1. Kupu Whakataki
This manual provides detailed instructions for the CaDA Pro HighSpeed Power System (Model S059-003). This system is designed to enhance your building block models with advanced motorization, lighting, and remote control capabilities. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Hua Neke Atuview
The CaDA Pro HighSpeed Power System includes the following components:
- 3 High-Performance Motors (M-Motor, L-Motor, Servo Motor)
- 2.4 GHz Rechargeable Battery Box (500 mAh, 7.4 V)
- Tautuhi Maama LED
- 2.4 GHz Mana Mamao
- Extension Cable (30 cm)
- Micro USB Charging Cable (75 cm)
- Components for Steering Wheel Control
Whakaatu 2.1: Neke Atuview of the CaDA Pro HighSpeed Power System components as packaged.
Whakaahua 2.2: Whakatata view of the individual components including motors, battery box, remote control, and cables.
3. Tatūnga me te Tāuta
Follow these steps to set up your CaDA Pro HighSpeed Power System with your building block model.
- Charge the Battery Box: Connect the Micro USB charging cable to the battery box and a suitable USB power source. The indicator light will show charging status. A full charge is recommended before first use.
- Tāuta Pūhiko ki te Mana Mamao: Open the battery compartment on the 2.4 GHz remote control and insert 2 x 1.5V AA batteries (not included), ensuring correct polarity.
- Connect Motors and LEDs: Attach the M-Motor, L-Motor, Servo Motor, and LED Light Set to your building block model as per your model's instructions. Use the 30 cm extension cable if additional reach is needed.
- Connect to Battery Box: Plug the cables from the motors and LED lights into the appropriate ports on the rechargeable battery box.
- Whakahoahoa Mana Mamao:
- Ensure the battery box is powered on.
- Whakakāhia te mana mamao. Ka mura te rama tohu i te mana mamao.
- Press and hold the pairing button on the battery box until the indicator light on both the battery box and remote control become solid, indicating successful pairing.
Figure 3.1: The 2.4GHz rechargeable battery box, which powers the system components.
4. Nga Tohutohu Whakahaere
Once the system is set up and paired, you can control your model using the 2.4 GHz remote control.
Figure 4.1: Diagram illustrating the features of the 2.4GHz remote control, including power switch, indicator light, forward/backward controls, and driving/steering controls.
- Whakawhiti Kaha: Located on the remote control, turn it on to activate the system.
- Maama Tohu: Shows the connection status. Solid light indicates successful pairing.
- Forward and Backward Controls: Use the left joystick/buttons to control the forward and backward movement of the model.
- Driving/Steering Controls: Use the right joystick/steering wheel to control the steering or other directional movements of the model.
- Ngā Pana Whakamuri: Specific switches may be present for fine-tuning motor direction.
- Smooth Start Control: The motors feature a smooth start control, accelerating gradually over one second instead of abruptly.
The 2.4 GHz system provides an interference-free connection with a remote control range of up to 30 meters.
5. Tiaki
To ensure the longevity and optimal performance of your CaDA Pro HighSpeed Power System, follow these maintenance guidelines:
- Te horoi: Use a dry, soft cloth to clean the components. Do not use water or chemical cleaners, as this can damage the electronic parts.
- Tiaki Pūhiko:
- Recharge the lithium-ion battery box regularly, even if not in use, to maintain battery health.
- Kaua e whakakaha rawa, kaua hoki e tuku rawa te pākahiko.
- Remove AA batteries from the remote control if storing for extended periods to prevent leakage.
- Rokiroki: Store the system components in a cool, dry place away from direct sunlight and extreme temperatures.
- Whakaha Uepu: Avoid bending or crimping cables excessively to prevent internal damage.
6. Te Raru
If you encounter issues with your CaDA Pro HighSpeed Power System, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore te punaha i te hiko. | Battery box is not charged or remote control batteries are dead. | Charge the battery box. Replace AA batteries in the remote control. |
| Ko te mana mamao kaore i te whakautu. | Not paired, out of range, or interference. | Re-pair the remote control and battery box. Ensure you are within 30m range. Move away from other 2.4GHz devices. |
| Motors not moving or moving slowly. | Low battery, incorrect connection, or motor obstruction. | Charge the battery box. Check all cable connections. Ensure no parts are blocking motor movement. |
| Ko nga rama LED e kore e mahi. | Loose connection or damaged LED set. | Check the connection of the LED light set to the battery box. |
If the problem persists after trying these solutions, please contact CaDA customer support.
7. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | S059-003 |
| Ngā Mōta kei roto | 1x M-Motor (up to 650 rpm), 1x L-Motor (up to 680 rpm), 1x Servo Motor |
| Pouaka Pūhiko | Lithium-ion, 500 mAh, 7.4 V, Rechargeable via Micro USB |
| Mana Mamao | 2.4 GHz, requires 2x 1.5V AA batteries |
| LED Light Set Cable Length | 53 cm |
| Roa Uera Toronga | 30 cm |
| Micro USB Charging Cable Length | 75 cm |
| Hototahi | Universal for CaDA and Lego models (e.g., C61001W, C61003W, C61007W, etc.) |
| Te Tau Manakohia | 12 tau ki runga ake |
| Rauemi Matua | Acrylonitrile Butadiene Styrene (ABS) |
8. Whakatupato Haumaru
WARNING: Contains toys. Adult supervision recommended.
- Kei roto i tenei hua etahi waahanga iti, kaore e pai mo nga tamariki kei raro iho i te 3 tau te pakeke na te mea ka koowaotia.
- Do not disassemble or modify the components.
- Do not expose the battery box to water, fire, or extreme temperatures.
- Ensure proper battery polarity when inserting batteries into the remote control.
- Makahia nga pākahiko kia rite ki nga ture o te rohe.
9. Pūtāhui me te Tautoko
CaDA products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official CaDA webpae, whakapā atu ranei ki to kaihoko.
For further assistance, you may visit the official CaDA webpae: www.doubleeagle.cc
