Dlyfull UT4 Universal 4-Slot Battery Charger Instruction Manual

1. Kupu Whakataki

The Dlyfull UT4 is a versatile 4-slot battery charger designed to accommodate a wide range of rechargeable battery types, including Li-ion, IMR, INR, ICR, Ni-MH, Ni-Cd, and LiFePO4. It features multiple operating modes such as Charge, Discharge, Refresh, and Test, along with a USB power bank function. This manual provides detailed instructions for safe and efficient use of your Dlyfull UT4 charger.

2. Whakatupato Haumaru

• Use the charger only with compatible battery types as specified in this manual. Attempting to charge incompatible batteries may result in damage or injury.
• Do not disassemble, modify, or short-circuit the charger.
• Avoid exposing the charger to water, high humidity, or extreme temperatures.
• Kia matara atu te rihi i nga tamariki me nga kararehe.
• Me whakarite kia tika te hau i te wa e mahi ana kia kore ai e wera rawa.
• Disconnect the power supply when the charger is not in use or during cleaning.
• If any unusual behavior or damage is observed, discontinue use immediately and contact support.
• Tuhipoka: Kāore ngā pākahiko i roto i tēnei hua.

3. Hua Neke Atuview

3.1 Waehanga

The Dlyfull UT4 charger features four independent charging slots, an LCD display, and two control buttons.

Whakaahua: Mua view of the Dlyfull UT4 charger, showing the LCD screen, four battery slots, and two control buttons (MODE and SLOT).

3.2 Nga waahanga matua

• Hototahi Ao: Supports 3.7V Li-ion, 3.2V LiFePO4, IMR, INR, ICR, and 1.2V Ni-MH/Ni-Cd batteries.
• Aratau Mahi Maha: Charge, Discharge, Refresh, and Test.
• Whakaaturanga LCD Maamaa: A high-resolution LCD screen displays current operating mode, battery type, voltage (V), current (A), capacity (mAh), temperature (°C), and time (h), providing comprehensive status information.
• Whakataki Tere: The charger utilizes adaptive current technology, automatically adjusting the charging current up to 2A. A 2000mAh battery can be fully charged in approximately 1 hour. Input: USB Type-C 5V/2A.
• Taumahi Puke Hiko USB: Use a Li-ion battery in slot 1 to charge external devices via the USB output (5V/2A).
• Nga Parenga Haumaru: The charger incorporates overcharge, overcurrent, overvoltage, te whakahaere i te pāmahana, me te whakamarutanga ara-poto.
• USB Momo-C Whakauru: 5V/2A input for power supply.

Image: The Dlyfull UT4 charger with icons representing its safety features: overcharge protection, overcurrent protection, overvoltage protection, temperature control, and short-circuit protection.

4. Tatūnga

1. Hono Hono: Connect the USB Type-C cable to the charger's input port and the other end to a 5V/2A USB power adapter (not included), PC, car charger, or power bank.


Image: The Dlyfull UT4 charger with its USB-C input port, illustrating connection to a USB adapter, PC, car charger, solar panel, or power bank.

2. Kōkuhu Pūhiko: Carefully insert up to four compatible rechargeable batteries into the charging slots. Ensure correct polarity (+/-). The charger will automatically detect Ni-MH/Ni-Cd/Li-Ion batteries. For LiFePO4 batteries, manual selection is required (see Operating Modes).

5. Aratau Mahi

The Dlyfull UT4 offers four primary operating modes: Charge, Discharge, Refresh, and Test. Use the MODE a Tuhinga buttons to navigate and select functions.

Image: The Dlyfull UT4 charger's LCD screen displaying the available modes (Charge, Discharge, Refresh, Test) and battery slot indicators, with labels for battery type, voltage, capacity, temperature, current, and time.

5.1 Kōwhiringa Aratau

1. After inserting a battery, the charger will display information for that slot.
2. Pehia te Tuhinga button to select the desired battery slot (1, 2, 3, or 4).
3. Pehia te MODE button to cycle through the available operating modes: Charge, Discharge, Refresh, Test.
4. Once the desired mode is selected, the operation will begin automatically after a few seconds of inactivity, or you can press the MODE patene ano hei whakau.
5. For LiFePO4 batteries, after inserting, press the MODE button to manually select "LiFePO4" as the battery type.

Image: A close-up showing fingers interacting with the 'MODE' and 'SLOT' touch buttons on the Dlyfull UT4 charger's interface.

5.2 Ngā Whakaahuatanga Aratau

• Utu: Standard charging function. The charger will automatically detect the battery type (except LiFePO4) and apply an adaptive charging current.
• Tukunga: Discharges the battery to eliminate memory effect, particularly useful for Ni-Cd batteries.
• Tāmata: Cycles the battery through discharge and charge cycles to restore its maximum capacity, often used for older batteries.
• Whakamātautau: Measures and displays the actual capacity of the battery by fully discharging and then fully charging it. This process can take several hours.

5.3 Mahi Puke Hiko

The Dlyfull UT4 can function as a power bank to charge external devices. This function is available when a Li-ion battery is inserted into Mokamoka 1.

1. Ensure a charged Li-ion battery is in Slot 1.
2. Disconnect the charger from its main power input (USB-C).
3. Connect your external device (e.g., smartphone, MP3 player, tablet) to the USB-A output port on the charger.
4. The charger will begin supplying 5V/2A power to your device.

Image: The Dlyfull UT4 charger with a Li-ion battery in slot 1, connected via its USB-A output to a smartphone, demonstrating its power bank capability.

6. Compatible Batteries

The Dlyfull UT4 charger supports a wide range of battery sizes and chemistries:

• 3.7V Li-ion / IMR / INR / ICR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123A), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, 32650.
• 3.2V LiFePO4: (Same sizes as Li-ion, manual selection required).
• 1.2V Ni-MH / Ni-Cd: A, AA, AAA, AAAA, C, SC, D.

Image: A visual representation of the Dlyfull UT4 charger's compatibility with various battery types, including 1.2V Ni-MH/Ni-Cd and 3.6V/3.7V Li-ion, and 3.2V LiFePO4 batteries, listing common sizes.

7. Whakaaturanga Whakaaturanga LCD

The intelligent LCD screen provides comprehensive real-time data:

• Aratau: Indicates the current operating mode (Charge, Discharge, Refresh, Test).
• Momo Pūhiko: Displays detected or selected battery chemistry (Li-ion, LiFePO4, Ni-MH/Ni-Cd).
• Voltage (V): Puhiko pūhiko o nāianeitage.
• Nāianei (A): Current charging or discharging ampwhakatipu
• Raukaha (mAh): Accumulated capacity during charge/discharge or tested capacity.
• Paemahana (°C): Internal temperature of the charger or battery.
• Time (h): Elapsed time for the current operation.
• Tau mokamoka: Indicates which battery slot's information is currently displayed.

8. Tiaki

• Clean the charger regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Keep the charging slots free from dust and debris to ensure proper contact.
• Whakaorangia te rihi ki te waahi makariri, maroke ki te kore e whakamahia.
• A ape i te tuku, te tuku ranei i te rihi ki nga paanga kaha.

9. Te Raru

10. Whakatakotoranga

• Tāuru: USB Momo-C 5V/2A
• Output (Charging): Adaptive current (up to 2A per slot, automatically adjusted)
• Output (USB Power Bank): 5V/2A (from Slot 1 with Li-ion battery)
• Momo Pūhiko Hototahi:
  • 3.7V Li-ion / IMR / INR / ICR (e.g., 18650, 21700, 26650)
  • 3.2V LiFePO4 (manual selection required)
  • 1.2V Ni-MH / Ni-Cd (e.g., AA, AAA, C, D)
• Aratau Mahi: Utu, Tukunga, Whakahou, Whakamātautau
• Whakaatu: LCD me te rama tuara
• Taumaha: 279.99 Karamu
• UPC: 742354393468

11. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the official Dlyfull webpae, whakapā atu ranei ki to kaihoko. Puritia to riiki hoko hei tohu mo te hoko.

Manufacturer: Dlyfull