Tamiya Gun Blaster XTO Premium Mini 4WD (Model 19451) Instruction Manual

Kupu Whakataki

This manual provides detailed instructions for the assembly, operation, and maintenance of your Tamiya Gun Blaster XTO Premium Mini 4WD kit. The Gun Blaster XTO Premium is a high-performance plastic model assembly kit featuring a shaft-drive four-wheel drive system and an FM-A chassis. It is inspired by the vehicle from the movie "Explosive Brothers Let's & Go!! WGP Raging Mini 4WD Chase." The model features a distinctive cowl design covering the front and rear tires, a streamlined cockpit, and an arched rear wing for aerodynamic stability. The body is molded in blue ABS plastic with black, yellow, and red graphic markings. Please read this manual thoroughly before beginning assembly to ensure correct construction and optimal performance.

Nga korero haumaru

• This product is a model kit and contains small parts. Keep out of reach of small children to prevent choking hazards.
• Assembly requires the use of hobby tools such as cutters, screwdrivers, and possibly knives. Exercise caution to avoid injury.
• Recommended age for assembly and use is 10 tau ki runga ake. Adult supervision is recommended for younger users.
• Batteries (2 AA) are required and must be purchased separately. Always insert batteries with correct polarity (+/-). Do not mix old and new batteries, or different types of batteries. Remove batteries when the model is not in use for extended periods.
• Makahia nga pākahiko kia rite ki nga ture o te rohe.

Ihirangi mokete

Your Tamiya Gun Blaster XTO Premium kit includes the following components:

• Plastic parts for body, chassis (FM-A), and other components
• Motini
• Nga wira me nga potae
• Gears and shafts
• Stickers/Decals for markings
• Tohutohu (tenei tuhinga)

Items not included (required for assembly and operation):

• 2 pākahiko AA
• Hobby tools (e.g., plastic side cutters, small screwdriver, hobby knife)

Tatūnga me te Runanga

Follow the step-by-step diagrams provided in the included printed instruction sheet for detailed assembly. The general steps are outlined below:

1. Whakaritea nga waahanga: Carefully cut all plastic parts from their sprues using plastic side cutters. Smooth any rough edges with a hobby knife or file.
2. Huihui te Chassis: Begin by assembling the FM-A chassis components, including the motor mount, battery holder, and gear housing. Ensure all gears are properly aligned and lubricated as indicated in the diagrams.
3. Tāutahia te Mōta: Insert the motor into its designated position within the chassis.
4. Attach Axles and Wheels: Secure the axles, wheels, and tires. Ensure wheels spin freely.
5. Huihuia te Tinana: Construct the main body shell, including the cowl and rear wing.
6. Tāpirihia ngā whakapiripiri: Carefully apply the provided stickers/decals to the body according to the reference images for the Gun Blaster XTO Premium.
7. Attach Body to Chassis: Securely attach the completed body to the FM-A chassis.

Image: The fully assembled Tamiya Gun Blaster XTO Premium Mini 4WD, showcasing its blue body, red wheels, and distinctive flame graphics.

Double-check all connections and ensure no parts are loose before proceeding to operation.

Nga Tohutohu Whakahaere

1. Tāuta Pūhiko: Open the battery compartment on the chassis. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment. Close the compartment securely.
2. Whakahiko: Locate the power switch on the chassis. Slide the switch to the "ON" position. The motor should begin to spin.
3. Turanga: Place your Mini 4WD car on a flat, smooth surface or a designated Mini 4WD race track.
4. Mahi: The car will move forward once powered on. There is no remote control; Mini 4WD cars are designed to run on tracks.
5. Weto Whakakore: To stop the car, slide the power switch to the "OFF" position. Remove batteries if storing the car for an extended period.

Te tiaki

• Te horoi: Regularly clean dust and debris from the chassis, gears, and motor area using a soft brush or compressed air. Avoid using water or harsh chemicals.
• Gear Lubrication: Periodically apply a small amount of Tamiya gear grease (sold separately) to the moving gear parts to ensure smooth operation and reduce wear.
• Wāhanga Pūhiko: Keep the battery compartment clean and dry. Check for any signs of corrosion.
• Te Pakaru o te Tāia: Inspect tires for wear and tear. Worn tires can affect performance. Replacement tires are available from Tamiya.
• Tirohanga Wāhanga: Regularly check all screws and connections to ensure they are tight. Replace any damaged or worn parts promptly.

Raparongoā

Whakatakotoranga

Pūtāhui me te Tautoko

For specific warranty information regarding your Tamiya Gun Blaster XTO Premium Mini 4WD kit, please refer to the documentation included in the product packaging or visit the official Tamiya website. Tamiya products are known for their quality, and support for parts and technical assistance can typically be found through authorized dealers or the manufacturer's customer service channels.

If you encounter issues not covered in this manual, please contact Tamiya customer support or your local hobby shop for assistance.