Parkside PRTA 20-Li C3 Cordless Grass Trimmer Instruction Manual

1. Nga Korero Haumaru Nui

Please read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

Puritia nga whakatupato me nga tohutohu katoa hei tohutoro a meake nei.

Note: The product description did not provide specific safety warnings. Always refer to the complete safety manual included with your product for detailed safety guidelines before operation.

2. Hua Neke Atuview

The Parkside PRTA 20-Li C3 is a 20V cordless grass trimmer designed for efficient lawn edge trimming and light grass cutting. This tool offers cordless convenience for garden maintenance.

Whakaatu 2.1: Neke Atuview of the Parkside PRTA 20-Li C3 Cordless Grass Trimmer. This image shows the complete assembled unit, highlighting its ergonomic design and cordless nature.

2.1 Waehanga

• Kakau Matua me te Pātene Hiko
• Kakau awhina
• Pouaka Telescopic
• Te Upoko Kuti me te Potae Raina
• Tiaki Tiaki
• Battery Slot (Battery and charger sold separately)

Figure 2.2: Illustration indicating that the battery and charger are not included with the grass trimmer and must be purchased separately.

3. Tatūnga me te Runanga

Before first use, ensure all components are present and undamaged. Follow these steps for assembly:

1. Attach the Protective Guard: Secure the protective guard to the trimmer head using the provided fasteners. Ensure it is firmly in place to prevent debris from being thrown towards the user.
   

   Whakaahua 3.1: Whakatata view of the auxiliary handle and the protective guard attachment area, showing how the guard is positioned.
2. Tāutahia te Kakau Āwhina: Slide the auxiliary handle onto the shaft and adjust it to a comfortable working position. Tighten the locking mechanism.
3. Whakaritea te roa o te Wai: Extend or retract the telescopic shaft to achieve an ergonomic working height. Lock the shaft in position.
   

   Figure 3.2: The trimmer shaft can be adjusted for angle, allowing for comfortable operation and versatile trimming positions.

4. Kōkuhu Pūhiko: Ensure the battery (not included) is fully charged. Slide the battery into the battery slot on the main handle until it clicks into place.
   

   Figure 3.3: Detail of the main handle and the battery slot, where a 20V battery (sold separately) is inserted to power the trimmer.

4. Nga Tohutohu Whakahaere

4.1 Timata te Kuti

1. Ensure you are wearing appropriate personal protective equipment (PPE), including safety glasses, gloves, and sturdy footwear.
2. Puritia te kutikuti ki ngā ringa e rua, tētahi ki te kakau matua, tētahi ki te kakau āwhina.
3. Pēhia te patene maukati-atu (mehemea kei reira) ka pehia te pana keu hei timata i te motini.

4.2 Tikanga Kuti

• Nekehia āta haere te kutikuti puta noa i te wāhi e kutikutia ana.
• Maintain a slight angle to the ground for effective cutting.
• Avoid hitting hard objects like stones, fences, or concrete, as this can damage the trimmer line and head.
• The cutting width is approximately 25 cm. Plan your passes accordingly.

4.3 Te Whakamutu i te Kutikuti

Release the trigger switch to stop the motor. The trimmer line will cease rotation.

5. Tiaki

5.1 Te horoi

• Tango i nga wa katoa te pākahiko i mua i te horoi, te mahi tiaki ranei.
• Clean the trimmer head and protective guard after each use to remove grass clippings and debris. Use a damp kakahu; kaua e whakamahi matū kino.
• Ensure ventilation slots are clear of obstructions to prevent overheating.

5.2 Replacing the Trimmer Line Spool

When the trimmer line becomes too short or breaks, it needs to be replaced. This model uses a specific type of line spool.

1. Tangohia te pākahiko mai i te kuti.
2. Locate the spool cover on the trimmer head.
3. Press the tabs or twist the cover to remove it.
4. Tangohia te peihana tawhito.
5. Insert a new, pre-wound trimmer line spool, ensuring the line feeds through the eyelet.
6. Whakahokia te taupoki o te pōro, me te whakarite kia pāwhiri mau ki tōna wāhi tika.

Figure 5.1: Images of replacement trimmer line spools, indicating the type of spool required for this model.

Whakaahua 5.2: Runga me raro views of the trimmer head, showing the line exit points and the spool housing.

6. Te Raru

This section provides solutions to common issues you might encounter with your grass trimmer.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

Information regarding product warranty and customer support was not available in the provided product details. Please refer to the official Parkside documentation included with your purchase or visit the manufacturer's website for warranty terms, registration, and support contact information.