Pukapuka Tohutohu mō te Pouaka Keemu Aerocool ATOMICLITE V1 Micro-ATX

1. Kupu Whakataki

Thank you for choosing the Aerocool ATOMICLITE V1 Micro-ATX Gaming Case. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system components.

For additional support or information, please visit the official Aerocool webpae.

2. Hua Neke Atuview

2.1 Nga waahanga matua

• High Performance Gaming Minitower Case: Designed for optimum component performance, compatible with Micro-ATX and Mini-ITX motherboards.
• Tautoko Kāri Whakairoiro: Accommodates high-performance graphics cards up to 297mm in length.
• Gaming Lighting: Features a mesh front panel with two 14cm FRGB LED fans for optimal ventilation and lighting.
• Professional Cooling: Includes front and rear FRGB fans, dual-chamber design, and support for liquid cooling (front and back).
• Additional Cooling Options: Ventilation on front, top, and back, with support for up to two additional fans above the power supply for VGA cooling.
• Whakawātea Whakamaana CPU: Space for CPU heat sinks up to 158mm.
• Easy Multimedia Access: Top panel includes 2x USB 3.0, 1x USB 2.0, HD audio, microphone ports, and power/reset buttons.

2.2 Ihirangi mokete

Tena koa tirohia kei roto nga waahanga katoa i roto i te kete:

• Aerocool ATOMICLITE V1 Micro-ATX Gaming Case
• Accessory box (containing screws, standoffs, cable ties, etc.)
• Pukapuka Tohutohu (tenei tuhinga)

2.3 Tautuhinga Wae

Familiarize yourself with the various parts of your ATOMICLITE V1 case.

Whakaahua 1: Koki-mua view of the Aerocool ATOMICLITE V1 case, showcasing the tempered glass side panel, the front mesh panel with an illuminated FRGB fan, and a rear FRGB fan.

Whakaahua 2: Tuhinga o mua view of the Aerocool ATOMICLITE V1 case, highlighting the full mesh front panel and the centrally mounted, illuminated FRGB fan.

3. Tatūnga me te Tāuta

3.1 Whakaritenga

• Me whakarite he wāhi mahi ma, he wāhi mārama hoki tōu.
• Gather all necessary tools, including screwdrivers (Phillips head recommended).
• Unpack the case and remove all internal packaging materials.
• Tangohia ngā taha o te pouaka mā te wetewete i ngā tīwiri kei muri o te pouaka.

3.2 Whakaaturanga Papa Pouaka

1. Identify the pre-installed standoffs for Micro-ATX or Mini-ITX motherboards. Install additional standoffs if required for your specific motherboard form factor.
2. Āta whakanohoia tō papahoahoa ki runga i ngā tūāpapa, me te whakarite i ngā kōhao tīwiri.
3. Whakamaua te papahoahoa ki ngā tīwiri kua whakaratohia. Kaua e whakakī rawa.

3.3 Tāutanga Kāri Whakairoiro (GPU)

1. Tangohia nga uhi mokamoka PCIe e tika ana mai i muri o te keehi.
2. Align your graphics card with the PCIe slot on the motherboard.
3. Gently press the graphics card into the slot until it is fully seated.
4. Secure the graphics card to the case with screws. Note the maximum supported length of 297mm.

3.4 Te Whakanoho Puku Rokiroki

• Ngā SSD 2.5": Mount 2.5" SSDs behind the motherboard tray. Ensure to install these before the motherboard if access to screw holes is obstructed.
• Ngā HDD 3.5": Install 3.5" HDDs in the dedicated drive bays located in the power supply shroud area.

3.5 Whakaaturanga Whakaaturanga Hiko (PSU) Whakauru

1. Slide the power supply into its designated compartment at the bottom rear of the case.
2. Secure the power supply to the case using screws from the rear.

3.6 Whakahaere taura

Utilize the space behind the motherboard tray and the provided cable tie points to route and secure cables. Proper cable management improves airflow and aesthetics.

3.7 Fan and Cooling System Installation

The ATOMICLITE V1 comes with pre-installed FRGB fans. Additional cooling options include:

• Matao Wai: Support for liquid cooling radiators at the front and rear.
• Additional Fans: Space for up to two additional fans above the power supply for enhanced VGA cooling.

4. Nga Tohutohu Whakahaere

4.1 Hononga Paewhiri Mua

Connect the front panel cables (USB, Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

• USB 3.0: Connect the USB 3.0 cable to the motherboard's USB 3.0 header.
• USB 2.0: Connect the USB 2.0 cable to the motherboard's USB 2.0 header.
• Ororongo HD: Connect the HD Audio cable to the motherboard's audio header.
• Power/Reset Buttons: Connect the Power SW and Reset SW cables to the motherboard's front panel headers.
• Tohu LED: Connect the Power LED and HDD LED cables to the motherboard's front panel headers.

4.2 Te Whakakā i tō Pūnaha

Once all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable to the power supply. Press the power button on the top panel to start your system.

5. Tiaki

5.1 Dust Cleaning

Regularly clean your PC case to prevent dust buildup, which can hinder airflow and component cooling. Use compressed air to clear dust from fans, radiators, and mesh panels. For external surfaces, use a soft, damp kakahu.

5.2 Te Tiaki Tiaki

Periodically check the fans for any obstructions or excessive noise. Ensure fan blades are clean and free from dust. If a fan becomes excessively noisy or stops working, consider replacing it.

6. Te Raru

• Kāore te Pūnaha i te Hiko: Double-check all power connections, including the 24-pin ATX, 8-pin CPU, and GPU power cables. Ensure the power supply switch is in the 'ON' position. Verify front panel power switch connection to the motherboard.
• Fans Not Spinning/Lighting Up: Ensure all fan power cables (including Molex for FRGB fans) are securely connected. Note that the FRGB fans have fixed colors and are not programmable.
• Nga take whakamahana: Verify that all fans are spinning correctly and are oriented to provide adequate airflow. Ensure CPU cooler and GPU fans are functioning. Check for dust buildup.
• Kāore e Mahi ana ngā Tauranga o te Paewhiri o Mua: Confirm that the USB and HD Audio cables are correctly connected to the motherboard headers.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

For warranty information, please refer to the documentation provided by your retailer or visit the official Aerocool webpae. Puritia to tohu hoko mo nga kereme whakamana.

If you encounter any issues not covered in this manual, please contact Aerocool customer support or your point of purchase for assistance.

Aerocool Official Webpae: www.aerocool.io