Gateman Digital Door Lock Instruction Manual

1. Kupu Whakataki

Thank you for choosing the Gateman Digital Door Lock. This manual provides essential information for the safe and efficient operation of your WNR-IS110 or WNR-IS120 digital door lock. Please read this manual thoroughly before installation and use, and keep it for future reference.

The Gateman WNR-IS110 and WNR-IS120 models offer advanced security features and convenient access methods. The WNR-IS110 primarily uses password authentication, while the WNR-IS120 supports both password and card key authentication.

2. Nga korero haumaru

Hei whakarite i te mahi haumaru me te aukati i te kino, me whai i nga whakatupato haumaru e whai ake nei:

• Do not disassemble, repair, or modify the lock yourself. This may void the warranty and cause malfunction.
• Keep the lock away from water and excessive moisture.
• Avoid exposing the lock to direct sunlight or extreme temperatures for prolonged periods.
• Whakamahia te momo pākahiko kua tohua anake, ā, kia tika te polarity i te wā e tāuta ana.
• Kaua e whakamahia he kaihoroi whakakoi, he wai whakarewa rānei ki te mata o te raka.
• Ensure all components are securely fastened during installation to prevent accidental detachment.

3. Ihirangi mokete

Tena koa tirohia kei roto nga waahanga katoa i roto i te kete:

• Gateman Digital Door Lock Unit (Exterior and Interior)
• Tinana Maukati Mortise
• Pahi Wharahi
• Mounting Hardware (Screws, Spindles, etc.)
• Pukapuka Kaiwhakamahi
• Card Keys (for WNR-IS120 model only)
• Emergency Keys (if applicable)

If any items are missing or damaged, please contact your retailer or Gateman customer support.

4. Tatūnga me te Tāuta

Professional installation is recommended for optimal performance and security. Ensure the door is prepared according to the provided template (not included in this manual, refer to physical template). This section provides a general overview.

4.1 Te Whakaritenga Kuaha

1. Measure door thickness to ensure compatibility (typically 35-50mm).
2. Drill necessary holes for the mortise lock, spindle, and mounting posts according to the installation template.

4.2 Mortise Lock Installation

1. Insert the mortise lock body into the prepared mortise pocket on the door edge.
2. Secure the mortise lock with screws.

4.3 Exterior Unit Installation

1. Pass the data cable and spindle through the door from the exterior side.
2. Align the exterior unit with the drilled holes and secure it temporarily.

4.4 Interior Unit Installation

1. Connect the data cable from the exterior unit to the interior unit.
2. Attach the interior mounting plate to the door, ensuring the spindle engages with the mortise lock.
3. Mount the interior unit onto the mounting plate and secure it with screws.

4.5 Tāuta Pūhiko

1. Whakatuwheratia te uhi pākahiko i runga i te waahanga o roto.
2. Insert the required number of AA alkaline batteries, observing polarity.
3. Close the battery cover. The lock should emit a sound indicating power-on.

4.6 Strike Plate Installation

1. Align the strike plate with the mortise lock bolt on the door frame.
2. Secure the strike plate with screws.

5. Nga Tohutohu Whakahaere

This section details the various methods for operating your Gateman Digital Door Lock.

Whakaahua 5.1: Mua view of the Gateman WNR-IS120 Digital Door Lock, showing the numeric keypad (1-9, *, 0, #) and the 'CARD' icon for card key authentication. The model number WNR-IS120 is visible at the bottom right.

5.1 Initial Setup and Master Password Registration

Upon first power-up, you will need to register a master password. This password is used for managing other settings and user access.

1. Whakatuwheratia te uhi pākahiko i runga i te waahanga o roto.
2. Pehia te [Rehitatanga] button (usually located near the battery compartment).
3. On the exterior keypad, enter your desired 4 to 10 digit master password.
4. Pehia te 🇧🇷 pātene hei whakaū.
5. The lock will emit a confirmation sound.

Note: Keep your master password confidential.

5.2 Opening the Door (Password)

To unlock the door using a password:

1. Pā atu ki te papapātuhi hei whakahohe.
2. Enter your registered password (4 to 10 digits).
3. Pehia te 🇧🇷 pātene.
4. The lock will unlock. Turn the handle to open the door.

Tip: Use the "Relief Imaginary Function" by entering random numbers before or after your actual password to prevent exposure. For example, if your password is 1234, you can enter 567123489#.

5.3 Opening the Door (Card Key - WNR-IS120 only)

To unlock the door using a registered card key:

1. Place your registered card key on the card reader area (indicated by the 'CARD' icon).
2. The lock will unlock. Turn the handle to open the door.

5.3.1 Registering Card Keys

1. Whakatuwheratia te uhi pākahiko i runga i te waahanga o roto.
2. Pehia te [Rehitatanga] pātene.
3. Place each card key you wish to register on the card reader area. The lock will beep for each successful registration.
4. Pehia te [Rehitatanga] button again to exit registration mode.

5.3.2 Deleting Lost Card Keys

If a card key is lost, you can delete it by re-registering all remaining valid card keys. The lost key will automatically be removed from the system.

1. Whakatuwheratia te uhi pākahiko i runga i te waahanga o roto.
2. Pehia te [Rehitatanga] pātene.
3. Wahi KATOA remaining valid card keys on the card reader area, one by one.
4. Pehia te [Rehitatanga] button again to exit registration mode.

5.4 Maukati i te Kuwaha

5.4.1 Maukati Aunoa

The lock is set to automatically lock after the door is closed. Ensure this feature is enabled in settings (refer to advanced settings in the full manual if available).

5.4.2 Manual Locking (Exterior)

To manually lock from the exterior, simply touch the keypad or press the 🇧🇷 button after closing the door.

5.4.3 Manual Locking (Interior)

To manually lock from the interior, press the [Kati] button or turn the thumb-turn (if applicable).

5.5 Forced Locking Function

5.5.1 Internal Forced Locking (Privacy Mode)

When activated, this function prevents the lock from being opened from the exterior using passwords or card keys. Ideal for when all family members are home.

• From the interior, press and hold the [Internal Forced Lock] button (or equivalent) for 3 seconds.
• The lock will confirm activation.
• To deactivate, simply open the door from the inside or deactivate via the interior unit.

5.5.2 External Forced Locking (Security Mode)

When activated, this function triggers an intrusion warning sound if the door is opened from the inside. Useful when leaving for extended periods (holidays, vacation).

• From the exterior, after closing the door, press and hold the [External Forced Lock] button (or equivalent) for 3 seconds.
• The lock will confirm activation.
• To deactivate, unlock the door normally from the exterior using a valid password or card key.

6. Tiaki

6.1 Te horoi

• Horoia te mata o te raka ki te kakahu ngohengohe, maroke.
• Do not use water, alcohol, or chemical cleaners, as they may damage the surface or internal components.
• The "Secure Palm Touch" feature helps minimize fingerprint residue on the keypad.

6.2 Whakakapinga Pūhiko

The lock will provide a low battery warning (audible alarm or indicator light) when batteries need replacement. Replace all batteries simultaneously with new ones of the same type.

• Whakatuwheratia te uhi pākahiko i runga i te waahanga o roto.
• Tangohia nga pākahiko tawhito katoa.
• Whakauruhia ngā pākahiko AA kawakore hou, kia tika ai te polarity (+/-).
• Katia te uhi pākahiko.

Note: If batteries are completely depleted, you may use a 9V battery for emergency power on the exterior unit (contact points usually located at the bottom of the exterior unit) to enter your password and open the door.

7. Te Raru

Mena ka mau tonu te raru i muri i te whakamatau i enei otinga, tena koa whakapā atu ki te tautoko a te kaihoko.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

Gateman products are designed for durability and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Gateman webpae.

Tautoko Kiritaki

If you encounter any issues or have questions regarding your Gateman Digital Door Lock, please contact customer support. When contacting support, please have your model number (WNR-IS110 or WNR-IS120) and purchase information ready.

Contact Information (Example - please refer to product packaging for official contact details):

• Waea: A/S 1544-3232
• Webpae: www.gateman.co.kr
• Īmēra: Refer to official webpae mō te puka whakapā, te wāhitau īmēra rānei.

For protection plans, consider options available at the time of purchase, such as 3-Year or 4-Year Protection Plans.