Rapoo MT550 Multi-Device Wireless Mouse User Manual

1. Kupu Whakataki

The Rapoo MT550 is a versatile multi-device wireless mouse designed for enhanced productivity and comfort. This manual provides detailed instructions for setting up, operating, and maintaining your MT550 mouse, ensuring optimal performance across various devices.

Ko nga ahuatanga matua ko:

• Multi-device connectivity (Bluetooth 3.0, Bluetooth 4.0, and 2.4G wireless)
• Adjustable DPI settings (600/1000/1300/1600)
• Hoahoa ergonomic mo te whakamahi whakamarie
• Long battery life of up to 12 months

Image: The Rapoo MT550 mouse, highlighting its design for endurance, versatility, and comfort.

2. Tatūnga

2.1. Tāuta Pūhiko

The Rapoo MT550 mouse requires two AA batteries (included). To install:

1. Rapua te uhi o te wahanga pākahiko kei raro o te kiore.
2. Kiriata te uhi kia tuwhera.
3. Whakauruhia nga pākahiko AA e rua, kia tika te polarity (+/-).
4. Katia te uhi o te wahanga pākahiko.

2.2. Te hono atu mā te ahokore 2.4G (Kaiwhiwhi USB)

For a 2.4G wireless connection:

1. Whakakāhia te kiore mā te whakamahi i te pātene ON/OFF kei raro.
2. Locate the USB receiver stored in the battery compartment.
3. Whakauruhia te kaiwhiwhi USB ki tetahi tauranga USB e waatea ana ki to rorohiko.
4. The mouse should automatically connect. If not, press the device switch button until the indicator for channel 4 (usually indicated by a specific light pattern or number) is active.

2.3. Te hono ma te Nihokikorangi

The Rapoo MT550 supports up to three Bluetooth connections. To connect:

1. Whakakāhia te kiore mā te whakamahi i te pātene ON/OFF.
2. Short press the device switch button to select a Bluetooth channel (1, 2, or 3). The corresponding indicator light will illuminate.
3. Press and hold the Bluetooth pairing button (often located near the device switch button) for approximately 3 seconds until the indicator light for the selected channel starts flashing rapidly. This indicates the mouse is in pairing mode.
4. On your device (computer, laptop, tablet, phone), enable Bluetooth and search for new devices.
5. Select "Rapoo MT550" from the list of available devices to complete the pairing process.
6. Repeat these steps to pair with up to two additional Bluetooth devices on channels 2 and 3.

Image: Labeled diagram of the Rapoo MT550 mouse, indicating the location of the ON/OFF switch, Bluetooth button, device switch button, battery slot, USB receiver, DPI button, scroller, and other buttons.

Image: A workstation demonstrating the Rapoo MT550 mouse connecting to multiple devices via Bluetooth or USB receiver.

3. Nga Tohutohu Whakahaere

3.1. Whakawhiti i waenganui i nga Pūrere

To switch between your connected devices:

• Short press the device switch button located on the underside of the mouse.
• Each press will cycle through the connected channels (1, 2, 3 for Bluetooth, 4 for 2.4G USB receiver). The corresponding indicator light will show the active channel.

3.2. Te Whakatikatika i te DPI (Te Tairongo)

The MT550 mouse features four adjustable DPI settings for precise control:

• Press the DPI button, located behind the scroll wheel, to cycle through the available settings: 600, 1000, 1300, and 1600 DPI.
• The indicator light will briefly change to reflect the selected DPI level.

Whakaahua: Kati-ake view of the DPI button on the Rapoo MT550 mouse, with the indicator light showing the current DPI setting.

3.3. Using Forward/Back Buttons

The two thumb buttons on the side of the mouse provide quick navigation:

• The forward button advances to the next page or folder.
• The back button returns to the previous page or folder.

4. Tiaki

4.1. Te horoi

To maintain the appearance and functionality of your mouse:

• Whakamahia he kakahu ngohengohe, maroke hei muru i te mata o te kiore.
• Āta karohia te whakamahi i ngā matū kaha, i ngā kaihoroi whakakoi, i ngā whakarewa rānei, nā te mea ka kino pea te āhua o te peita.

4.2. Whakakapinga Pūhiko

When the low battery indicator appears or the mouse becomes unresponsive, it's time to replace the batteries:

• Whāia ngā mahi tāutanga pākahiko kua whakarārangitia i te Wāhanga 2.1.
• Ensure you use two fresh AA batteries and insert them with the correct polarity.

4.3. Rokiroki

When not in use for extended periods, store the mouse in a dry, cool environment away from direct sunlight and extreme temperatures.

5. Te Raru

If you encounter issues with your Rapoo MT550 mouse, refer to the following troubleshooting steps:

5.1. Kaore Te Kiore e Whakautu

• Taki Hiko: Ensure the mouse is turned on using the ON/OFF switch.
• Tirohia nga Pikohiko: Verify that the batteries are correctly installed and have sufficient charge. Replace them if necessary.
• Kaiwhiwhi 2.4G: For 2.4G connection, ensure the USB receiver is securely plugged into a working USB port on your computer. Try a different USB port.
• Hononga Nihokikorangi: For Bluetooth, ensure Bluetooth is enabled on your device and the mouse is paired to the correct channel. Try re-pairing the mouse if the connection is lost.

5.2. Intermittent Connection or Lag

• Tata: Move the mouse closer to your computer or device to ensure a strong signal.
• pokanoa: Avoid using the mouse near other wireless devices (e.g., Wi-Fi routers, cordless phones) that might cause interference.
• Mata: Ensure you are using the mouse on a suitable surface. While the MT550 is designed for various surfaces, extreme textures or reflective surfaces can affect tracking.

5.3. DPI Not Changing

• Ensure you are pressing the dedicated DPI button, not another button.
• If the issue persists, try turning the mouse off and on again.

6. Whakatakotoranga

7. Pūtāhui me te Tautoko

Rapoo provides the following coverage for your MT550 Multi-Device Wireless Mouse:

• Pūtāhui: Pūtāhui 3-tau, kāore he āwangawanga.
• Kaupapa Whakahoki: 180-ra taurangi moni-hoki.

For further assistance, technical support, or warranty claims, please visit the official Rapoo webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko.