Sharp Digital Alarm with AccuSet - Automatic Smart Clock User Manual

Kupu Whakataki

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Sharp Digital Alarm Clock, front view, showing red LED display with time 12:08.

Whakaahua 1: Mua view of the Sharp Digital Alarm Clock.

Nga waahanga hua

AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
High/Low Dimmer Control: Ka taea te whakarite wherikotanga whakaatu.
Pūhiko Whakamuri: Pre-installed CR2032 battery for time settings retention during power outages.
Tīpakonga Rohe Wā: Easily select your local time zone.

Diagram showing key features of the Sharp Digital Alarm Clock: Large 0.9 inch Red LED Display, AccuSet Automatic Time Setting, High & Low Display Dimmer Control, Easy Set Top Button Controls, and Installed Battery Backup.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Tatūnga

1. Initial Power-Up and Time Zone Selection

Locate the time zone switch on the bottom of the clock.
Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

To adjust for Daylight Savings Time:

Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
For Standard Time, slide the switch to WATE to subtract one hour (-1 hr).

3. Pūrua Pūrua

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Nga Tohutohu Whakahaere

Runga view of the Sharp Digital Alarm Clock showing button labels: DIMMER HI/LO, TIME SET, ALARM SET, SNOOZE, HOUR SET, MINUTE SET, ALARM ON/OFF. Also indicates PM indicator and ALARM indicator on the display.

Figure 3: Top panel controls and display indicators.

1. Te Whakatakoto i te Whakaoho

Pehia te WHAKATAHI PANUI button once. The alarm time will flash on the display.
Pehia te HOUR SET button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
Pehia te HEI WHAKAMAHI paatene hei whakatika i te meneti whakaoho.
Pehia te WHAKATAHI PANUI button again to confirm and exit alarm setting mode.

2. Turning Alarm On/Off

To turn the alarm ON, pehia te PANUWHIRI ON / WAWHI button. The alarm indicator light on the display will illuminate.
To turn the alarm WATE, pehia te PANUWHIRI ON / WAWHI button again. The alarm indicator light will turn off.

3. Mahi whakamoe

Ka tangi te whakaoho, pehia te rahi Whakatā button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

4. Mana Whakaiti i te Āhua

Hei whakatika i te kanapa o te whakaaturanga LED:

Pehia te DIMMER HI/LO button to toggle between high and low brightness settings.

Kati-ake view of the Sharp Digital Alarm Clock display, highlighting the high and low dimmer control feature.

Figure 4: Display brightness adjustment.

Te tiaki

Te Whakakapinga Pūhiko (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.

Unplug the clock from the electrical outlet.
Locate the screw-secured battery compartment on the bottom of the clock.
Unscrew the compartment cover and carefully remove the old CR2032 battery.
Insert a new CR2032 battery, ensuring the correct polarity (+ side up).
Replace the compartment cover and secure it with the screw.
Plug the clock back into the electrical outlet.

Tuhipoka: Makahia nga pākahiko tawhito kia rite ki nga ture o te rohe.

Raparongoā

Raruraru	Take pea	Rongoā
Ko te whakaaturanga karaka kei te waatea.	Karekau he kaha.	Ensure the clock is securely plugged into a working electrical outlet. Check the power source.
Kei te he te wa.	Incorrect time zone selected; DST switch incorrect; Power interruption.	Verify the time zone switch on the bottom of the clock. Check the DST switch position. If power was interrupted, the AccuSet should reset the time; if not, check/replace backup battery.
Kare e tangi te whakaoho.	Kāore te whakaoho i whakahohea; Kāore i te tika te whakatakoto wā whakaoho.	Ensure the alarm indicator light is on (press ALARM ON/OFF button). Verify the alarm time is set correctly.
He kanapa rawa/pōuri rawa te whakaaturanga.	Me whakarite te tautuhinga dimmer.	Press the DIMMER HI/LO button to cycle through brightness settings.

Whakatakotoranga

Waitohu: koi
Tauira: B089ZMSR39
Tae: Black-red Led
Momo Whakaatu: Mamati
Āhuahira Motuhake: Tautuhi Aunoa
Rahi Hua: 5.5"W x 2.6"H
Puna Hiko: Hiko Hiko
Pūhiko Pūrua: 1 x CR2032 Lithium Ion (included)
Taumaha Tūemi: 10.2 hekere
UPC: 049353004426
Kaihanga: koi

Diagram showing the dimensions of the Sharp Digital Alarm Clock: 5.5 inches wide, 2.6 inches high, and 2.45 inches deep. The display size is 0.9 inches.

Whakaatu 5: Te rahi o te hua.

Nga korero taapiri

For further assistance or product inquiries, please refer to the official Sharp webpaetukutuku, whakapā atu ranei ki a raatau tautoko kaihoko.

I hangaia tenei hua mo te whakamahi o roto anake.

	SHARP Atomic Wall Clock: Setup, Features, and Manual Comprehensive instruction manual for the SHARP Radio Controlled Atomic Wall Clock (Model SPC876), covering setup, time zone settings, DST, signal reception, manual setting, and warranty information.
	Sharp Atomic Clock SPC1019 Instructions and Warranty User manual and warranty information for the Sharp Atomic Clock SPC1019, detailing setup, time setting, alarm functions, and troubleshooting.
	SHARP SPC971 Atomic Wall Clock User Manual and Instructions Detailed instructions and safety information for the SHARP SPC971 Atomic Wall Clock, covering setup, battery replacement, and operation.
	Sharp SPC1003/1005 Atomic Weather Station User Manual Comprehensive guide for the Sharp SPC1003/1005 Atomic Weather Station, detailing features, setup, controls, and specifications for accurate time, weather, and environmental monitoring.
	Sharp Atomic Wall Clock SPC971: Instructions and Warranty User manual and warranty information for the Sharp Atomic Wall Clock (Model SPC971), detailing setup, features, and one-year limited warranty.
	Sharp SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds: User Guide Comprehensive guide to operating the Sharp SPC276 Digital Alarm Clock, covering features, setup, alarm functions, Bluetooth connectivity, sleep sounds, and safety precautions.

Sharp B089ZMSR39