Lepro Smart LED Strip Light 5m RGB IP65 Waterproof User Manual

1. Kupu Whakataki

Thank you for choosing the Lepro Smart LED Strip Light. This manual provides essential information for the safe and efficient use of your new LED strip light. Please read these instructions carefully before installation and operation, and retain them for future reference.

2. Nga korero haumaru

• Me mohio kua momotuhia te hiko hiko i mua i te whakaurunga, te tiaki ranei.
• Ko te voltage is 12V. Use only the provided power adapter.
• This product is IP65 waterproof, suitable for both indoor and outdoor use. However, the power adapter and controller are not waterproof and must be protected from moisture.
• Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
• Kaua e taea e nga tamariki.
• The LED strip is designed with short-circuit protection for enhanced safety.
• Āta karohia te whiti tika o ngā kanohi ki te pūtake mārama mō te wā roa.

3. Ihirangi mokete

Manatokohia kei te noho nga waahanga katoa i roto i te kete:

• 5m RGB IP65 Waterproof LED Strip
• Kaiwhakahaere WiFi
• Power Adapter (European Adapter 12V 1.5A)
• Mana Mamao

Whakaahua 3.1: Ka mutuview of the Lepro Smart LED Strip Light and its included components, such as the LED strip reel, WiFi controller, and power adapter.

4. Nga Hua o te Hua

• Mana atamai: Connects via WiFi (2.4 GHz only) for stable control.
• Mana Reo: Compatible with Amazon Alexa and Google Assistant, no additional hub required.
• Taumahinga Taupānga: Features include countdown, automatic execution, timer function for preset scenarios, and various scene modes.
• Dimmable RGB: Offers a wide range of colors and adjustable brightness.
• IP65 parewai: Designed for versatile indoor and outdoor decoration.
• Tirohanga Teitei: Equipped with 30 LEDs per meter for enhanced illumination.
• Haumaru ki te pa: Operates at a low 12V, ensuring minimal heat and safety.

Whakaahua 4.1: The IP65 waterproof LED strip installed in an outdoor setting, demonstrating its suitability for various environments.

Whakaahua 4.2: Top image shows a hand safely holding the illuminated LED strip. Bottom image provides a close-up view of the IP65 waterproof coating on the LED strip.

5. Aratohu Whakauru

1. Horoia te Mata: Me whakarite kia ma, kia maroke, kia maeneene hoki te mata o te tāutanga.
2. Ine me te Tapahi (Whiringa): If necessary, measure the desired length and cut the LED strip only at the designated cutting marks (usually indicated by a scissor icon or copper pads).
3. Peera me te Rakau: Remove the adhesive backing from the LED strip and firmly press it onto the desired surface.
4. Tūhono Wae: Connect the LED strip to the WiFi controller, and then connect the controller to the power adapter.
5. Mono Mai: Monohia te urutau hiko ki te putanga hiko paerewa.

6. Nga Tohutohu Whakahaere

6.1 Basic Control with Controller Button

After plugging in the strip, you can use the physical button on the controller to:

• Turn the lights ON/OFF.
• Cycle through different scene modes.
• Reset the device (usually by holding the button for several seconds).

6.2 Smart Control via Lepro LampUX App

For full functionality, download the "Lepro LampUX" app from your smartphone's app store.

1. Tikiake App: Rapua "Lepro LampUX" and install it.
2. Rēhita/Takiuru: Waihangahia he kaute, takiuru ranei.
3. Tāpiri Pūrere: Follow the in-app instructions to add your LED strip light. Ensure your phone is connected to a 2.4 GHz WiFi network during setup.
4. Mana: Once connected, you can control power, color, brightness, set timers, schedules, and customize scene modes directly from the app.

Whakaahua 6.1: A smartphone screen showing the Lepro LampUX app interface, including a color wheel for light customization and options for smart control. The image also depicts a modern home with LED strip lighting.

Whakaahua 6.2: A collage of smartphone screens illustrating various features of the Lepro LampUX app, such as timer settings, scheduling, color options, smart modes, scene modes, and DIY customization.

6.3 Voice Control with Alexa/Google Assistant

To enable voice control, link your Lepro LampUX account with Amazon Alexa or Google Assistant:

1. Open Smart Assistant App: Open the Amazon Alexa or Google Home app on your smartphone.
2. Whakahohe Pūkenga/Mahi: Rapua the "LE Lampux" skill (for Alexa) or action (for Google Assistant) and enable it.
3. Hononga Pūkete: Follow the prompts to link your Lepro LampUX account.
4. Tirohia nga Pūrere: Kia honoa, tonoa tō kaiawhina atamai kia kimi i ngā pūrere hou.
5. Tono Reo: You can now use voice commands such as "Alexa, turn on the bedroom light" or "Hey Google, change the strip light to purple."

Whakaahua 6.3: A visual guide on a smartphone screen demonstrating the process of linking the Lepro LampUX app with Amazon Alexa, showing the steps to enable the skill and connect accounts.

Whakaahua 6.4: A family enjoying LED strip lighting in their living room, with smart speakers visible, illustrating the convenience of voice control with commands like "Alexa, change the strip light to purple."

7. Tiaki

• Te horoi: Gently wipe the LED strip with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Tirotiro: Periodically check the strip and connections for any signs of damage or wear.
• Rokiroki: Mena ka roa te wā e rongoa ai te rīpene, kia ma, kia maroke, kia kore hoki e pakaru.

8. Te Raru

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

Mō ngā mōhiohio pūtāhui, tautoko hangarau rānei, tirohia ngā tuhinga kua tāpirihia mai i tō hoko, tirohia rānei te paetukutuku mana o Lepro. website. Contact details for customer service are typically available on the product packaging or the brand's online support page.