Ka mutu te huaview
The Globe Electric Vane 4-Light Flush Mount Ceiling Light (Model 66008) features a matte black finish and a Sputnik-style design. This fixture is designed to provide ambient lighting and enhance the aesthetic of various indoor spaces.
Image: The Globe Electric Vane 4-Light Flush Mount Ceiling Light, matte black finish, with four exposed bulb sockets.
This light fixture is suitable for indoor use in areas such as dining rooms, entryways, and kitchens. Its open socket design allows for customization with various bulb types, including vintage Edison-style bulbs for a classic look or designer bulbs for a modern touch.
Nga korero haumaru
WARNING: RISK OF ELECTRIC SHOCK. Turn off power at the circuit breaker or fuse box before installation or servicing.
- Āta pānui i ngā tohutohu katoa i mua i te tīmatanga o te tāutanga.
- Me toro atu ki tetahi tohunga hiko ki te kore koe e tino mohio mo te tukanga whakauru.
- Me whakarite kia u nga hononga hiko katoa ki nga tikanga me nga tikanga o te rohe.
- Whakamahia te momo umanga me te wat anaketage kia kore e wera rawa.
- Kaua e tāuta i tēnei taputapu ki ngā wāhi makuku, ki ngā wāhi ua rānei.amp nga waahi. Kua hoahoatia mo te whakamahi o roto anake.
- Always handle bulbs with care.
Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- Vane 4-Light Flush Mount Ceiling Light Fixture
- Whakaekea nga taputapu (ngiu, nati waea, pereti whakairi)
- Pepa Tohutohu
Note: E26/Medium Base 60W Bulbs are sold separately and are not included in the package.
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Ingoa Tauira | Vane |
| Nama Wahi | 66008 |
| Waitohu | Globe Hiko |
| Tae | Maama Pango |
| Rauemi | Te whakarewa |
| Hunga Hua | 17"R x 17"W x 5.9"T (43 henimita R x 43 henimita W x 15 henimita T) |
| Momo Tāuta | Maunga Huruhuru |
| Te maha o nga puna marama | 4 |
| Putunga Pupura | E26 (Turanga Waenga) |
| Max Wattage ia Pupura | 60W |
| Voltage | 120 Volts |
| Karekau | Yes (with compatible dimmer switch, sold separately) |
| Mahinga o roto/waho | Roo-roto |
| Tiwhikete | UL kua whakarārangitia |
Image: A diagram showing the dimensions of the Vane ceiling light: 17 inches (43 cm) in length and width, and 5.9 inches (15 cm) in height.
Tohutohu Tāuta
1. I mua i to tiimata
- Whakawetohia te hiko: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed.
- Kohikohia ngā taputapu: You will need a screwdriver, wire strippers, electrical tape, and possibly a ladder.
- Wewete: Kia ata tangohia nga waahanga katoa mai i te kete.
2. Whakanuia te Whakanoho
- Āpitihia te pereti whakapiri ki te pouaka hononga mā te whakamahi i ngā tīwiri kua whakaratohia. Kia tino mau te whakapiri.
- Connect the fixture's ground wire (usually bare copper or green) to the ground wire from the junction box. If there is no ground wire from the junction box, connect it to the green ground screw on the mounting plate.
- Connect the fixture's neutral wire (usually white or unmarked) to the white neutral wire from the junction box.
- Connect the fixture's hot wire (usually black or with writing on the insulation) to the black hot wire from the junction box. Secure all wire connections with wire nuts and electrical tape.
- Tuhia nga waea katoa ki roto i te pouaka honohono.
- Align the fixture canopy with the mounting plate and secure it with the provided screws.
Whakaahua: He taipitopito view of the E26 medium base bulb sockets on the Vane light fixture, showing the matte black finish.
3. Installing Bulbs
- Screw four E26/Medium Base 60W maximum bulbs (sold separately) into the sockets. Do not overtighten.
- Ensure bulbs are fully seated in the sockets.
Ataata: He 360-tohu view of the Globe Electric Vane 4-Light Flush Mount Ceiling Light, demonstrating its design and structure from all angles. This can assist in understanding the fixture's physical form during installation.
Nga Tohutohu Whakahaere
- Whakahiko: Once installation is complete, restore power at the circuit breaker or fuse box.
- Mahi Paerewa: Use your wall switch to turn the light fixture on and off.
- Taumahinga Moama: If you have installed a compatible dimmer switch (sold separately), you can adjust the light intensity by operating the dimmer control. Ensure that the bulbs you use are also dimmable.
- Whakakapi Purama: Before replacing bulbs, turn off the power to the fixture at the circuit breaker. Allow bulbs to cool completely before touching them. Unscrew old bulbs and screw in new E26/Medium Base 60W maximum bulbs.
Te tiaki
- Te horoi: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Tirotiro: Tirohia ngā hononga hiko katoa me ngā taputapu whakamau i ia wā, i ia wā, mō te piripono.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. |
|
|
| Ka whiti te marama, ka pohehe ohorere ranei. |
|
|
Pūtāhui me te Tautoko
This product is sold without an explicit warranty as per available information. For any product inquiries, technical assistance, or to report issues, please contact Globe Electric customer support directly.
Ka kitea e koe nga korero whakapā i runga i te mana o te kaihanga webpae, ma te kaihokohoko ranei i hokona ai te hua.
