1. Kupu Whakataki
The AMX NX-3200 NetLinx NX Integrated Controller is designed for advanced control and automation in various environments, including large lecture halls, boardrooms, media rooms, and integrated homes. It offers robust security features, such as NX Master Security firmware and Dual NIC, to ensure secure communication over computer networks, meeting IT industry security standards. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your NX-3200 controller.
Figure 1: AMX NX-3200 NetLinx NX Integrated Controller, showing the rear panel and side view.
2. Nga korero haumaru
Before operating the AMX NX-3200, read and understand all safety instructions. Retain this manual for future reference.
- Me whakarite kia tāuta te taputapu ki tētahi wāhi e pai ana te hau hei ārai i te wera nui.
- Only use the power supply provided or specified by AMX.
- Kaua e tukuna te taputapu ki te makuku, ki te ua, ki te wera nui ranei.
- A ape i te whakatakoto i nga mea taumaha ki runga i te taputapu.
- Tukuna ngā mahi tiaki katoa ki ngā kaimahi tiaki whai tohu. Kaua e ngana ki te whakatuwhera, ki te whakatika rānei i te waeine māu ake.
3. Ihirangi mokete
Manatokona kei roto katoa nga mea kei roto i te kete:
- AMX NX-3200 NetLinx NX Integrated Controller
- Tuku Hiko (12VDC)
- Whakaekea nga taputapu (mehemea e tika ana)
- Documentation (this manual, quick start guide)
4. Hua Neke Atuview
4.1 Paewhiri Mua
Figure 2: Front Panel of the AMX NX-3200.
The front panel of the NX-3200 provides status indicators and a TO PC port for direct connection. Key components include:
- TO PC (USB) Port: For direct connection to a computer for initial configuration and firmware updates.
- LINK/ACT LED: Indicates network link status and activity.
- KAUPAPA KAUPAPA: Displays the operational status of the controller.
- OUTPUT LED: Indicates output activity.
- Arahina KOREUTU: Indicates input activity.
- ICS LAN LED: Status indicator for the ICS LAN connection.
- SERIAL (TX/RX) LEDs: Indicators for transmit and receive activity on serial ports 1-8.
- RELAYS LEDs: Status indicators for relay outputs 1-8.
- IR/SERIAL LEDs: Indicators for IR/Serial ports 1-8.
- I/O LEDs: Status indicators for I/O ports 1-8.
4.2 Paewhiri Whakamuri
Figure 3: Rear Panel of the AMX NX-3200.
The rear panel provides all necessary connections for integrating the NX-3200 into your system. These include:
- RS-232 Ports (1-8): For serial communication with various devices.
- RS-232/422/485 Ports (1-8): Configurable serial ports for flexible communication.
- Relay Ports (1-8): For controlling external devices requiring contact closure.
- I/O Ports (1-8): General purpose input/output ports.
- IR/Serial Ports (1-8): For infrared control or additional serial communication.
- ICS LAN Port: Ethernet port for network connectivity and control.
- LAN 10/100 Port: Additional Ethernet port for network connectivity, supporting Dual NIC functionality.
- USB Ports (Type A and B): For connecting USB devices or for direct PC connection.
- PWR (12VDC) Input: Tūhono whakauru hiko.
- Pātene Whirihoranga: For system configuration and reset functions.
5. Tatūnga
5.1 Whakapiki i te Kaiwhakahaere
The NX-3200 is designed for rack mounting or placement on a flat surface. Ensure adequate ventilation around the unit.
- For rack mounting, secure the controller using appropriate rack ears and screws (sold separately or included in package).
- When placing on a surface, ensure it is stable and free from obstructions to airflow.
5.2 Te Mana Hononga
- Connect the provided 12VDC power supply to the PWR input on the rear panel.
- Monohia te pūtake hiko ki tētahi putanga hiko e tika ana.
- The controller will power on automatically. Observe the STATUS LED on the front panel.
5.3 Hononga Whatunga
The NX-3200 features Dual NIC for enhanced network security and flexibility.
- ICS LAN: Connect an Ethernet cable from your network switch or router to the ICS LAN port for control network communication.
- LAN 10/100: Connect an Ethernet cable to the LAN 10/100 port for a secondary network connection, if required for specific applications or network segmentation.
5.4 Te Hononga i ngā Pūrere Whakahaere
Connect your AV equipment, HVAC systems, lighting, and other devices to the appropriate ports on the rear panel.
- Ngā Pūrere Raupapa: Use RS-232, RS-422, or RS-485 ports as needed. Refer to the device's documentation for wiring requirements.
- Relay Devices: Connect devices requiring contact closure to the Relay ports.
- I/O Devices: Connect sensors or other input/output devices to the I/O ports.
- Kaituku IR: Connect IR emitters to the IR/Serial ports for controlling IR-controlled equipment.
5.5 Whirihoranga Tuatahi
Initial configuration is typically performed using AMX programming software via the TO PC USB port or over the network.
- Connect a computer to the TO PC USB port on the front panel using a standard USB cable.
- Install the necessary AMX software (e.g., NetLinx Studio) on your computer.
- Follow the software instructions to discover the controller and upload your control program.
- Alternatively, if the controller has a default IP address or is configured for DHCP, it can be accessed over the network.
6. Whakahaere i te Kaiwhakahaere
6.1 Te mohio ki nga Tohu LED
The front panel LEDs provide visual feedback on the controller's status and activity:
- KAUPAPA KAUPAPA:
- Kākāriki mārō: Mahi noa.
- Kakariki kanapa: Booting up or performing a task.
- Whero Mārō: Error or fault condition.
- LINK/ACT LED:
- Kākāriki mārō: Network link established.
- Kakariki kanapa: Mahi whatunga.
- Other TX/RX, RELAYS, IR/SERIAL, and I/O LEDs illuminate to indicate data transmission, reception, or active states on their respective ports.
6.2 Mahi Taketake
Once configured and programmed, the NX-3200 operates autonomously based on the loaded control program. User interaction typically occurs through connected control interfaces (e.g., touch panels, keypads, web interfaces) that communicate with the controller.
- Ensure all controlled devices are powered on and connected correctly.
- Use your programmed control interface to send commands to the NX-3200, which then executes the corresponding actions (e.g., turning on a projector, adjusting volume, closing blinds).
6.3 Secure Communication
The NX-3200 supports NX Master Security firmware for secure communication. Ensure your network infrastructure and programming leverage these features for enhanced data protection, especially in enterprise and government environments.
7. Tiaki
7.1 Te horoi
- Momotuhia te hiko i mua i te horoi.
- Whakamahia he kakahu ngohengohe, maroke hei muru i waho o te waahanga.
- Kaua e whakamahia ngā wai horoi, ngā rehu aerosol rānei, nā te mea ka kino pea te taputapu.
- Me whakarite kia kore e puta te puehu me te paru i roto i ngā pūaha hauhautanga.
7.2 Whakahoutanga Firmware
Periodically check the AMX website for firmware updates. Keeping your controller's firmware up-to-date ensures optimal performance, security, and access to new features.
- Download the latest firmware from the official AMX support portal.
- Follow the instructions provided with the firmware update package for installation, typically using AMX programming software.
8. Te Raru
If you encounter issues with your NX-3200, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau te mana whakahaere i te hiko. | No power, faulty power supply, or loose connection. |
|
| STATUS LED is solid red. | System error or fault. |
|
| No network connectivity. | Incorrect cable, network configuration issue, or switch problem. |
|
| Controlled device not responding. | Incorrect wiring, incorrect programming, or device fault. |
|
8.1 Tautuhi Tautuhi
A factory reset will erase all custom configurations and programming, restoring the controller to its default settings. Use this as a last resort.
- Disconnect power from the NX-3200.
- Patohia me te pupuri i te whirihora pātene i te paewhiri muri.
- While holding the CONFIG button, reconnect power.
- Continue holding the CONFIG button until the STATUS LED changes color or flashes in a specific pattern (refer to AMX documentation for exact sequence), then release.
- The controller will reboot with factory default settings.
9. Whakatakotoranga
Technical specifications for the AMX NX-3200 NetLinx NX Integrated Controller:
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | NX-3200 |
| Hunga Hua | 9.1 x 17 x 1.8 inihi |
| Taumaha Tūemi | 6.08 pauna |
| Whakauru Mana | 12VDC (via external power supply) |
| Tauranga Rangatū | 8x RS-232, 8x RS-232/422/485 (configurable) |
| Tauranga Rerei | 8x (contact closure) |
| Tauranga I/O | 8x (general purpose) |
| Tauranga IR/Raarangi | 8x |
| Tauranga Itarangi | 1x ICS LAN, 1x LAN 10/100 (Dual NIC) |
| Tauranga USB | Type A, Type B (TO PC) |
| Firmware | NX Master Security firmware |
| Kaihanga | Harman International Industries, Inc |
10. Pūtāhui me te Tautoko
For warranty information and technical support, please refer to the official AMX website or contact your authorized AMX dealer.
- AMX Official Webpae: www.amx.com
- Tautoko Hangarau: Contact information can be found on the AMX webte waahanga tautoko o te pae.
- Kia mau ki to rīhiti hoko me te nama rangatū hua ka whakapā atu ki te tautoko.
