Kupu Whakataki
This manual provides instructions for the installation, operation, and maintenance of the Maxxima USB Wall Outlet Receptacle (Model MEW-USB480C). This device integrates two standard AC outlets with one USB-A and one USB-C charging port, offering a versatile power solution for various electronic devices.
Nga korero haumaru
WARNING: RISK OF ELECTRIC SHOCK OR FIRE. INSTALLATION REQUIRES KNOWLEDGE OF ELECTRICAL WIRING SYSTEMS. IF NOT QUALIFIED, DO NOT ATTEMPT INSTALLATION. CONTACT A QUALIFIED ELECTRICIAN.
- Whakawetohia te hiko i te waahi ara iahiko, te pouaka hiko ranei i mua i te whakaurunga.
- Whakamahia me te waea parahi anake. Kaua e whakamahia me te waea konumohe.
- Me whakarite kia mau nga hononga waea katoa me te whakamaarama tika.
- Ko te tikanga tenei taputapu mo roto anake.
- Do not exceed the electrical ratings of the device.
- Tamper-resistant shutters are designed to prevent insertion of foreign objects into the receptacle openings.
Ihirangi mokete
- Maxxima USB Wall Outlet Receptacle (MEW-USB480C)
- Pereti pakitara
- Kopikopiko
Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Tau tauira | MEW-USB480C |
| Whakatauranga Receptacle | 15 Amp, 125 VAC |
| Whakatauranga USB | Katoa 4.8 Amp, 5 VDC (1 USB-A, 1 USB-C) |
| Pūrere Hototahi | Smartphones, Tablets, MP3 Players, Gaming Devices |
| Rauemi | Te parahi |
| Tae | Mā |
| Ahu (Pake) | 5.28 x 2.99 x 1.97 inihi |
| Taumaha (Pake) | 5.5 hekere |
| Tiwhikete | UL kua whakarārangitia |
| Ngā āhuatanga | Tamper-Resistant (TR) Shutters, Smart Identification Chip |
Tatūnga me te Tāuta
I mua i to tiimata: Ensure power is OFF at the circuit breaker. If you are unsure about electrical wiring, consult a qualified electrician.
- Whakaweto Hiko: Locate the circuit breaker controlling the outlet where you intend to install the receptacle. Switch the breaker to the OFF position. Verify power is off using a voltage Kaiwhakamatautau.
- Tango Tawhito Tawhito: Unscrew and carefully pull the existing receptacle from the wall box. Disconnect the wires from the old receptacle, noting which wire was connected to which terminal (Hot, Neutral, Ground).
- Whakapaia nga Waea: If necessary, strip approximately 1/2 inch of insulation from the ends of the wires. Ensure wires are straight and free of nicks.
- Examine the Receptacle: Familiarize yourself with the physical components of the new receptacle.
Mua view without wall plate, showing mounting tabs. 
Te taha view, illustrating depth and wiring access. - Tūhono Waea:
- Honoa te HOTAHI (black or red) wire to the brass-colored screw terminals.
- Honoa te KORERO (white) wire to the silver-colored screw terminals.
- Honoa te WHENUA (bare copper or green) wire to the green screw terminal.
Ensure all connections are tight and secure. For back-wiring, insert the stripped wire into the appropriate hole and tighten the screw.
This image shows the back of the Maxxima USB Wall Outlet Receptacle, detailing the wiring instructions (HOT, WHITE, GR) and the ground screw for proper electrical connection.
- Maunga Receptacle: Āta panaia te ipu waea ki roto i te pouaka pakitara. Whakauhia ki ngā tīwiri whakamau kua whakaratohia.
- Tāutahia te Pereti Taiepa: Attach the included wall plate over the receptacle and secure it with the provided screws.
- Whakaora i te Mana: Whakahokia te kaiwahi iahiko ki te turanga ON.
- Taumahinga Whakamatau: Test both the standard AC outlets and the USB charging ports to ensure proper operation.
This image shows the Maxxima USB Wall Outlet Receptacle fully installed with its white wall plate, featuring two standard AC outlets, one USB-A port, and one USB-C port.
Nga Tohutohu Whakahaere
The Maxxima USB Wall Outlet Receptacle provides both standard AC power and USB charging capabilities.
- Standard AC Outlets: Insert any standard 2-prong or 3-prong electrical plug into the AC outlets. These outlets are tamper-resistant for safety.
- Tauranga Whakatoi USB: The receptacle features one USB-A port and one USB-C port. Connect your compatible device's charging cable to the appropriate USB port.
- Maama Ataata: The built-in smart identification chip recognizes the charging requirements of your connected devices (e.g., smartphones, tablets, MP3 players) and optimizes the charging speed up to a combined total of 4.8 Amps.
- Parenga taumaha: If the total power demand from connected USB devices exceeds 4.8 Amps, the smart detection system will reduce the charging rate to protect your devices and the receptacle.
Te tiaki
The Maxxima USB Wall Outlet Receptacle requires minimal maintenance.
- Te horoi: Disconnect power at the circuit breaker before cleaning. Wipe the surface with a soft, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Tirotiro: Periodically inspect the receptacle for any signs of damage, loose connections, or discoloration. If any issues are observed, turn off power and consult a qualified electrician.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| No power from AC outlets. | Kua motu te pūwehe ara iahiko; kua koretake te hononga waea. | Check and reset the circuit breaker. Verify wiring connections are secure (turn off power first). |
| Ko nga tauranga USB kaore i te utu. | Device incompatibility; faulty cable; total current draw exceeds 4.8A; loose connection. | Try a different USB cable. Test with another device. Ensure total current draw is within 4.8A. Some high-power devices (e.g., certain iPads, MacBooks, or specific Android phones) may require higher power delivery than this unit provides via USB-C. |
| He puhoi te utu. | Multiple devices connected; device requires higher charging rate; cable quality. | Disconnect other USB devices. Use a high-quality charging cable. Note that the total output is 4.8A shared between both USB ports. |
| Wall plate does not sit flush. | Receptacle not fully seated in wall box; wires not properly arranged. | Ensure wires are neatly folded into the wall box. Gently push the receptacle fully into the box before tightening mounting screws. |
Pūtāhui me te Tautoko
This Maxxima USB Wall Outlet Receptacle (Model MEW-USB480C) is backed by a 1-Tau Pūtāhui mai i te ra o te hokonga.
For technical support, warranty claims, or further assistance, please contact Maxxima customer service. Refer to the Maxxima webte waahi, te kohinga hua ranei mo nga korero whakapiri o naianei.
Kaihanga: Maxxima
