Fenge ED-S48102WE Electric Standing Desk User Manual

1. Kupu Whakataki

Thank you for choosing the Fenge ED-S48102WE Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new desk. Designed to enhance your workspace ergonomics and productivity, this desk features electric height adjustment, memory presets, and an anti-collision system. Please read this manual thoroughly before assembly and use to ensure safe and optimal performance.

Image 1.1: The Fenge ED-S48102WE Electric Standing Desk, showcasing tona hoahoa kiko me te paewhiri mana whakauru.

Image 1.2: Illustrates the versatility of the Fenge standing desk, allowing users to switch between sitting and standing positions for improved well-being.

2. Nga korero haumaru

• Me whakarite kia mau nga waahanga katoa i mua i te whakamahi.
• Do not overload the desk. The maximum weight capacity is 80 kg (176.3 lbs).
• Tiakina nga tamariki me nga kararehe mai i te tepu i te wa e mahi ana.
• Ensure there are no obstructions in the desk's path during height adjustment to prevent damage or injury. The anti-collision feature will stop movement if an obstruction is detected.
• Whakamahia anake te urutau hiko kua whakaratohia.
• Kaua e wetewete, e whakarerekē rānei i ngā wāhanga hiko o te tēpu. Whakapā atu ki te ratonga kiritaki mō te ratonga.

3. Ihirangi mokete

Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact Fenge customer support.

• Desk Top (1 piece, 110x60cm, 16mm thick)
• Desk Legs/Frame (2 pieces)
• Control Panel with Memory Function
• Pūurutau Hiko me nga Tauera
• Reinforcement Pipe
• Height Adjustment Feet (Adjusters)
• Assembly Hardware (Screws, Allen wrench, etc.)
• Pukapuka Tohutohu

4. Nga Tohutohu Huihuinga

Follow these steps carefully to assemble your Fenge Electric Standing Desk. It is recommended to have two people for assembly.

1. Wewete Waenga: Me ata tango nga waahanga katoa mai i te kete ka whakatakoto ki runga i te mata ma, ngawari kia kore e pakaru.
2. Tāpirihia ngā Waewae o te Tēpu: Secure the desk legs to the underside of the desk top using the provided screws. Ensure they are aligned correctly.
3. Install Reinforcement Pipe: Attach the reinforcement pipe between the two desk legs. This enhances stability.
   

   Image 4.1: The reinforcement pipe provides additional stability to the desk frame.

4. Tāpirihia te Paewhiri Mana: Mount the control panel to the underside of the desk top in an easily accessible location.
5. Tūhono Uira Hiko me te Mana: Connect the motor cables from the legs to the control box, and then connect the control panel cable to the control box. Finally, connect the power adapter to the control box and plug it into a power outlet.
   

   Image 4.2: Proper cable management under the desk ensures a tidy and safe setup.
6. Install Height Adjustment Feet: Screw the adjustable feet into the bottom of the desk legs. These can be adjusted to level the desk on uneven surfaces.
   

   Image 4.3: Adjustable feet allow for leveling the desk and ensuring stability.

7. Initial Power-On and Reset: After connecting all cables, plug in the desk. Perform an initial reset by pressing and holding the 'Down' button until the desk reaches its lowest position and then slightly rises. This calibrates the desk.

5. Nga Tohutohu Whakahaere

5.1. Paewhiri Mana ki rungaview

Image 5.1: The control panel features up/down arrows, memory presets (1-4), and a 'Set' button.

• Patene Runga (▲) / Raro (▼): Pēhia, ka pupuri tonu hei whakarerekē ā-ringa i te teitei o te tēpu. Tukua kia mutu.
• Tatūkē Pūmahara (1, 2, 3, 4): Rokiroki me te maumahara ki nga tautuhinga teitei e wha.
• 'S' (Set) Button: Used to save a desired height into a memory preset.

5.2. Te Whakatikatika i te Teitei o te Tēpu Mahi

• Whakatikatika ā-ringa: Press and hold the Up (▲) or Down (▼) button until the desk reaches your desired height.
• Te whakamahi i nga tatūkē Pūmahara: Press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

5.3. Te Whakatakoto i ngā Tautuhinga Mahara

1. Adjust the desk to your desired height using the Up (▲) or Down (▼) buttons.
2. Press the 'S' (Set) button. The display will show 'S'.
3. Within 3 seconds, press one of the memory buttons (1, 2, 3, or 4). The current height will be saved to that preset.

5.4. Pūnaha Anti-Tukinga

The Fenge ED-S48102WE desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly (2-3 cm) to prevent damage. Ensure the area around the desk is clear before operation, but this feature provides an extra layer of safety.

6. Tiaki

• Te horoi: Horoia te mata o te teepu me te anga ki te ngohengohe, damp kakahu. A ape i nga kaihoroi awhiowhio me nga matū kino.
• Tirotiro: Tirohia ngā tīwiri me ngā hononga katoa i ia wā, i ia wā, kia tino mau ai.
• Whakaha Uepu: Ensure cables are neatly organized and not pinched or tangled, especially during height adjustments.

7. Te Raru

8. Whakatakotoranga

Image 8.1: Detailed dimensions and height adjustment range of the Fenge ED-S48102WE desk.

9. Pūtāhui me te Tautoko

This Fenge product comes with a 12-marama whakamana from the date of purchase. In case of initial defects or issues during the warranty period, please contact Fenge customer support for assistance with returns or exchanges.

For further inquiries or technical support, please refer to the contact information provided with your purchase or visit the official Fenge webpae.