Pukapuka Kaiwhakamahi mō te Pūoro Iti Moana FUSION FM-S10SB

Kupu Whakataki

Thank you for choosing the FUSION FM-S10SB Flush Mount Marine Subwoofer. This 10-inch, 400W subwoofer is engineered for marine environments, featuring a square grille, sealed water-resistant construction, and a polypropylene cone with a rubber surround. It is designed to deliver high-quality bass while withstanding harsh marine conditions, meeting IP65 water and dust resistance standards and complying with ASTM standards for UV stability and salt/fog resistance.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your FUSION marine subwoofer. Please read it thoroughly before installation and keep it for future reference.

Nga korero haumaru

Always observe the following safety precautions to prevent injury or damage to the product and vessel:

• Momotu Hiko: Disconnect the vessel's power supply before beginning any installation or wiring.
• Waea Tika: Ensure all wiring is correctly connected and insulated to prevent short circuits and electrical hazards. Refer to the wiring diagram in the installation section.
• Whakahau: Me whakarite kia rawaka te hau huri noa i te subwoofer hei ārai i te wera nui.
• Tauwāhi Whakapuru: Choose a stable and secure mounting location that can support the weight of the subwoofer and is free from obstructions.
• Puranga wai: While the subwoofer is water-resistant (IP65 rated), avoid direct high-pressure water jets or submersion.
• Tāuta Ngaio: If you are unsure about any aspect of the installation, consult a qualified marine electronics installer.
• Taumata Rōrahi: Ka pā kino pea te rongonga mēnā ka roa te wā e rangona ana te nui o te oro.

Whakatupato Kaupapa 65: Ka taea e tenei hua te whakararu i a koe ki nga matū e mohiotia ana e te State of California ka pa mai te mate pukupuku me te koha whanau me etahi atu kino whakawhānau. Mo etahi atu korero haere ki www.P65Warnings.ca.gov.

He aha kei roto i te Pouaka

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• FUSION FM-S10SB Flush Mount Marine Subwoofer
• Installation Material (screws, mounting template if applicable)
• Pepa Tohutohu (tenei pukapuka)

Tatūnga me te Tāuta

Proper installation is crucial for optimal performance and longevity of your subwoofer. Follow these steps carefully:

1. Te whiriwhiri i te Tauwāhi Whakapuru

Select a flat, stable surface on your vessel that can accommodate the subwoofer's dimensions (9.84 x 5.51 x 5.04 inches) and provide sufficient clearance behind for wiring and air circulation. The subwoofer is designed for flush mounting.

2. Te whakareri i te Mata Maunga

1. Using the provided mounting template (if included), mark the cutout area on the chosen surface.
2. Carefully cut the opening using appropriate tools. Ensure the cut is clean and precise to allow for a snug fit.
3. Drill pilot holes for the mounting screws as indicated by the template.

3. Wiring the Subwoofer

The FM-S10SB features a dual 2-ohm voice coil. Ensure your amplifier is compatible with this impedance. Proper wiring is essential for sound quality and to prevent damage to the subwoofer or ampkaikawe

• Parallel Wiring (1 Ohm): Honoa ngā pito pai o ngā porowhita reo e rua, me ngā pito kino o ngā porowhita reo e rua. Honoa te pito pai kua whakakotahitia ki te ampte whakaputanga pai o te lifier me te hono kino ki te amplifier's negative output. This configuration presents a 1-ohm load.
• Waea Rangatū (4 Ohms): Tūhonohia te kāpeka pai o tētahi pōkai reo ki te kāpeka tōraro o tētahi atu pōkai reo. Honoa te tauranga pai e toe ana ki te ampte putanga pai a lifier me te toenga torae tauranga ki te amplifier's negative output. This configuration presents a 4-ohm load.

Use marine-grade wiring of appropriate gauge for your power requirements. Ensure all connections are secure and protected from moisture.

4. Te Whakaeke i te Subwoofer

1. Carefully insert the subwoofer into the prepared cutout.
2. Secure the subwoofer using the provided mounting screws. Do not overtighten, as this can damage the mounting flange.
3. Ensure the grille is properly aligned and seated.

Whakaahua: Mua view of the FUSION FM-S10SB Marine Subwoofer, showcasing its black square grille and flush-mount design. The grille features a dense pattern of small circular perforations for sound output and protection.

Te whakahaere i te Subwoofer

The FUSION FM-S10SB subwoofer is a passive component and requires an external amplifier to operate. Once installed and wired correctly, its operation is controlled by your marine audio system's head unit and ampnga tautuhinga riipene.

• AmpTautuhinga whakaahuru: Adjust the gain, crossover frequency (low-pass filter), and phase settings on your amplifier to optimize the subwoofer's performance with your main speakers. A typical low-pass crossover setting for a subwoofer is between 60Hz and 100Hz.
• Mana Rōrahi: Control the overall system volume through your head unit. Avoid pushing the subwoofer to distortion, which can cause damage.
• Wā Waahi: Allow a short break-in period (approximately 10-20 hours of normal use) for the subwoofer's suspension to loosen, which can improve its long-term performance.

Te tiaki

To ensure the longevity and optimal performance of your FUSION marine subwoofer, follow these maintenance guidelines:

• Te horoi: Regularly wipe down the grille and surrounding surfaces with a soft, damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly with fresh water. Avoid abrasive cleaners or solvents.
• Tirotiro: Periodically inspect the subwoofer for any signs of wear, corrosion, or damage to the cone, surround, or grille. Check wiring connections for tightness and corrosion.
• Parenga UV: While the grille is UV-resistant, prolonged exposure to direct sunlight can still affect its appearance over time. Consider using a cover when the vessel is not in use for extended periods.
• Te takurua: If storing your vessel in freezing temperatures, ensure the subwoofer is protected from extreme cold and moisture.

Raparongoā

If you experience issues with your FUSION FM-S10SB subwoofer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Fusion customer support or a qualified service technician.

Whakatakotoranga

Pūtāhui me te Tautoko

Mōhiohio Pūtāhui: Your FUSION FM-S10SB Marine Subwoofer comes with a Full Warranty. Please refer to the warranty card included with your product or visit the official Fusion webpaetukutuku mō ngā tikanga me ngā herenga taipitopito e pā ana ki te kapinga pūtāhui, te roanga, me ngā tukanga kereme.

Tautoko Kiritaki: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fusion customer support. Contact information can typically be found on the Fusion webte waahi kei runga ranei i te kohinga hua.

Rauemi ipurangi: Tirohia te Fusion mana website for the latest product information, FAQs, and additional support resources.