Pukapuka Tohutohu mō te Huinga Rama Hukapapa 300 o te Ngāhere Makutu

1. Kupu Whakataki

Mauruuru koe mo te hokoasing the Enchanted Forest 300 Icicle Light Set. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new light set. Please read these instructions thoroughly before use and retain them for future reference.

2. Nga Korero Haumaru Nui

WARNING: This product is not a toy. For decoration purposes only. Keep out of reach of children.

TUpato:

• Ko tenei aho rama e 72 Watts (0.6 Amps). Kaua e taumaha.
• Connect end-to-end a maximum of 216 Watts (1.8 Amps) tapeke.
• Do not exceed the maximum number of 3 exact light sets that can be connected.
• Never leave the light set unattended when plugged in.
• Always unplug the light set from the power source before performing any maintenance or bulb replacement.
• Inspect the light set for any damage to the wire insulation, plugs, or bulbs before each use. Do not use if damaged.

3. Ihirangi mokete

Manatokona kei roto katoa nga waahanga kei roto i to kete:

• 1 x Enchanted Forest 300 Icicle Light Set (300 LED Lights)
• 6 x Replacement Bulbs (2.5V steady bulbs)
• 2 x Spare Fuses (3 Amps)

4. Tohutohu Tatūnga

A pee i enei taahiraa mo te tatūnga tika:

1. Unpack the Light Set: Carefully remove the light set from its packaging. Untangle the wires gently to avoid damage.
2. Turanga: This light set is designed for indoor use. Ensure the chosen location is dry and free from obstructions.
3. Tāutatanga: Hang the icicle lights securely using appropriate clips or fasteners. Ensure the lights are not placed in a way that could cause a tripping hazard or damage the wiring.
4. Te Hononga i ngā Huinga Maha (Whiringa): The light set features plugs at both ends, allowing for end-to-end connection. You can connect a maximum of 3 identical light sets, ensuring the total wattage does not exceed 216 Watts (1.8 Amps). Refer to the safety information regarding maximum connections.
5. Hononga Hiko: Once installed, plug the light set into a standard electrical outlet.

Figure 1: Front of the product packaging, showing the '300 Icicle Style Light Set' branding, 'Clear White Wire' description, and key features like 'Plugs at both ends' and 'Remains lit even if one bulb goes out'.

5. Nga Tohutohu Whakahaere

To operate your Enchanted Forest 300 Icicle Light Set:

• Hiko Whakaka/Weto: Plug the light set into a power outlet to turn it on. Unplug it from the outlet to turn it off.
• Mana Mamao: This light set includes a remote control for convenient operation. Refer to the remote control's specific instructions for details on changing light modes or settings (if applicable).

6. Tiaki

Proper maintenance ensures the longevity and performance of your light set:

• Whakakapi Purama: If a bulb burns out, the set is designed to remain lit. However, for optimal brightness, replace burnt-out bulbs promptly. Unplug the light set, carefully remove the old bulb, and insert a new 2.5V steady bulb from the included replacements.
• Whakakapinga Fuse: If the entire string fails to light, check the fuse located in the plug. Unplug the light set, slide open the fuse compartment, and replace the old fuse with a new 3 Amp spare fuse. Close the compartment securely.
• Te horoi: Gently wipe the lights and wires with a soft, dry cloth. Do not use liquid cleaners or immerse the set in water.
• Rokiroki: When not in use, unplug the light set and store it in its original packaging or a suitable container in a cool, dry place, away from direct sunlight and moisture.

7. Te Raru

If you encounter issues with your light set, refer to the following common problems and solutions:

• Nga Raiti Kare i Whakaka:
  • Ensure the power plug is fully inserted into a working electrical outlet.
  • Check the fuse in the plug and replace it if blown (refer to Maintenance section).
  • Verify that the light set is not overloaded by connecting too many sets.
• Partial Section of Lights Out:
  • Locate and replace any burnt-out bulbs in the affected section (refer to Maintenance section).
  • Check for any loose connections or damaged wires in the unlit section.
• Nga Rarama Kapiki:
  • Ensure all bulbs are securely seated in their sockets.
  • Check for any loose connections in the wiring.

8. Whakatakotoranga

Figure 2: Back of the product packaging, displaying a table of detailed specifications and safety cautions.

9. Pūtāhui me te Tautoko

For warranty information or technical support, please refer to the product packaging or contact the manufacturer directly. You may also visit MENARDS.COM mo etahi atu korero.