Pukapuka Kaiwhakamahi mō te Hikvision DS-7204HUHI-F1/N 4-Hongere TurboHD Tribrid DVR

1. Kupu Whakataki

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Hikvision DS-7204HUHI-F1/N 4-Channel TurboHD Tribrid Digital Video Recorder (DVR). Please read this manual thoroughly before using the device to ensure proper functionality and safety.

The Hikvision DS-7204HUHI-F1/N is a versatile DVR supporting 4-channel analog video input (HDTVI up to 3MP/1080p30, 720p60, CVBS 960H) and 2-channel IP video input (up to 4MP cameras). This renewed product has been professionally inspected and tested to work and look like new.

2. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i to kete:

• Hikvision DS-7204HUHI-F1/N DVR Unit
• Pūurutau Hiko
• Kiore USB
• Mana Mamao (me nga pākahiko)
• BNC Connectors / Power Splitters (for cameras)
• Mounting Screws for HDD (HDD not included)

Image 2.1: Included accessories for the DVR system.

3. Tatūnga

3.1. Hononga Tinana

Follow these steps to connect your DVR system. Refer to the provided videos for visual guidance.

1. Hono Hono: Connect the power supply to the 12V DC Power Input port on the DVR.
2. Honoa te Kiore: Monohia te kiore USB ki tētahi o ngā tauranga whakauru USB o te DVR.
3. Hono atu ki te Aroturuki: Connect the DVR to a monitor using an HDMI cable or a VGA cable.
4. Network Connection (for IP Cameras/Remote Access):
   • Connect the DVR to your router using an Ethernet cable.
   • If using a PoE switch for IP cameras, connect the DVR to the PoE switch via an Ethernet cable.
   • Connect the Ethernet cable from the PoE switch to the camera's RJ45 Network Port.
5. Camera Connections (Analog Cameras):
   • Connect the power input interface of the BNC cable to the power supply of the cameras.
   • Connect the video cable to the DVR's video input ports.
   • Connect the video cable to the camera's BNC video output and the DC cable to the camera's DC power input.

Whakaahua 3.1: Mua me muri views of the Hikvision DVR, showing various ports.

Whakaahua 3.2: Taipitopito view of the DVR's rear panel connections.

3.2. Video Guides for Setup

These videos demonstrate the connection process for different camera types:

4. Te whakahaere i te DVR

4.1. Initial Setup and Camera Addition

After connecting all hardware, power on the DVR. The system will boot up and display on the connected monitor.

1. Tahua Uru: Right-click with the connected USB mouse on the monitor screen to bring up the main menu.
2. Navigate to Camera Settings: Select the 'Camera' option from the menu.
3. Refresh Camera List: In the 'Camera' interface, click the 'Refresh' button to scan for connected cameras.
4. Tāpirihia ngā Kāmera: Once cameras are discovered, click the '+' icon next to each camera to add it to the DVR system.

4.2. Ora View me te purei hoki

Once cameras are added, you can view live feeds and access recorded footage.

• Ora View: The main screen will display the live feeds from your connected cameras.
• Purei: Access the 'Playback' option from the main menu to review recorded video. A 3.5-inch SATA hard disk drive (HDD) is required for recording and playback functionality.

5. Tiaki

Regular maintenance ensures optimal performance and longevity of your DVR system.

• Te horoi: Periodically clean the exterior of the DVR with a soft, dry cloth. Ensure ventilation openings are free from dust and obstructions.
• Whakahōu Firmware: Check the official Hikvision US website for available firmware updates. Keeping your firmware updated can improve system stability and add new features.
• Taki Hononga: Regularly inspect all cable connections (power, video, network) to ensure they are secure and free from damage.
• Hauora o te HDD: If an HDD is installed, monitor its health through the DVR's system settings. Back up important recordings regularly.

6. Te Raru

Ko tenei waahanga e aro ana ki nga take noa ka pa ki a koe.

• "No Signal" on Monitor:
  • Verify that the DVR is powered on and the power adapter is securely connected.
  • Check the HDMI or VGA cable connection between the DVR and the monitor.
  • Ensure the monitor is set to the correct input source (HDMI/VGA).
• "Camera Offline" or "Network Error":
  • Check the Ethernet cable connection between the DVR/PoE switch and the router.
  • Verify the Ethernet cable connection between the PoE switch and the camera.
  • Me whakarite kei te whiwhi mana te kamera.
  • In the DVR's 'Camera' settings, try clicking 'Refresh' to rediscover cameras.
• Kāore e taea te tuhi/tākaro anō:
  • Confirm that a 3.5-inch SATA HDD is installed in the DVR.
  • Check the HDD status in the DVR's 'Storage' settings. The HDD may need to be initialized or formatted.
• Difficulty Installing HDD: Some renewed units may have chassis screws that are difficult to remove. If you encounter this, contact support for assistance. Do not force screws as this may damage the unit.

7. Whakatakotoranga

8. Pūtāhui

This Hikvision DVR is a renewed product and is covered by the Whakahouhia a Amazon. If you are not satisfied with your purchase, renewed products are eligible for replacement or refund under this guarantee. Additionally, the product includes a US warranty from Hikvision.

9. Tautoko

For technical assistance or inquiries, please utilize the following resources:

• Tautoko a US: This product comes with US support from Hikvision. Refer to the official Hikvision US webpae mo nga korero whakapā.
• Tautoko Īmēra: You may also contact support via email at Aroha@Hiseeu.com.