūemi | 1.59 Pauna |
9. Pūtāhui me te Tautoko
For warranty information, technical support, or to purchase replacement parts, please contact GPI directly.
- Kaihanga: GPI (Great Plains Industries)
- Whaimana Webpae: www.gpi.net
- Pukapuka Kaiwhakamahi (PDF): For a comprehensive guide, download the official PDF manual: Tikiake PDF Manual
Please have your model number (03A31GM-METHANOL) and serial number ready when contacting support.
