KAIWEETS HT200B AC Clamp Pukapuka Kaiwhakamahi Mita

1. Kupu Whakataki

Thank you for choosing the KAIWEETS HT200B AC Clamp Meter. This device is a compact, auto-ranging digital clamp meter designed for measuring AC current, AC/DC voltage, capacitance, continuity, resistance, and diode. It is suitable for various electrical testing applications in residential, commercial, and industrial settings. Please read this manual thoroughly before use to ensure safe and proper operation.

Whakaahua 1: KAIWEETS HT200B AC Clamp Meter. This image displays the overall design of the clamp meter, showing the red clamp jaw, black body, rotary dial, function buttons, and digital display.

2. Nga korero haumaru

WARNING: To avoid electric shock or personal injury, please read and follow all safety instructions carefully.

• Kia mau tonu ki nga ture haumaru o te rohe me te motu.
• Kaua e whakamahia te mita mēnā te āhua kua pakaru, kua pakaru rānei ngā taura whakamātautau.
• Kaua e tono nui ake i te reiti voltage, kua tohuhia ki te mita, i waenga i nga pito, i waenga ranei i tetahi tauranga me te whenua whenua.
• Kia tino tupato ki te mahi me te voltagkei runga ake i te 60V DC, 30V AC RMS ranei. Ko taua voltaghe morearea ohorere.
• Keep fingers behind the finger guards on the test leads during use.
• Do not measure AC current on uninsulated conductors.
• The KAIWEETS HT200B is rated CAT III 600V. Ensure the measurement category is appropriate for your application.
• This device measures AC current only. It does not measure DC current.
• Whakakapia ngā pākahiko ina puta te tohu pākahiko iti hei whakarite kia tika ngā pānui.

3. Hua Neke Atuview

The KAIWEETS HT200B features a robust design for reliable performance. Key components include:

• Clamp kauae: Whakamahia mō te ine i te iahiko AC kore-pa.
• Waea Hurihuri: Selects measurement functions.
• Whakaaturanga LCD: E whakaatu ana i ngā pānui ine me ngā tohu.
• Pātene Mahi: For specific features like HOLD, MAX, and backlight.
• Ngā Jack Tāuru: Mō te hono i ngā taura whakamātautau mō te voltage, resistance, capacitance, continuity, and diode measurements.

Whakaahua 2: Clamp Jaw Design. This image highlights the clamp jaw of the HT200B, showing its opening mechanism and a measurement of 26mm, indicating its capacity for clamphuri noa i nga kaiarahi.

4. Tatūnga

4.1. Tāuta Pūhiko

1. Me mohio kua whakawetohia te mita.
2. Kimihia te uhi o te wahanga pākahiko kei muri o te mita.
3. Whakamahia he huriwiri hei whakatuwhera i te wahanga pākahiko.
4. Insert two (2) AAA batteries, observing correct polarity (+ and -).
5. Whakakapia te uhi o te wahanga pākahiko ka mau ki te huri.

5. Nga Tohutohu Whakahaere

5.1. AC Ineine o Naianei

The HT200B can measure AC current up to 200A. It features auto-ranging for convenience.

1. Turn the rotary dial to the '2A', '20A', or '200A' AC current range. The meter will automatically select the appropriate range within the chosen setting.
2. Whakatuwheratia te clamp kauae mā te pēhi i te pū.
3. Kotahi anake te kaiārahi hiko (ora, kore rānei) i roto i te arai hiko.amp kauae. Kaua e taupokinaamp around multiple conductors or an entire cable, as this will result in an inaccurate reading of zero.
4. Read the AC current value on the LCD display.
5. If the current exceeds 3A, the display backlight will turn orange as a warning.

Important: This meter measures AC current only. It cannot measure DC current.

Whakaahua 3: Measuring AC Current with HT200B. This image shows the HT200B clamp meter actively measuring AC current by clamping around a single conductor, displaying a reading of 9.47A.

5.2. AC/DC Voltage Inenga

Hei ine AC, DC ranei voltage:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the 'V~' for AC voltage or 'V=' for DC voltage tautuhinga.
3. Honoa ngā taura whakamātautau kia whakarara ki te ara iahiko, ki te wāhanga rānei e hiahia ana koe ki te ine.
4. Pānuihia te voltage uara i runga i te whakaaturanga LCD.
5. Mena ko te voltage exceeds 80V, the display backlight will turn orange as a warning.

Whakaahua 4: Te Ine AC Voltage with HT200B. This image illustrates the HT200B measuring AC voltage using its test leads, showing a reading of 389V.

5.3. Te Inenga Raukaha

Hei ine i te kaha:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the capacitance symbol (typically '†').
3. Me whakarite kua pau katoa te hiko o te pūnga i mua i te honotanga o ngā taura whakamātautau.
4. Tūhonohia ngā arataki whakamātautau puta noa i ngā kāpeka pūnga iahiko.
5. Pānuihia te uara pūnga i runga i te whakaaturanga LCD.

Whakaahua 5: Capacitance Measurement with HT200B. This image shows the HT200B measuring the capacitance of a component, displaying a reading of 10.02 uF.

5.4. Whakamātautau Tonu

Hei whakahaere i tētahi whakamātautau haere tonu:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the continuity symbol (typically a speaker icon).
3. Honoa nga arataki whakamatautau puta noa i te ara iahiko, i te waahanga ranei.
4. If the resistance is below a certain threshold (usually around 50 ohms), the meter will emit an audible beep, indicating continuity.

5.5. Te Ine Ātete

Hei ine i te parenga:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the resistance symbol (Ω).
3. Ensure the circuit or component is de-energized before measurement.
4. Honoa nga kaiarahi whakamatautau puta noa i te waahanga.
5. Pānuihia te uara ātete i runga i te mata LCD.

5.6. Whakamātautau Diode

Hei whakamatautau i te diode:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the diode symbol (→|←).
3. Connect the red test lead to the anode and the black test lead to the cathode of the diode. A forward voltage drop (e.g., 0.5V to 0.8V for silicon diodes) should be displayed.
4. Reverse the test leads. The display should show 'OL' (Open Loop), indicating no conduction.

5.7. Nga Mahi Motuhake

• Tohu: Pēhia te paatene 'HOLD' hei whakatio i te panui o naianei kei te whakaaturanga. Patohia ano kia tukuna.
• MAX: Press the 'MAX' button to capture and display the maximum measured value. Press again to exit.
• Maama Whakamuri: Press the backlight button (often combined with another function) to illuminate the display for better visibility in low-light conditions.
• Whakaweto Aunoa: Ka whakaweto aunoa te mita i muri i te kore mahi mō tētahi wā hei penapena i te roa o te pākahiko.
• Orange Display Warning: The display backlight will turn orange if AC current exceeds 3A or voltage exceeds 80V, indicating a potentially high-energy situation.

6. Tiaki

6.1. Te horoi

Horoia te mita ki te pānuitangaamp kakahu me te hopi horoi ngawari. Kaua e whakamahia he mea whakakoi, he mea whakarewa rānei. Me whakarite kia maroke rawa te mita i mua i te whakamahinga.

6.2. Whakakapinga Pūhiko

When the low battery indicator appears on the display, replace the batteries as described in Section 4.1. Remove batteries if the meter will not be used for an extended period.

7. Te Raru

• Kore Whakaatu: Tirohia te tāutanga o te pākahiko, kia mōhio ai kāore ngā pākahiko e pau.
• Nga Panui Heke: Ensure correct function selection, proper test lead connection, and that the circuit is de-energized for resistance/capacitance measurements. For current, ensure only one conductor is within the clamp.
• 'OL' on Display: Indicates an over-range condition or an open circuit.
• Meter Does Not Turn On: Check batteries. If issues persist, contact customer support.

8. Whakatakotoranga

Whakaahua 6: KAIWEETS HT200B Size Comparison. This image shows the HT200B next to another clamp meter, illustrating its compact dimensions of 6.4*2.4*1.2 inches (163*60*30mm).

9. Pūtāhui me te Tautoko

KAIWEETS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official KAIWEETS webpae. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.