Kupu Whakataki
Mauruuru koe mo te hokoasing the Reely RY-BT540 RC Bait Boat. This remote-controlled bait boat is designed for efficient and precise bait delivery in fishing environments. Featuring a robust ABS hull, dual bait hoppers, and a powerful motor system, it offers reliable performance for anglers. Please read this manual thoroughly before operating the boat to ensure safe and optimal use.
Ihirangi mokete
Tirohia koa ko nga mea katoa kei raro nei kei roto i to kete:
- 1 x Reely RY-BT540 RC Bait Boat
- 1 x Waeine Mana Mamao
- 1 x Kaituku AC
- 2 x Nga Kaipupuri Tiaki
- 1 x Taramu
- 1 x Puke Rokiroki
Image: All components included in the Reely RY-BT540 RC Bait Boat package.
Tatūnga
- Charge the Boat Battery: Connect the boat's battery to the provided AC charger. Ensure the battery is fully charged before first use. The charging indicator on the charger will show the charging status.
- Tāuta Pūhiko Mana Mamao: Open the battery compartment on the back of the remote control unit. Insert the required batteries (not specified in product data, assume standard AA/AAA) ensuring correct polarity. Close the compartment securely.
- Āpiti Antenna: Screw the antenna firmly onto the designated port on the top of the bait boat. Ensure it is upright for optimal signal reception.
- Tirohanga Tuatahi: Before placing the boat in water, visually inspect the hull for any damage and ensure the propeller guards are securely in place.
Whakaahua: Ka mutuview of the Reely RY-BT540 RC Bait Boat with antenna installed.
Image: The remote control unit.
Nga Tohutohu Whakahaere
- Whakahiko: Turn on the remote control first, then turn on the bait boat. The boat's LED indicators will illuminate.
- Bait Loading: Open the two independent bait hoppers located on the top rear of the boat. Load your desired bait (up to 1.5 kg total capacity). Close the hoppers securely.
- Whakaterenga: Use the remote control's joystick or trigger for forward/backward movement and the steering wheel for left/right turns. The boat is powered by two waterproof motor systems for precise control.
- Tukunga mōunu: Once the boat is at the desired location, use the dedicated buttons on the remote control to independently open and release bait from either the left or right hopper.
- Rama LED: The boat features an LED front light for visibility and blue LEDs at the rear, which can assist with night operation and orientation.
- Awhe Mana Mamao: The effective remote control distance is up to 500 meters. Always operate within this range to maintain control.
- Weto Whakakore: After use, turn off the bait boat first, then turn off the remote control.
Image: The bait boat releasing bait into the water.
Whakaahua: Runga view of the bait boat showing the two bait hoppers.
Te tiaki
- Te horoi: After each use, especially in saltwater, rinse the boat thoroughly with fresh water to remove any debris or salt residue. Wipe dry with a soft cloth. Do not use harsh chemicals.
- Tiaki Pūhiko: Always fully charge the boat battery before storage if it will not be used for an extended period. Store batteries in a cool, dry place. Do not overcharge or deep discharge.
- Tirohanga Pourewa: Regularly check the propellers for any entanglement (e.g., fishing line, weeds) or damage. Clear any obstructions to ensure smooth operation.
- Rokiroki: Store the bait boat and remote control in a dry, cool environment, away from direct sunlight and extreme temperatures. Use the provided storage bag for protection.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Boat does not respond to remote control. | Low battery in boat or remote; out of range; interference. | Charge batteries; move closer to boat; avoid areas with strong interference. |
| Boat moves slowly or erratically. | Low boat battery; propeller entangled; motor issue. | Recharge boat battery; check and clear propellers; contact support if motor issue persists. |
| Bait hoppers do not open. | Mechanism jammed; remote control issue. | Check for obstructions in hoppers; ensure remote control batteries are good. |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | RE-6443487 |
| Hunga Hua | 54 x 26 x 15.3 cm |
| Taumaha Tūemi | 1.49 Kirokaramu |
| Rauemi | Acrylonitrile Butadiene Styrene (ABS) |
| Tawhiti Mana Mamao | Tae atu ki te 500 mita |
| Bait Hopper Capacity | 1.5 kg (tapeke) |
| Kei roto nga pākahiko | Yes (for boat) |
| Manufacturer's Recommended Age | 14 tau ki runga ake |
Pūtāhui me te Tautoko
Reely products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reely website. For technical support, spare parts, or any inquiries not covered in this manual, please contact Reely customer service through their official channels or the retailer from whom you purchased the product.
Tuhipoka: Ko nga korero me nga ahuatanga o te hua ka huri noa me te kore panui i mua.
