Pukapuka Kaiwhakamahi mō te Kāmera Iti iBeam Pango, Koki Pūmau

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Nga korero haumaru

• Momotuhia te pākahiko o te waka i mua i te tiimata i te whakaurunga hiko.
• Me whakarite kia tika te whakamaarama me te whakamau i nga waea katoa kia kore ai he ara iahiko poto, he kino ranei.
• Kaua e ārai i te ara o te taraiwa view rānei e whakararuraru i ngā mana whakahaere o te waka i te wā e tāuta ana.
• Me toro atu ki tetahi kaitautauta ngaio mena kaore koe i te tino mohio mo tetahi waahanga o te tukanga whakauru.
• This product is intended as an aid and should not replace safe driving practices.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Te Kai-ruinga
• Pukapuka Tohutohu (tenei tuhinga)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Hua Neke Atuview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Whakaahua: He tata view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Āhuatanga matua:

• Hoahoa Kiato: Small footprint for discreet installation.
• Ātete wai: IP68 rated for reliable performance in various weather conditions.
• Pūoko Atahanga: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view mua ranei view).
• Whakapiki: Features an 8MM threaded bolt for secure mounting.

5. Tatūnga me te Tāuta

Follow these steps for proper installation of your iBeam Micro Camera:

1. Kōwhiri Tauwāhi Whakapuru: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Whakapaia te Mata Maunga: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Maunga te Kamera: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Hononga Waea:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Taumahinga Whakamatau: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Waea Haumaru: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Nga Tohutohu Whakahaere

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Takotoranga Whakaahua: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Tiaki

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Te horoi: Me horoi i ia wa te arotahi kamera ki te ngohengohe, damp he kakahu hei tango i te paru, te puehu, te wai ranei ka arai i te view. Do not use abrasive cleaners.
• Tirotiro: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Avoid High-Pressure Washing: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Te Raru

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webpae. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.

Kaihanga: Te Kamupene Hikohiko Metra