Falcon SP2 3.3 Fast Adjust Piggyback Shocks Instruction Manual

1. Hua Neke Atuview

The Falcon SP2 3.3 Fast Adjust Piggyback Shocks are designed to enhance the performance and ride quality of JLU Wrangler Unlimited (4-door) vehicles with a 2-4.5 inch lift. These shocks feature advanced adjustability for various driving conditions, including on-road comfort and off-road stability.

Key features include a Fast Adjust Knob with three compression settings, an eight-position Micro Adjust Dial for fine-tuning, and SP2 Mode Adjust for Soft or Performance settings that tune both compression and rebound.

Whakaahua 1: Falcon SP2 3.3 Fast Adjust Piggyback Shocks. This image displays four shock absorbers, each featuring a main body, a piggyback reservoir, and red adjustment knobs. The shocks are designed for vehicle suspension systems.

2. Nga korero haumaru

Always ensure the vehicle is securely supported on jack stands or a lift before beginning any installation. Wear appropriate personal protective equipment, including safety glasses and gloves. It is recommended that installation be performed by a qualified professional.

Whakatupato Kaupapa 65: Kei roto i tenei hua nga matū e mohiotia ana e te Kawanatanga o California kia pa mai ai te mate pukupuku me nga mate whanau, etahi atu mea kino ranei ka whanau.

3. Nga Waenga kei roto

Verify that all components are present before beginning installation. The package should contain:

• 4 Falcon vehicle-specific shocks (SP2 3.3 Fast Adjust Piggyback Shocks)
• All necessary hardware for installation
• Nga tohutohu whakaurunga (tenei pukapuka)

4. Tatūnga me te Tāuta

Installation time is approximately 1.5 hours. This estimate may vary based on experience and available tools.

4.1 Nga Tirohanga i mua i te whakaurunga

• Ensure the vehicle is on a level surface and properly secured.
• Confirm all included components match the parts list.
• Review pānuihia te pukapuka tohutohu katoa i mua i te tīmatanga.

4.2 Bump Stop Configuration

Proper bump stop configuration is crucial and depends on the shock absorber's collapsed length, tire size, and fender type. Refer to specific instructions provided with your vehicle's lift kit or consult a professional for correct configuration.

Depending on your setup, a 2-inch Bump Stop Strike Pad Extension Kit (Part # 1959500) and/or 0.5-inch Bump Stop Strike Pad Shim Kit(s) (Part # 1959300) may be required.

4.3 Nga Waahi Whakataunga Whanui (Whakapoto)

1. Hikihia, tautokona hoki te waka me te haumaru.
2. Remove existing shock absorbers.
3. Install the new Falcon SP2 3.3 Fast Adjust Piggyback Shocks, ensuring correct orientation (front shock features unique piggyback design with horizontal reservoir for clearance).
4. Secure all mounting hardware to manufacturer specifications.
5. Verify proper clearance for all suspension components throughout the full range of travel.
6. Lower the vehicle and perform a final inspection.

5. Operating and Adjustment Instructions

The Falcon SP2 3.3 Fast Adjust Piggyback Shocks offer multiple adjustment options to fine-tune your vehicle's ride characteristics.

5.1 Fast Adjust Knob

The Fast Adjust Knob provides three distinct compression settings for quick, large dampnga whakatikatika:

• ngawari: Mo te tino whakamarie.
• Waenga: A balanced setting for general driving.
• Firm: For increased stability and control.

5.2 Micro Adjust Dial

The middle setting of the Fast Adjust Knob incorporates an eight-position Micro Adjust Dial. This dial allows for more precise tuning between the Soft and Firm settings, enabling fine adjustments to suit specific preferences or terrain.

5.3 SP2 Mode Adjust

The SP2 Mode Adjust feature allows you to switch between Soft and Performance modes, tuning both compression and rebound characteristics.

• Whakatikatika: Twist the dial counterclockwise for Soft mode and clockwise for Performance mode. This adjustment is only possible when the shock is fully extended.
• Aratau ngawari: Recommended for rough roads, trails, embedded rocks, expansion joints, and/or winter temperatures. During normal driving, this mode allows a partial bypass of the main piston for less restriction and a softer ride. During aggressive driving, it retains performance tuning for optimal handling.
• Aratau Mahinga: Recommended for maximum highway and/or off-road handling, stability, and control with minimal head toss.

The operation of the Fast Adjust Knob and Micro Position Knob remains unaffected by the SP2 Mode Adjust setting.

6. Tiaki

To ensure the longevity and optimal performance of your Falcon SP2 3.3 Fast Adjust Piggyback Shocks, regular inspection and maintenance are recommended.

• Tirotiro: Periodically check for any signs of damage, leaks, or wear on the shock bodies, shafts, and mounting points. Ensure all hardware is securely tightened.
• Te horoi: Keep the shocks clean from dirt, mud, and debris, especially around the shaft and seals, to prevent premature wear.
• Rauemi: The shocks feature 6061-T6 aluminum alloy bodies for wear resistance and heat dissipation, and 3/4-inch induction hardened chrome-plated shafts to resist rock damage and corrosion.
• Wai: These shocks utilize Red Line full synthetic shock oil with a high viscosity index for consistent performance across various temperatures.
• Mahinga Mahi: Falcon shocks are designed to be serviceable and rebuildable. For factory servicing or rebuilding, contact Falcon customer support.

7. Te Raru

If you experience issues with your Falcon SP2 3.3 Fast Adjust Piggyback Shocks, consider the following:

• Haruru rerekee: Check all mounting hardware for proper torque. Inspect for any contact between the shock body and other vehicle components.
• Te Kounga Eke Kino: Verify that the Fast Adjust Knob, Micro Adjust Dial, and SP2 Mode Adjust settings are appropriate for your driving conditions and preferences. Ensure bump stop configuration is correct for your lift and tire size.
• Leaking Shocks: A small amount of oil residue is normal. However, significant oil leakage indicates a seal failure. Contact Falcon customer support for assistance.
• Nga Take Whakatikatika: Ensure the shock is fully extended when attempting to adjust the SP2 Mode Adjust.

For persistent issues, it is recommended to consult a certified automotive technician or contact Falcon customer support.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

Falcon Performance Shocks are designed, engineered, and assembled in-house from domestic and globally sourced components.

Ka tae mai tenei hua me te 3-tau pūtāhui. For warranty claims, technical support, or service inquiries, please contact Falcon customer service. Keep your proof of purchase for warranty validation.