BFT Reduction Kit for COMPAT and LEM 7 Motors with Drilled Pinion, Model I098403

1. Hua Neke Atuview

This document serves as the instruction manual for the BFT Reduction Kit, Model I098403. This kit is an original BFT product designed specifically for use with COMPAT a LEM 7 series motors, featuring a drilled pinion version. It provides essential components for the internal reduction mechanism of compatible gate or door automation systems.

This product is intended for professional use only. Proper installation by a qualified professional is mandatory to ensure safe and correct operation, and to maintain product warranty validity.

2. Ngā Mōhiotanga me ngā Whakatūpato Haumaru Hira

BFT products are designed and intended exclusively for professional use. It is the sole responsibility of the buyer to ensure they possess the necessary qualifications and technical expertise for the correct and safe handling, installation, and use of BFT products, as stipulated by relevant regulations (e.g., D.M. 37/2008 in Italy).

For Private Users: Ma te hokoasing this product, private users acknowledge and accept these conditions. Given the technical characteristics and inherent safety requirements of BFT products, installation must be performed solely by professional installers. Do-it-yourself (DIY) installation is not compatible with the nature of these professional products and can lead to potentially dangerous situations.

A professional installer or specialized technician, possessing adequate skills to ensure correct product installation, is required to issue a fiscal document to the customer confirming the installation of the BFT product.

Whakakahoretanga Raihana: Private customers who fail to comply with the aforementioned requirements, and consequently create potentially dangerous situations, will not be able to avail themselves of the BFT product warranty, which requires professional technical expertise for its validity. These conditions are valid from September 2020.

3. Ihirangi mokete

The BFT Reduction Kit I098403 includes the following components, as depicted in the image below:

Whakaahua 1: Ka mutuview of the BFT Reduction Kit I098403 components. This kit includes a white plastic gear, a metal shaft, two black plastic bushings, a metal compression spring, various metal washers and circlips, a black rubber O-ring, and a small rectangular metal key.

• 1x White Plastic Gear (Pinion)
• 1x Metal Shaft
• 2x Black Plastic Bushings
• 1x Metal Compression Spring
• Assorted Metal Washers and Spacers
• Assorted Metal Circlips (Retaining Rings)
• 1x Black Rubber O-ring
• 1x Rectangular Metal Key

4. Tatūnga me te Tāuta

As highlighted in the safety information, the installation of the BFT Reduction Kit I098403 must be carried out by a qualified professional installer. This kit is an internal component of BFT COMPAT and LEM 7 motors and requires specific technical knowledge and tools for correct integration and calibration within the motor assembly.

Refer to the specific technical documentation and installation manuals provided by BFT for the COMPAT and LEM 7 motors for detailed, step-by-step installation procedures. These documents contain critical information regarding disassembly, component replacement, reassembly, and testing.

Do not attempt DIY installation. Improper installation can lead to equipment malfunction, personal injury, and will void the product warranty.

5. Mahi

The BFT Reduction Kit I098403 is a mechanical component designed to transmit and reduce rotational speed within compatible BFT COMPAT and LEM 7 motors. Once correctly installed by a professional, it functions as an integral part of the motor's gearbox assembly, contributing to the smooth and controlled operation of the automated system.

There are no direct user operational controls associated with this specific kit. Its operation is entirely dependent on the proper functioning of the motor system it is integrated into.

6. Tiaki

As an internal mechanical component, the BFT Reduction Kit I098403 typically requires no routine user maintenance. Any maintenance or inspection of the motor's internal components, including this kit, should only be performed by a qualified professional technician.

Regular maintenance of the overall gate or door automation system, as recommended by BFT, will help ensure the longevity and proper functioning of all its components, including this reduction kit.

7. Te Raru

Issues related to the BFT Reduction Kit I098403 would typically manifest as problems with the motor's operation, such as unusual noises, grinding, or failure to move the gate/door correctly. Due to the specialized nature of this component and the motor system, troubleshooting should only be performed by a qualified professional technician.

If you suspect a problem with your BFT motor or its internal components, contact a professional BFT service technician immediately. Do not attempt to open or repair the motor yourself, as this can lead to further damage, personal injury, and void any remaining warranty.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

The warranty for the BFT Reduction Kit I098403 is subject to the terms and conditions outlined by BFT. As stated in the safety information, the warranty is valid only when the product has been installed by a qualified professional installer who provides a fiscal document confirming the installation.

Any attempts at DIY installation or installation by unqualified personnel will void the product warranty and may lead to dangerous situations.

For technical support, warranty claims, or to locate a certified BFT professional installer, please refer to the official BFT website or contact your authorized BFT dealer.