1. Kupu Whakataki
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.
Figure 1: Complete Lepro LED Strip Lights Kit
2. Ihirangi mokete
Manatokohia kei te noho nga waahanga katoa i roto i te kete:
- 2 x 16.4ft (5m) RGB LED Strip Lights
- 1 x 44-Key IR Remote Control
- 1 x 12V Pūurutau Hiko
- 1 x Control Box (IR Receiver)
3. Tāuta me te Tatūnga
A pee i enei taahiraa mo te whakauru tika:
- Whakapaia te Mata: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
- Ine me te Tapahi (Whiringa): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
- Tāpirihia te Rīpene: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
- Tūhono Wae:
- Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
- Connect the 12V power adapter to the control box.
- Monohia te urutau hiko ki te putanga hiko paerewa.
- Whakahohe Mamao: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Figure 2: Connection Diagram for LED Strip Lights
For a visual guide on installation and various applications, please refer to the official product video below:
Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.
4. Nga Tohutohu Whakahaere
The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.
Figure 3: 44-Key IR Remote Control Layout
Nga Mahi Mana Mamao:
- Kā/Weto: Power button to turn the lights on or off.
- Whakaritenga Tirohanga: Up/Down arrows to increase or decrease brightness.
- Tīpakonga Tae: 20 preset static colors, including Red, Green, Blue, and White.
- Ngā Tae DIY: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- Aratau Hihiko: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.
5. Tiaki
To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:
- Te horoi: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- Taiao: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
- Tiaki whakapiri: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.
6. Te Raru
If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore nga rama e ka ana. |
|
|
| Kaore e mahi te mana mamao. |
|
|
| Some LEDs show incorrect color or are off. |
|
|
| LED strip falls off surface. |
|
|
7. Whakatakotoranga Hua
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | Repera |
| Tau tauira | 410084-RGB-US-NF-a |
| Tae | RGB (Whero, Kakarariki, kikorangi) |
| Mahinga o roto/waho | Roo-roto |
| Āhuahira Motuhake | Karekau |
| Momo Puna Maama | LED |
| Puna Mana | Hiko Hiko |
| Rauemi | Parahi, Kirihou |
| Momo Kaiwhakahaere | Mana Mamao |
| Te maha o nga puna marama | 300 (total for 32.8ft) |
| Voltage | 12 Volts |
| Wattage | 36 watts |
| Taumaha Tūemi | 0.33 Kirokaramu (11.6 hekere) |
| Te Roa o te Tuemi | 32.8 Feet (2 x 16.4ft) |
8. Nga Korero Whakaputanga
Ko tenei hua ka hipokina e te a 2-tau pūtāhui from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
9. Tautoko Kiritaki
For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.
