1. Kupu Whakataki
Thank you for choosing the Cloudy Bay 6-inch Ultra Thin LED Recessed Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
2. Nga korero haumaru
- WHAKATŪPATO: Te Morea o te Ru Hiko. Momotuhia te hiko i te hiku, i te waahi ara iahiko ranei i mua i te whakauru, te mahi ranei.
- Me whakauru tenei hua ki runga i te waehere whakaurunga e tika ana ma te tangata e mohio ana ki te hanga me te mahi o te hua me nga aitua e pa ana.
- Me whakarite kia tika, kia mau hoki nga hononga hiko katoa.
- Do not alter or modify the fixture. Any alterations may void the warranty and create safety hazards.
- He pai mo damp ngā wāhi. Kāore i te whakaarohia kia pā tika ki te wai.
- Whakatauranga IC: He pai mō te whakapā tika ki te whakamarumaru.
3. Ihirangi mokete
Manatokohia kei te noho nga waahanga katoa i mua i te whakaurunga:
- 6 x 6-inch Ultra Thin LED Recessed Lights (Oil Rubbed Bronze finish)
- 6 x Remote Junction Boxes
- Installation Hardware (e.g., wire nuts, template)
Image: One Cloudy Bay 6-inch LED recessed light with its remote junction box, alongside a stack of five additional lights, all in an oil-rubbed bronze finish.
4. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Tau tauira | LJD006ORB3C-6PK |
| Whakauru Voltage | 120 Volts |
| Wattage | 15 Watts |
| Tirohanga | 950 Lumens |
| Te Paemahana Tae | 3000K (Warm White), 4000K (Cool White), 5000K (Daylight) - Selectable |
| Karekau | Yes (10%-100% with compatible LED dimmers) |
| Taupū Whakaatu Tae (CRI) | 90+ |
| Te ora | 25,000 haora |
| Tiwhikete | ETL, FCC, IC Rated, Damp Tauwāhi |
| Rauemi | Konumohe |
| Whakaoti | Te Parahi I pania ki te hinu |
| Rahi Whakanoho | 6.6"L x 6.6"W x 1"H |
| Recommended Cut Hole Size | 6-1/4 inihi |
Image: Detailed dimensions of the 6-inch recessed light fixture and its remote junction box, including a recommended cut hole size of 6-1/4 inches.
Whakaahua: Kati-ake view of the recessed light's features, highlighting the durable aluminum body, sponge gasket, UL listed quick connectors, CCT toggle switch, and various certifications like Damp Location, IC Rated, ETL, JA8, and CRI90+.
5. Aratohu Whakauru
Rārangi Arowhai i mua i te Tāutatanga:
- Me mohio kua MATE te hiko i te waahi iahiko.
- Confirm the ceiling material is suitable for recessed lighting.
- Use the provided template to mark the cut hole.
Hipanga Tāuta:
- Cut a 6-1/4 inch hole: Use the provided 1:1 hole template to accurately cut a 6-1/4 inch diameter hole in the ceiling.
- Open the Junction Box and Make Connections: Open the remote junction box. Feed the supply wires into the knockout hole. Connect the house wiring (Live, Neutral, Ground) to the corresponding wires in the junction box using appropriate wire connectors. Ensure all connections are secure.
- Tīpakohia te Paemahana Tae: Before inserting the junction box into the ceiling, locate the CCT (Correlated Color Temperature) toggle switch inside the junction box. Select your desired color temperature (3000K, 4000K, or 5000K). This setting cannot be changed after the junction box is installed without removing it.
- Insert the Junction Box: Carefully insert the remote junction box through the cut hole into the ceiling. The compact design allows it to fit into tight spaces.
- Honoa te Rama: Connect the cable from the recessed light fixture to the junction box. Ensure the connection is firm.
- Tāutahia te Maama: Hold the spring clips on the sides of the recessed light fixture against the fixture body. Gently guide the fixture into the ceiling hole until the clips snap into place, securing the light flush with the ceiling.
Image: Visual representation of the four main installation steps: cutting the hole, connecting wires in the J-Box, inserting the J-Box, and securing the light fixture with spring clips.
6. Nga Tohutohu Whakahaere
Te Tohu Paemahana Tae:
The Cloudy Bay recessed light offers three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). The desired color temperature must be selected using the CCT toggle switch located inside the remote junction box i mua installation. Once installed, the setting is fixed unless the junction box is accessed again.
Image: Visual guide to color temperature options (3000K Warm White, 4000K Cool White, 5000K Daylight) and the location of the CCT toggle switch on the junction box for selection.
Taumahinga Ngahuru:
This LED recessed light is dimmable from 10% to 100% with most standard LED dimmers. For optimal performance and to avoid flickering or buzzing, an ELV (Electronic Low Voltage) dimmer is highly recommended. Refer to the dimmer manufacturer's instructions for proper installation and operation.
Whakaahua: He whakaaturanga o te rūma nohoasing the dimming range of the recessed lights, from 10% to 100% brightness.
Nga Rima Hototahi:
For a comprehensive list of compatible dimmers, please refer to the table below. Using a non-compatible dimmer may result in reduced performance or damage to the fixture.
Image: A table listing various compatible dimmer models from brands like Lutron, Leviton, and Cloudy Bay, along with their dimming ranges and performance notes.
7. Tiaki
The Cloudy Bay LED Recessed Light requires minimal maintenance. To clean the fixture, ensure power is disconnected at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components. There are no user-serviceable parts inside the fixture.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kare te rama e ka ana | Kāore he pūtake hiko; Waea korekore; Pūrere hapa | Check circuit breaker and wall switch. Verify all wire connections are secure. If problem persists, contact customer support. |
| Ka pīataata, ka haruru rānei te mārama | Incompatible dimmer; Loose wiring; Electrical interference | Ensure a compatible LED dimmer is used (ELV recommended). Check wiring connections. Consult an electrician if interference is suspected. |
| Light output is too low or too high | Dimmer setting; Incorrect color temperature selected | Adjust dimmer to desired level. Verify CCT switch setting in the junction box (requires accessing the box). |
| Te tae marama koretake | CCT switch not set uniformly across multiple fixtures | Ensure all CCT switches on junction boxes are set to the same color temperature. |
9. Pūtāhui me te Tautoko
This Cloudy Bay LED Recessed Light is covered by a 3-tau iti pūtāhui mai i te ra o te hokonga. Ka kapi tenei raihana i nga hapa o nga rawa me nga mahi i raro i te whakamahinga noa. Kaore e kapi i te kino i puta mai i te whakaurunga hee, aituā, te whakamahi kino, te tukino, te whakarereketanga kore ranei.
For warranty claims, technical support, or any questions regarding your product, please contact Cloudy Bay customer service. Please have your model number (LJD006ORB3C-6PK) and proof of purchase available when contacting support.
Mōhiohio Whakapā: Tena tirohia nga korero a te kaihanga webte pae, to tuhinga hoko ranei mo nga korero whakapiri o naianei.
