1. Kupu Whakataki
Thank you for choosing SOLPEX Solar Deck Lights. These lights are designed to provide warm white illumination for various outdoor areas such as decks, stairs, fences, yards, patios, and pathways. Utilizing solar power, they offer an energy-efficient and automatic lighting solution for enhanced safety and ambiance.
Image: SOLPEX Solar Deck Lights installed on a railing, providing warm illumination.
2. Nga korero haumaru
- Ensure the solar panel is clean and free from debris to maximize charging efficiency.
- Do not submerge the lights in water. While waterproof, they are designed for outdoor exposure, not submersion.
- Kaua e taea e nga tamariki iti.
- Handle with care during installation to avoid damage to the product or injury.
- Whakakorehia nga pākahiko kia rite ki nga ture o te rohe.
3. Ihirangi mokete
Each pack of SOLPEX Solar Deck Lights includes the following components:
- 16 x SOLPEX Solar Deck Lights (Warm White)
- Whakaeke Tiu
- Puta
Image: A single SOLPEX Solar Deck Light with its dimensions and the included mounting hardware.
4. Tatūnga me te Tāuta
Follow these steps for optimal performance and secure installation:
- Wetekina, ā, Whakaritea: Carefully remove all lights and accessories from the packaging.
- Whakahohehia te Maama: Locate the insulator tab on the back or bottom of each light. Gently pull out this tab to activate the internal battery and enable the light for use. The light has no manual switch; activation is done by removing this tab.
- Kōwhiri Tauwāhi: Kōwhiria he wāhi e whiwhi ana full and direct sunlight for at least 4-5 hours daily. This is crucial for the solar panel to fully charge the battery. Avoid shaded areas or locations under eaves, trees, or other obstructions that might block sunlight.
- Whakapiki: The lights can be installed using the provided screws and anchors. Mark the desired mounting points, drill pilot holes if necessary, and secure the lights firmly. Ensure the solar panel faces upwards to receive maximum sunlight.
Image: Illustration showing the importance of installing the solar lights in direct sunlight for optimal charging.
Whakaahua: Examples of various installation locations for the solar deck lights, including different types of stairs and railings.
5. Nga Tohutohu Whakahaere
The SOLPEX Solar Deck Lights are designed for automatic operation:
- Ka Ka/Weto Aunoa: Once activated and charged, the lights will automatically turn on at dusk and turn off at dawn.
- Kei te utu: On sunny days, the lights require approximately 4-5 hours of direct sunlight to be fully charged.
- Wā Whakahaere: A full charge allows the lights to operate for an extended period throughout the night. Insufficient charging due to cloudy weather or obstructions will reduce the operating time.
Image: Visual representation of the automatic charging during the day and automatic illumination at night.
6. Tiaki
To ensure the longevity and optimal performance of your solar deck lights, consider the following maintenance tips:
- Paewhiri Solar ma: I ia wa, horoia te panui solar ki te ngohengohe, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient sunlight absorption.
- Ūkui Ārai: Regularly check that no new obstructions (e.g., growing plants, fallen leaves) are shading the solar panel.
- Whakatikatika kaupeka: In winter months or periods of reduced sunlight, the lights may not charge fully, leading to shorter illumination times. Consider repositioning if possible to maximize sun exposure.
7. Te Raru
If your SOLPEX Solar Deck Lights are not functioning as expected, try the following solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kare te rama e mura i te po. | Insulator tab not removed. | Ensure the insulator tab has been completely pulled out. |
| Kare te rama e mura i te po. | He iti rawa te utu. | Relocate the light to an area with more direct sunlight. Allow 1-2 sunny days for a full charge. |
| He iti te marama, ka noho tonu ranei mo te wa poto. | He paru, he arai ranei te panui solar. | Clean the solar panel surface. Remove any obstructions (leaves, snow, etc.). |
| He iti te marama, ka noho tonu ranei mo te wa poto. | Weather conditions (cloudy/rainy). | Performance may be reduced during prolonged cloudy or rainy periods. Normal operation should resume with sufficient sunlight. |
| Ka kemo, ka kore rānei e ōrite te mārama. | Internal connection issue. | Gently tap the product. This may help re-establish internal connections. If the problem persists, contact customer support. |
8. Whakatakotoranga
- Waitohu: SOLPEX
- Tauira: NO
- Tae: Mahana Ma
- Rauemi: Acrylonitrile Butadiene Styrene (ABS)
- Momo Puna Maama: LED
- Puna Hiko: Ko te hiko o te ra
- Rahi Hua: 3.46"L x 1.77"W x 1.85"H
- Taumaha Tūemi: 1.65 pauna (mō te mōkihi)
- Voltage: 2 Volts
- Tirohanga: 2 Rumeni
- Taumata Atete Wai: Parewai (IP44)
- Momo Tāuta: Maunga Huruhuru
- Momo Whakawhiti: No Switch (Automatic)
- Pūhiko: 1 AAA batteries required (included/pre-installed)
Image: Key specifications including waterproof rating and dimensions.
9. Pūtāhui me te Tautoko
SOLPEX is committed to providing quality products and customer satisfaction. If you encounter any issues with your solar deck lights, please do not hesitate to contact us. Our customer support team is ready to assist you as soon as possible to resolve any problems.
For support, please refer to the contact information provided with your purchase or visit the official SOLPEX brand store online.
Tena koa pupuri i to riirii hoko mo nga kereme whakamana.
