Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Kupu Whakataki

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Nga korero haumaru

• Momotuhia i nga wa katoa te hiko mai i te putanga o te pakitara i mua i te whakauru, te tango ranei i etahi waahanga.
• Kia tūpato te whakahaere i ngā wāhanga katoa kia kore ai e pāngia e te hiko pateko. Whakaarohia te whakamahi i tētahi whitiki ringaringa ārai-pateko.
• Kia tūpato ki ngā taha koi o roto i te pouaka.
• Puritia ngā wāhanga iti me ngā tīwiri kia matara atu i ngā tamariki.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. Ihirangi mokete

Tena koa tirohia kei roto katoa nga taonga kei roto i to kete:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Accessory Box (containing screws, standoffs, cable ties, etc.)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

4. Hua Neke Atuview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Āhuatanga matua:

• Tautoko Papamatua: Compatible with ATX, Micro-ATX, and ITX motherboards.
• Matao: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Dust Filtration: Equipped with a magnetic anti-dust mesh on the top panel.
• Rokiroki: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• Paewhiri Taha: Tempered glass side panels for an aesthetic view o nga waahanga o roto.

Whakaahua 4.1: Taha-mua view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

Whakaahua 4.2: Runga-raro view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Tatūnga me te Tāuta

5.1 Removing Side Panels

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Whakaaturanga Papa Pouaka

1. Install the I/O shield that came with your motherboard into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Secure the motherboard using the appropriate screws from the accessory box.

5.3 Whakaaturanga Whakaaturanga Hiko (PSU) Whakauru

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Te Whakanoho Puku Rokiroki

• Ngā HDD 3.5": Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• Ngā SSD 2.5": SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 Kāri Whakairoiro me ngā Kāri Whakawhanui

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Whakahaere taura

Whakamahia nga tapahi ararere taura me nga tohu here ki muri i te paepae papahoa hei whakahaere i nga taura. Ma tenei ka pai ake te rere o te hau me te rerehua.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Nga Tohutohu Whakahaere

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

Whakaahua 6.1: Whakatata view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Tiaki

• Te Whakapai i te Puehu: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Whakapai Whānui: Whakamahia he ngohengohe, damp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Te Tango Puehu ā-roto: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. Te Raru

8.1 Computer Does Not Power On

• Me whakarite kei te hono tika te taura hiko ki te PSU me te putanga hiko i te pakitara.
• Check that the PSU switch is in the 'ON' position.
• Manatokohia kei te tika te hono o te taura pana hiko o te papa o mua ki te pane o te papahoahoa.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Fans Not Spinning / RGB Not Lighting Up

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Nga Take Whakawera

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Horoia nga tātari puehu me nga waahanga o roto i nga wa katoa.
• Verify that CPU cooler and GPU fans are functioning properly.

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep webpae. Puritia to tohu hoko mo nga kereme whakamana.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.