1. Kupu Whakataki
Thank you for choosing the V-TAC VT-3450 Wooden Pendant LampKei roto i tēnei pukapuka ngā mōhiotanga nui mō te tāutanga haumaru, te whakahaere, me te tiaki i tō rama hou. Pānuihia ēnei tohutohu i mua i te tāutanga, ā, puritia hei tirotiro ā muri ake nei.
The V-TAC VT-3450 is a contemporary wooden pendant lamp designed for indoor use. It features an E27 lamp holder and is suitable for various residential and commercial settings.
2. Nga Tohutohu Haumaru
- Momotuhia i nga wa katoa te puna hiko i mua i te whakaurunga, te tiaki, te whakakapinga rama ranei.
- Ko te whakaurunga me mahi e tetahi tohunga hiko i runga i nga ture waea a rohe.
- Me whakarite te voltage and frequency of the power supply match the specifications of the lamp.
- Kaua e neke ake i te wat teiteitage specified for the bulb (60W).
- I hangaia tenei hua mo te whakamahi o roto anake. Kaua e pa ki te wai, ki te makuku nui ranei.
- Me whakarite te lamp is securely mounted to a stable ceiling structure.
- Kaua e hipokina te lamp with any material. Allow adequate ventilation.
3. Ihirangi mokete
Tirohia te kete kia mōhio ai kei te wātea ngā wāhanga katoa, ā, kāore he pakaru:
- 1 x Wooden Pendant Lamp Fixture (shade, cable, ceiling rose)
- 1 x Mounting Hardware Kit (screws, wall anchors)
Kia mōhio: Kāore te pūangi E27 i roto, me hoko motuhake.
4. Tatūnga me te Tāuta
A pee i enei taahiraa mo te whakaurunga haumaru me te tika:
- Whakaritenga: Whakawetohia te pūtake hiko matua i te pūwāhi ara iahiko i mua i te tīmatanga o tētahi mahi hiko.
- Tohu: Hold the ceiling rose against the ceiling at the desired installation point and mark the drilling positions for the mounting screws.
- keri: Drill holes at the marked positions. Insert the wall anchors if necessary.
- Waea waea: Connect the electrical wires from the ceiling to the terminal block inside the ceiling rose. Ensure correct polarity: Live (L), Neutral (N), and Earth (E).
- Mounting the Ceiling Rose: Secure the ceiling rose to the ceiling using the provided screws.
- Whakaritea Te Roa Uera: If needed, adjust the length of the pendant cable by loosening the cable grip inside the ceiling rose, pulling the cable to the desired length, and then tightening the grip.
- Te taapiri i te whakamarumaru: Ensure the wooden shade is securely attached to the lamp hui pupuri.
- Inserting the Bulb: Carefully screw an E27 bulb (max 60W) into the lamp kaipupuri.
- Taki Whakamutunga: Ensure all connections are secure and the lamp is properly mounted. Restore power at the circuit breaker.
Figure 1: Diagram showing the dimensions of the V-TAC VT-3450 Wooden Pendant Lamp, including a diameter of 350mm and a height of 450mm for the shade, and a total cable length of 1000mm.
Figure 2: The V-TAC VT-3450 Wooden Pendant Lamp installed in a modern living room setting.
5. Nga Tohutohu Whakahaere
Once installed, the V-TAC VT-3450 pendant lamp operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.
Ko tenei lamp is compatible with dimmable E27 bulbs and a suitable dimmer switch (not included). If using a dimmable bulb and dimmer switch, follow the dimmer switch manufacturer's instructions for operation.
6. Tiaki
- Te horoi: Hei horoi i te lamp, ensure the power is off and the lamp is cool. Wipe gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.
- Whakakapi Purama: Always turn off the power supply and allow the bulb to cool completely before attempting to replace it. Unscrew the old bulb and screw in a new E27 bulb, ensuring it does not exceed the maximum wattage o 60W.
- Takitaki auau: Tirotirohia te lamp for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
7. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Lamp e kore e marama | Karekau he hiko Purama hapa Hononga waea matara | Tirohia te kaiwhati ara iahiko me te pana pakitara Whakakapia te rama Check wiring (ensure power is off) |
| Lamp hikipiki | Pupura matara Pana/porowhita whakapōuri kore hototahi Waea waea hē | Whakapaia te rama Ensure dimmer and bulb are compatible Korero ki tetahi tohunga hiko |
| Lamp ka wera rawa | Pupura wattage teitei rawa | Replace with a bulb that does not exceed 60W |
8. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | V-TAC |
| Tau tauira | 40501 |
| Kāhua | Nō nāianei |
| Rauemi | Te rakau |
| Puna Mana | Tauera Hiko |
| Whakawhiti Momo Tautanga | Monopoint |
| Max Wattage | 60 Watts |
| Putunga Pupura | E27 |
| Āhuahira Motuhake | Dimmable (with compatible bulb and dimmer) |
| Taumaha Hua | 1 kg |
| Momo Rūma | Dining Room (example) |
9. Pūtāhui me te Tautoko
Mō ngā mōhiohio pūtāhui me te tautoko kiritaki, tirohia ngā tuhinga i whakaratohia me tō hoko, whakapā atu rānei ki tō kaihokohoko. Puritia tō taunakitanga hoko mō ngā kereme pūtāhui katoa.
If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact a qualified electrician or the V-TAC customer support for assistance.
