1. Hua Neke Atuview
The Hansgrohe Vernis Blend electronic basin mixer is designed for hygienic and efficient cold water delivery. Featuring an infrared sensor for contactless operation, this battery-powered faucet is ideal for public and semi-public washrooms, as well as private settings where hygiene and water conservation are priorities. Its EcoSmart technology enriches the water with air, providing a full, soft jet while significantly reducing water consumption. The pre-set temperature function ensures safe and comfortable hand washing without the need for a separate control lever.
Image: Hansgrohe Vernis Blend electronic basin mixer in a public restroom setting.
2. Nga korero haumaru
Please read this manual carefully before installation and use. Keep these instructions for future reference.
- Ensure all installation steps are performed by qualified personnel and in accordance with local plumbing and electrical codes.
- Do not modify the product. Use only genuine Hansgrohe spare parts.
- Tiakina te hua mai i te hukapapa.
- The battery compartment must remain dry. Do not expose the battery to excessive heat or direct sunlight.
- Clean the product only with recommended cleaning agents to avoid damage to the chrome finish.
3. Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- Electronic basin whakaranu
- Maunga taputapu
- Connection hoses (flexible, G 3/8)
- Dirt strainers
- Kariri katiti
- 1 x CR-P2 6V Lithium battery
4. Tatūnga me te Tāuta
This section outlines the general installation procedure. Refer to the detailed technical drawing for precise measurements and connections.
- Whakapaia te Pae Tāuta: Ensure the mounting surface is clean and stable. The mixer is designed for surface mounting.
- Install the Mixer: Whakamaua te basin mixer to the sink or countertop using the provided mounting material. Ensure the mixer is centered and stable.
- Tūhono Tuku Wai: Connect the flexible G 3/8 connection hoses to the cold water supply line (DN15). Ensure all connections are tight to prevent leaks.
- Whakauruhia te Pataha: Open the battery compartment, insert the included CR-P2 6V Lithium battery, and close the compartment securely.
- Flush Lines: Before final use, briefly flush the water lines to remove any debris.
- Taumahinga Whakamatau: Turn on the water supply and test the sensor functionality.
Image: Technical drawing with dimensions (in mm) for installation planning.
5. Nga Tohutohu Whakahaere
The Vernis Blend electronic basin mixer operates automatically via an infrared sensor.
- Whakahohenga Pūoko: Place your hands within the sensor's detection range (typically below the spout). The water flow will start automatically.
- Katia Aunoa: The water flow will stop automatically once your hands are removed from the sensor's range. The mixer can be configured for specific flow durations (10, 20, or 30 seconds) to optimize water usage.
- Hangarau Atamai Taiao: The integrated EcoSmart technology mixes air into the water stream, creating a voluminous and soft jet while reducing water consumption.
- Tautuhi-mua-Pamahana: This model delivers cold water only, with a pre-set temperature for consistent use.
Image: Sensor activation for hygienic use.
Image: AirPower technology for less water splashing.
6. Tiaki
Regular maintenance ensures optimal performance and longevity of your basin whakaranu.
- Te horoi: Clean the chrome finish regularly with a soft cloth and a mild, non-abrasive cleaning agent. Avoid cleaners containing acids, chlorine, or abrasive particles, as these can damage the surface.
- Whakakapinga Pūhiko: When the battery is low, the sensor's indicator light may flash, or the water flow may become inconsistent. Replace the CR-P2 6V Lithium battery as needed.
- Ngā Tātari Paru: Periodically check and clean the dirt strainers located in the connection hoses to prevent reduced water flow.
- Whakakorenga Weariki: The mixer supports thermal disinfection procedures. Consult a professional for details on performing this function if required for public health standards.
7. Te Raru
If you encounter issues with your basin mixer, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore he rere wai | Battery depleted; Water supply off; Sensor obstructed | Replace battery; Check water supply valve; Clear sensor area |
| Te rere wai tonu | Kua arai, kua he ranei | Clear sensor area; Contact support if issue persists |
| Te rere wai ngoikore | Dirt strainers clogged; Aerator clogged | Clean dirt strainers; Clean or replace aerator |
| Kāore te pūoko i te whakautu | Battery low; Sensor dirty; Object in sensor range | Replace battery; Clean sensor window; Remove obstructions |
If these solutions do not resolve the issue, please contact Hansgrohe customer support.
8. Whakatakotoranga
| Kaihanga | Hansgrohe |
| Tau tauira | 71502000 |
| Rahi Hua (L x W x H) | 15.8 x 5.7 x 12.2 cm |
| Taumaha | 1.29 Kirokaramu |
| Pūhiko | 1 x CR-P2 6V Lithium (included) |
| Tae | Chrome |
| Kāhua | With temperature pre-setting (cold water only) |
| Whakaoti | Chrome |
| Rauemi | Synthetic, Metal |
| Tikanga Tāuta | Whakapiki mata |
| Te maha o nga Kohao | 1 |
| Te Whanui | 100 Mirimita |
| Nga waahanga motuhake | Contactless operation |
| Nga Whakamahinga Manakohia | Whare kaukau |
9. Pūtāhui me te Tautoko
Hansgrohe provides a comprehensive warranty and support for its products.
- Pūtāhui a te Kaihanga: E rua tau te roa o te whakamana a te kaihanga mō tēnei hua. Puritia tō taunakitanga hoko mō ngā kereme whakamana.
- Wāhanga Wāhanga Wātea: Hansgrohe ensures the availability of spare parts for up to 15 years after the discontinuation of the product line, providing long-term support for your investment.
- Tautoko Kiritaki: For technical assistance, warranty claims, or further information, please visit the official Hansgrohe webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko.
