Sram GX Eagle AXS Rear Derailleur Instruction Manual

Kupu Whakataki

This manual provides essential information for the installation, operation, and maintenance of your Sram GX Eagle AXS Rear Derailleur. The Sram GX Eagle AXS system offers precise and reliable electronic shifting for an enhanced cycling experience. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Ihirangi mokete

Manatokohia kei roto i to kete nga mea katoa kua whakarārangihia i raro nei:

• Sram GX1 Eagle AXS 12-speed Lunar Max 52 Rear Derailleur
• Tuhinga (tenei pukapuka)
• Note: Battery for the AXS derailleur is not included and must be purchased separately.

Tatūnga me te Tāuta

Proper installation is crucial for the performance and longevity of your Sram GX Eagle AXS Rear Derailleur. If you are unsure about any step, consult a professional bicycle mechanic.

Utauta e hiahiatia ana

• Hex key set (e.g., 5mm)
• Te kuihi taipana
• Utauta mekameka
• Sram B-gap adjustment tool (recommended for optimal setup)
• Bicycle stand

Nga Waahi Whakataunga

1. Tāutahia te Derailleur: Securely attach the Sram GX Eagle AXS Rear Derailleur to your bicycle's derailleur hanger using the appropriate hex key. Tighten to the manufacturer's specified torque.
2. Tāutahia te mekameka: Route the chain correctly through the derailleur and connect it according to your chain manufacturer's instructions.
3. Install AXS Battery: Insert a charged Sram AXS battery (sold separately) into the derailleur. Ensure it clicks securely into place.
4. Pair with Shifter: Turn on your AXS shifter and derailleur. Press and hold the AXS button on both components until the LED flashes, then release. They should pair automatically.
5. Adjust B-Gap: Use the Sram B-gap adjustment tool to set the correct distance between the upper pulley and the largest cog on your cassette. This is critical for smooth shifting.
6. Ngā Wīwiri Whakatakotoria: Adjust the high (H) and low (L) limit screws to prevent the chain from over-shifting off the cassette.
7. Micro-Adjustments: Fine-tune shifting performance using the micro-adjustment feature on your AXS shifter. Refer to the Sram AXS user guide for detailed instructions on micro-adjustments.

Image: The Sram GX Eagle AXS Rear Derailleur, showcasing its robust design and electronic components. This image illustrates the main product for installation reference.

Mahi

The Sram GX Eagle AXS system provides intuitive electronic shifting.

Hurihuri

• Upshift: Press the designated upshift button on your AXS shifter to move the chain to a smaller cog (harder gear).
• Downshift: Press the designated downshift button on your AXS shifter to move the chain to a larger cog (easier gear).
• Huringa Maha: Some AXS shifters allow for multi-shifting by holding down a button. Refer to your shifter's manual for specific settings.

Tūnga Pūhiko

The LED indicator on the derailleur provides information about the battery charge level:

• LED Kakariki: Full to high charge.
• LED Whero: He iti te utu.
• Rama Whero Rama: Very low charge, recharge immediately.

Te tiaki

Regular maintenance ensures optimal performance and extends the lifespan of your derailleur.

• Te horoi: Keep the derailleur, jockey wheels, and chain clean from dirt and debris. Use a mild degreaser and brush, then rinse and dry thoroughly.
• Whakahinuhinu: Lubricate your chain regularly with appropriate chain lubricant. Avoid getting lubricant on the derailleur body or battery contacts.
• Tirotiro: Periodically inspect the derailleur for any signs of damage, loose bolts, or excessive wear on the jockey wheels. Replace worn parts as needed.
• Tiaki Pūhiko: Keep battery contacts clean and dry. Store batteries in a cool, dry place when not in use.
• Whakahōu Firmware: Use the Sram AXS app to check for and install any available firmware updates for your derailleur.

Raparongoā

Anei etahi take noa me o raatau otinga ka taea:

• Shifting is sluggish or inconsistent:
  • Tirohia te taumata utu pākahiko.
  • Manatokohia te whakatikatika o te āputa-B.
  • Ensure limit screws are correctly set.
  • Tirohia mēnā he piko te whakairi derailleur.
  • Horoia me te whakahinuhinu te taraiwa taraiwa.
• Derailleur not responding to shifter:
  • Confirm battery is charged and properly installed.
  • Re-pair the derailleur with the shifter.
  • Tirohia mo nga arai tinana e aukati ana i te neke.
• LED on derailleur is flashing red rapidly:
  • Battery is critically low. Recharge or replace the battery immediately.

Whakatakotoranga

Pūtāhui me te Tautoko

For detailed warranty information, technical support, and service inquiries, please visit the official Sram website or contact your authorized Sram dealer. Keep your proof of purchase for warranty claims.

Official Sram Webpae: www.sram.com